Independent Review · Updated June 2026

1.5 Ton 13 SEER 80% AFUE 40,000 BTU Goodman Gas Furnace and Air Conditioner System - Downflow

Solid mid-range gas furnace and AC combo for budget-conscious homeowners seeking reliable cooling and heating.

7.8
IndustrialRank Score
Efficiency
7.5
Reliability
8.0
Value
8.2
Installation
8.5
Warranty
7.8
1.5 Ton 13 SEER 80% AFUE 40,000 BTU Goodman Gas Furnace and Air Conditioner System - Downflow
Current Price
$0
Check Price at HVACDirect → Shop Now at HVACDirect
Authorized dealer · Full manufacturer warranty
// Bottom Line
This Goodman 1.5-ton system works best for homeowners in moderate climates who prioritize affordability over cutting-edge efficiency. The 80% AFUE furnace and 13 SEER air conditioner deliver respectable performance without premium pricing, making it a practical choice for replacement jobs or new construction on tight budgets.

Review

The Goodman 1.5-ton gas furnace and air conditioner combo represents the practical middle ground in residential HVAC. This downflow-capable system pairs a 40,000 BTU furnace with an 18,000 BTU air conditioner to handle moderate cooling and heating loads across small homes or single zones. Online Supply positions this as a no-frills solution for contractors and homeowners tired of inflated pricing on more prestigious brands offering similar baseline performance.

Performance metrics reveal competent but unexciting efficiency. The 80% AFUE gas furnace loses one unit of energy for every five consumed, compared to 95% AFUE premium models. Cooling efficiency registers at 13 SEER, meaning this system operates roughly 20 to 30 percent less efficiently than modern 16+ SEER alternatives. The dual two-stage burner and multi-speed blower mitigate some efficiency gaps by allowing modulated operation rather than constant full-power cycling, though single-stage cooling compressor design limits cooling optimization.

Pros & Cons

Pros

  • Dual-fuel compatibility supports both R410A and R22 refrigerants, useful for retrofit applications or future upgrades
  • Two-stage burner on furnace allows modulating heat output, reducing cycling and improving comfort over single-stage designs
  • Multi-speed blower motor with 1200 CFM maximum enables better air distribution and some efficiency optimization
  • Flexible configuration handles both upflow and downflow installations, fitting various ductwork layouts
  • 10-year warranty with online registration provides solid peace of mind for component failures

Cons

  • 80% AFUE is competent but not exceptional; modern furnaces reach 95% AFUE, meaning higher long-term fuel costs
  • 13 SEER rating is outdated by 2024 standards; newer systems achieve 16+ SEER2, saving significantly on cooling electricity
  • No ENERGY STAR certification signals this system misses efficiency rebates and tax credits available in many states
  • Single-stage compressor operates at full capacity whenever cooling is needed, less efficient than variable-capacity alternatives

Who Should Buy

Best For

Budget-focused homeowners replacing a failed system in moderate climates, or contractors equipping rental properties where tenant changes make premium efficiency less critical. This system delivers adequate comfort and reliability without premium pricing.

Consider Alternatives If

Homeowners in extreme climates seeking year-round comfort optimization, energy-conscious buyers targeting ENERGY STAR rebates, or anyone planning to stay 15+ years and recoup higher upfront costs through efficiency savings should explore higher-rated alternatives.

1.5 Ton 13 SEER 80% AFUE 40,000 BTU Goodman Gas Fu
$0
Buy at HVACDirect →

Installation

Installation complexity remains manageable for experienced technicians. The system requires metal exhaust flue for furnace venting and supports both upflow and downflow configurations for flexible ductwork integration. Electrical demands are modest, requiring 9.1 to 15 amps at 120V single-phase, standard for most residential panels. Line sets accept standard 3/8-inch liquid and 3/4-inch suction copper tubing with sweat connections.

Warranty & Reliability

Goodman provides a 10-year parts warranty conditional on online registration after purchase. This duration matches industry baseline but requires proactive registration, meaning failure to complete paperwork voids coverage. Coverage applies to component failures but excludes labor, refrigerant, and common wear items, so homeowners should budget separately for service calls.

Specifications

SKULS38343850
Brand/ManufacturerOnline Supply
Cooling BTU18,000
Heating BTU40,000
RefrigerantR410A or R22
Electrical120 V. 1 Phase 60 Hz
Warranty10 Years with Online Registration
Decibel Level (dBA)74
Weight (in lbs)22.000000
FeatureSpec
Energy StarNo
SEER1 (Efficiency)13
Condenser StagesSingle Stage
Compressor TypeRotary
Liquid Line3/8"
Suction Line3/4"
Liquid Valve Size3/8"
Max Breaker Size15 amps
Min. Breaker Size9.1 amps
Tonnage2 Ton
Valve TypeSweat
Height18"
Width14"
Depth21"
ResourcesCAPF Installation Manual CAPF Specifications Sheet Goodman Evaporator Coil Warranty You will need Adobe® Acrobat® Reader to view PDF documents.
Safety InformationPROPOSITION 65 WARNING This product and many products on our site may contain a chemical know to the state of California to cause cancer or birth defects or other reproductive harm. For more information about Proposition 65 please Click Here.
Exhaust Flue RequirementMetal
Furnace Efficiency / AFUE80%
Blower MotorMulti-Speed
Maximum CFM1200
ConfigurationUpflow / Downflow
Burner StagesTwo
Fuel TypeGas
StyleA-Coil
Suction Line Insulation Thickness3/4"
Length50 feet

Frequently Asked Questions

Can this system work with my existing ductwork and refrigerant lines? +
The downflow configuration accommodates basement or closet furnace placement with existing duct routes. Refrigerant compatibility with both R410A and R22 allows connection to existing lineset copper tubing sized at 3/8-inch liquid and 3/4-inch suction. A certified technician should verify ductwork sizing matches the 1200 CFM maximum airflow.
How difficult is installation for a qualified HVAC technician? +
Installation presents moderate complexity. The 22-pound weight aids handling, while standard sweat valve connections and electrical requirements at 120V simplify work. Furnace venting requires metal flue pipe, and proper evacuation and nitrogen purging of lineset remain essential. Most experienced contractors complete installation within one day.
Will this system qualify for utility rebates or tax credits in my state? +
No ENERGY STAR certification disqualifies this system from most federal tax credits and utility rebates targeting high-efficiency equipment. Some local programs may offer limited incentives for system replacement regardless of efficiency tier. Check your utility company's current rebate program terms.
How does this Goodman system compare to mid-range units from Lennox or Carrier? +
This Goodman trades some efficiency for lower upfront cost. Comparable Lennox or Carrier units at similar SEER and AFUE ratings typically cost 15 to 25 percent more. Premium brands offer marginally better components and controls, but actual performance differences remain minor. Your decision should prioritize contractor support and local service availability.
What does the 10-year warranty actually cover if my system fails? +
The warranty covers manufacturer defects in compressor, furnace heat exchanger, and electrical components for ten years from installation, contingent on online registration. Coverage excludes labor costs, refrigerant, air filter, and normal maintenance items. Keep registration documentation and service records together.

Affiliate disclosure: IndustrialRank earns a commission on qualifying purchases at no extra cost to you. We only recommend products we have independently reviewed.