2.5 Ton 13 SEER 96% AFUE 60,000 BTU Goodman Gas Furnace and Air Conditioner System - Downflow Review 2026

// Bottom Line

This 2.5-ton Goodman system excels for homeowners replacing aging equipment in moderate climates who want reliable heating and cooling without premium pricing. It's particularly strong for downflow installations in homes with basement or crawlspace placement, where the 34.5-inch height and A-coil configuration fit naturally.

Review

The Goodman 2.5-ton downflow system represents a practical middle ground in the HVAC market. It pairs a 60,000 BTU furnace with a 30,000 BTU air conditioner in a compact A-coil configuration sized for homes between 1,000 and 1,500 square feet. This SKU (ACIQ-30-EHPD-UPG) earned AHRI certification and carries Energy Star qualification, signaling reliable engineering without cutting corners.

The furnace delivers 96% AFUE efficiency through a two-stage burner and variable-speed ECM blower motor, meaning less natural gas wasted as exhaust. On the cooling side, 13 SEER1 with R454B refrigerant provides modern refrigerant compliance and adequate seasonal efficiency. The reciprocating compressor runs at single-stage capacity, which trades modulation flexibility for simpler, proven architecture and lower upfront cost.

Pros & Cons

Pros

96% AFUE heating efficiency reduces winter fuel consumption significantly versus older systems
Two-stage burner and variable-speed ECM blower minimize temperature swings and energy waste
13 SEER cooling with R454B refrigerant meets modern environmental standards
115V single-phase power requires only standard 16.7 to 25 amp breaker, no dedicated 240V line
10-year parts warranty with online registration provides solid peace-of-mind coverage

Cons

13 SEER is respectable but not high-efficiency, higher-tier units reach 16-18 SEER for greater cooling savings
73 dB noise level is moderately loud, some users may notice it more than premium variable-speed competitors
Single-stage compressor cannot modulate capacity, unlike two-stage models that save energy during mild weather

Who Should Buy

Best For

This system fits homeowners in moderate climates replacing standard-efficiency furnaces who want balanced performance and value without climbing into premium price tiers. It's ideal for downflow installations in homes where space is limited and basement or closet placement is required.

Consider Alternatives If

Skip this if you live in extreme climates requiring maximum heating output, need whisper-quiet operation, or prioritize the highest cooling efficiency ratings available.

2.5 Ton 13 SEER 96% AFUE 60,000 BTU Goodman Gas Fu

$2466

Buy at HVACDirect →

Installation

Downflow configuration requires placement above the space being heated, making basements or attics ideal. The unit measures 34.5 inches tall and weighs 120 pounds, fitting standard openings. Sweat valve connections use 3/8-inch and 3/4-inch lines, and PVC plastic exhaust flue is required. Most HVAC contractors finish installation in four to six hours for straightforward replacements.

Warranty & Reliability

Goodman provides 10 years of parts coverage when you register the unit online within 30 days of installation. This covers compressor, heat exchanger, and electrical components but typically excludes labor. Registration is mandatory and straightforward through Goodman's website, making this warranty accessible to most homeowners.

Specifications

SKU	ACIQ-30-EHPD-UPG
Brand/Manufacturer	ACiQ
Cooling BTU	30,000
Heating BTU	60,000
Refrigerant	R454B
Electrical	115 V. 1 Phase 60 Hz
Warranty	10 Years with Online Registration
Decibel Level (dBA)	73
Weight (in lbs)	120.000000
Feature	Spec
Energy Star	Yes
SEER1 (Efficiency)	13
Condenser Stages	Single Stage
Compressor Type	Reciprocating
Liquid Line	3/8"
Suction Line	3/4"
Liquid Valve Size	3/8"
Max Breaker Size	25 amps
Min. Breaker Size	16.7 amps
Tonnage	2.5 Ton
Valve Type	Sweat
Height	34.5"
Width	17.5"
Depth	28.75"
Resources	Goodman Brochure Goodman Installation Instructions Goodman Parts Manual Goodman Service Manual Goodman Specifications Goodman Technical Information Goodman User Information Goodman Warranty You will need AdobeÂ® AcrobatÂ® Reader to view PDF documents.
Safety Information	PROPOSITION 65 WARNING This product and many products on our site may contain a chemical know to the state of California to cause cancer or birth defects or other reproductive harm. For more information about Proposition 65 please Click Here.
Configuration	Downflow/Horizontal
Style	A-Coil
AHRI Certificate Number	7368838
Airflow Direction	Downflow/Horizontal
Exhaust Flue Requirement	Plastic / PVC
Product Features	Rebate Available
Furnace Efficiency / AFUE	96%
Blower Motor	Variable Speed - ECM
Maximum CFM	1200
Burner Stages	Two
Fuel Type	Propane, Natural Gas
Suction Line Insulation Thickness	3/4"
Length	50 feet

Frequently Asked Questions

What size home is this 2.5-ton system rated for? +

A 2.5-ton system handles approximately 1,000 to 1,500 square feet depending on insulation, climate zone, and ductwork. The 60,000 BTU furnace and 30,000 BTU air conditioner are balanced for this range. Have a contractor perform a Manual J load calculation for your specific home before purchasing.

Does this require 240-volt electrical service like most air conditioners? +

No, this unit runs on standard 115-volt single-phase power, requiring only a 16.7 to 25 amp dedicated breaker. This eliminates the cost and complexity of running new 240V service, a significant advantage in retrofit applications.

How does 96% AFUE compare to my older furnace? +

Systems over 15 years old typically run 78 to 82% AFUE, meaning 14 to 18% of fuel becomes wasted heat up the chimney. This 96% unit cuts that waste dramatically, saving 10 to 15% annually on heating costs in most climates.

Is 13 SEER good enough, or should I pay more for 16 SEER? +

13 SEER is reliable and meets code nationally. 16-plus SEER models cost 30 to 50% more and save roughly 20% on cooling costs. In moderate climates, payback exceeds 10 years, making this 13 SEER a strong financial choice.

What does the 10-year warranty actually cover? +

Parts only, including compressor, heat exchanger, and electrical components. Labor is not covered. Registration within 30 days is required. Read the full warranty document before purchase to understand limitations clearly.

Affiliate disclosure: IndustrialRank earns a commission on qualifying purchases at no extra cost to you. We only recommend products we have independently reviewed.