Review
The 2.5-ton Goodman gas furnace and air conditioner combo occupies the practical middle ground of residential HVAC. At $2,466, it delivers current-generation efficiency without flagship pricing, making it attractive for contractors specifying systems on competitive bids. The downflow configuration suits attic, closet, and utility room installations common in remodels and new construction where space and duct routing matter.
Performance specs read solidly across the board. The furnace achieves 96% AFUE with a two-stage burner and 60,000 BTU heating capacity, while the 2.5-ton condenser handles 30,000 BTU cooling at 13 SEER. The variable-speed ECM blower reaches 1200 CFM maximum and adapts output intelligently, reducing runtime noise and part-load electricity draw. Energy Star certification confirms these ratings meet EPA thresholds. Single-stage compressor design keeps costs down but sacrifices the modulation efficiency of pricier units.
Pros & Cons
Pros
- 96% AFUE furnace efficiency means lower heating bills, particularly valuable in northern climates with long winter seasons
- 13 SEER rating and Energy Star certification provide solid cooling efficiency for mid-range residential applications
- Variable-speed ECM blower motor adapts airflow from 0-1200 CFM, improving comfort and reducing energy waste during partial-load operation
- Two-stage burner reduces short cycling and maintains steadier indoor temperatures compared to single-stage alternatives
- PVC exhaust flue compatibility allows flexible ductwork routing, simplifying retrofit installations in existing homes
- 10-year warranty with online registration covers compressor and parts, providing meaningful protection for the investment
Cons
- Single-stage compressor limits cooling modulation, meaning it runs at full capacity until temperature setpoint is reached, less efficient than variable-capacity models
- 73 dB noise level is moderately loud during operation, potentially noticeable in quiet rooms or open-concept layouts
- R454B refrigerant requires technician certification and specialized charging equipment, increasing service costs compared to legacy refrigerants
- 13 SEER is competent but not exceptional; newer systems reach 16-18 SEER, delivering meaningfully lower cooling costs over 15-year equipment life
Who Should Buy
Best For
Contractors and homeowners seeking a balanced heating and cooling system for moderate-sized homes in mixed climates, particularly those replacing 15+ year old equipment where the efficiency jump justifies ROI. This unit works well in downflow applications, attics, or closets where horizontal discharge improves installation flexibility.
Consider Alternatives If
Homeowners prioritizing lowest operating costs over budget should explore 16+ SEER systems, and those in hot climates with extended cooling seasons should consider variable-capacity compressors for better part-load efficiency.
Installation
Installation requires standard HVAC procedures but presents modern complexity. The 115V, single-phase electrical demand suits most residential panels, though breaker sizing between 16.7 and 25 amps demands proper load calculation. R454B refrigerant charging requires EPA Section 608 certification. Suction and liquid lines measure 3/4 inch and 3/8 inch respectively, with 50-foot insulated suction line included. PVC exhaust flue compatibility simplifies venting in tight spaces.
Warranty & Reliability
The 10-year parts and compressor warranty activates with online registration, covering manufacturing defects and component failure. This is standard coverage in the mid-range market and provides reasonable protection against unexpected expense, though it excludes wear items like capacitors and contactor coils. Registration is straightforward and strongly recommended by contractors handling the install.
Specifications
| SKU | ACIQ-30-EHPD-UPG |
| Brand/Manufacturer | ACiQ |
| Cooling BTU | 30,000 |
| Heating BTU | 60,000 |
| Refrigerant | R454B |
| Electrical | 115 V. 1 Phase 60 Hz |
| Warranty | 10 Years with Online Registration |
| Decibel Level (dBA) | 73 |
| Weight (in lbs) | 120.000000 |
| Feature | Spec |
| Energy Star | Yes |
| SEER1 (Efficiency) | 13 |
| Condenser Stages | Single Stage |
| Compressor Type | Reciprocating |
| Liquid Line | 3/8" |
| Suction Line | 3/4" |
| Liquid Valve Size | 3/8" |
| Max Breaker Size | 25 amps |
| Min. Breaker Size | 16.7 amps |
| Tonnage | 2.5 Ton |
| Valve Type | Sweat |
| Height | 22" |
| Width | 17.5" |
| Depth | 21" |
| Resources | CAPT Installation Manual CAPT Specifications Sheet Goodman Evaporator Coil Warranty You will need Adobe® Acrobat® Reader to view PDF documents. |
| Safety Information | PROPOSITION 65 WARNING This product and many products on our site may contain a chemical know to the state of California to cause cancer or birth defects or other reproductive harm. For more information about Proposition 65 please Click Here. |
| AHRI Certificate Number | 7368838 |
| Airflow Direction | Downflow/Horizontal |
| Exhaust Flue Requirement | Plastic / PVC |
| Product Features | Rebate Available |
| Furnace Efficiency / AFUE | 96% |
| Blower Motor | Variable Speed - ECM |
| Maximum CFM | 1200 |
| Configuration | Upflow / Downflow |
| Burner Stages | Two |
| Fuel Type | Propane, Natural Gas |
| Style | A-Coil |
| Suction Line Insulation Thickness | 3/4" |
| Length | 50 feet |
Frequently Asked Questions
Affiliate disclosure: IndustrialRank earns a commission on qualifying purchases at no extra cost to you. We only recommend products we have independently reviewed.