Review
The Goodman 2.5-ton downflow system represents a thoughtful balance between heating prowess and cooling capability for residential contractors. With an 80,000 BTU furnace paired to a 30,000 BTU air conditioner, this combo addresses year-round comfort without oversizing either component. At $647, it undercuts many name-brand equivalents while maintaining Energy Star certification and respectable component quality that contractors have relied on for decades.
Efficiency numbers tell the real story here. The furnace delivers an exceptional 97% AFUE rating, meaning you recover nearly all combustion energy for heating delivery. On the cooling side, 13 SEER1 performance with R454B refrigerant ensures compliance with forward-looking regulations while the modulating burner and variable-speed ECM blower actively reduce runtime and noise. Maximum airflow reaches 1600 CFM, ample for properly sized ducts in homes under 2,500 square feet.
Pros & Cons
Pros
- 97% AFUE furnace captures nearly all fuel energy, translating to measurably lower heating bills in winter months
- Modulating gas burner and variable-speed ECM blower adapt to demand, reducing energy waste and noise throughout the day
- 13 SEER rating on the 2.5-ton cooling side meets ENERGY STAR requirements with R454B refrigerant for future compliance
- 80,000 BTU heating capacity handles cold climates while 30,000 BTU cooling covers moderate-sized homes efficiently
- Downflow configuration suits basements and closet installations where space is limited, expanding placement options
Cons
- Single-stage compressor on cooling side cannot match the efficiency gains of two-stage or variable units in part-load scenarios
- 73 dB noise level runs slightly louder than inverter-driven competitors, noticeable during peak operation
- Price point at $647 reflects contractor-grade positioning, making it less accessible for DIY homeowners seeking budget options
Who Should Buy
Best For
Contractors building or retrofitting residential systems in climate zones requiring both strong heating and moderate cooling will appreciate the value and reliability here. Homeowners in mixed climates with tight installation spaces and budget consciousness will see real ROI from the 97% furnace efficiency.
Consider Alternatives If
Buyers in extreme cooling zones or those prioritizing absolute silent operation should explore two-stage compressor models or variable-capacity alternatives that command higher prices.
Installation
Installation requires standard HVAC connections: 3/8-inch suction and liquid lines with sweat-type valves, both common in existing systems. The downflow A-coil configuration needs right-side flue venting through plastic PVC pipe, dictating ductwork layout but simplifying space constraints. Electrical demands stay modest at 115V single-phase 60Hz with a 25-amp maximum breaker. Most licensed contractors can complete installation in one day.
Warranty & Reliability
Goodman backs this system with a 10-year parts warranty activated through online registration, a reasonable protection tier for equipment in this price range. The warranty covers defects in materials and workmanship but excludes wear items and installation errors. Registration takes five minutes online and ensures you have documented coverage if components fail during the coverage window.
Specifications
| SKU | ACIQ-30-EHPD-UPG |
| Brand/Manufacturer | ACiQ |
| Cooling BTU | 30,000 |
| Heating BTU | 80,000 |
| Refrigerant | R454B |
| Electrical | 115 V. 1 Phase 60 Hz |
| Warranty | 10 Years with Online Registration |
| Decibel Level (dBA) | 73 |
| Weight (in lbs) | 120.000000 |
| Feature | Spec |
| Energy Star | Yes |
| SEER1 (Efficiency) | 13 |
| Condenser Stages | Single Stage |
| Compressor Type | Reciprocating |
| Liquid Line | 3/8" |
| Suction Line | 3/4" |
| Liquid Valve Size | 3/8" |
| Max Breaker Size | 25 amps |
| Min. Breaker Size | 16.7 amps |
| Tonnage | 3.5 Ton |
| Valve Type | Sweat |
| Height | 30" |
| Width | 21" |
| Depth | 21" |
| Resources | CAPF Installation Manual CAPF Specifications Sheet Goodman Evaporator Coil Warranty You will need Adobe® Acrobat® Reader to view PDF documents. |
| Safety Information | PROPOSITION 65 WARNING This product and many products on our site may contain a chemical know to the state of California to cause cancer or birth defects or other reproductive harm. For more information about Proposition 65 please Click Here. |
| AHRI Certificate Number | 7424271 |
| Airflow Direction | Downflow/Horizontal |
| Exhaust Flue Requirement | Plastic / PVC |
| Product Features | Rebate Available |
| Furnace Efficiency / AFUE | 97% |
| Blower Motor | Variable Speed - ECM |
| Maximum CFM | 1600 |
| Configuration | Upflow / Downflow |
| Flue Location | Right |
| Burner Stages | Modulating |
| Fuel Type | Propane, Natural Gas |
| Style | A-Coil |
| Suction Line Insulation Thickness | 3/4" |
| Length | 50 feet |
Frequently Asked Questions
Affiliate disclosure: IndustrialRank earns a commission on qualifying purchases at no extra cost to you. We only recommend products we have independently reviewed.