1.5 Ton 14 SEER 80% AFUE 60,000 BTU Goodman Gas Furnace and Air Conditioner System - Upflow Review 2026

// Bottom Line

This Goodman 1.5 ton system works best for homeowners replacing older equipment on a tight budget or contractors needing a reliable baseline unit for smaller homes. The 80% AFUE and 14 SEER ratings deliver respectable efficiency without premium pricing, though you're paying for function over advanced features.

Review

The Goodman 1.5 ton upflow gas furnace and air conditioner system sits comfortably in the reliable mid-range segment where many contractors and homeowners land their purchasing decisions. At $0 cost from Online Supply (pricing varies by region), this unit delivers straightforward performance without unnecessary complexity. The compact dimensions (22 inches high, 14 inches wide, 21 inches deep) fit standard closet installations, and the top-mounted metal flue simplifies venting in most homes.

Efficiency numbers tell a practical story here. The 80% AFUE gas furnace provides 60,000 BTU heating output, reasonable for homes under 2,000 square feet. The air conditioner achieves 14 SEER with 18,000 BTU cooling capacity and R410A refrigerant compatibility. Maximum airflow reaches 1,200 CFM through a multi-speed PSC blower, though the single-stage compressor means less adaptive cooling during mild weather. Noise levels run 71 decibels, typical for this efficiency class.

Pros & Cons

Pros

14 SEER cooling efficiency keeps energy bills reasonable at 18,000 BTU capacity
80% AFUE gas furnace heating for solid cold-climate performance
Multi-speed PSC blower motor allows better airflow control than fixed-speed alternatives
10-year warranty with online registration covers major components adequately
Straightforward single-stage burner and compressor design means fewer failure points

Cons

Not ENERGY STAR certified, missing out on rebates available for higher-efficiency models
Single-stage cooling and heating limit part-load efficiency during mild weather operation
Spec sheet shows tonnage discrepancy (1.5 ton listed alongside 3 ton spec, creating confusion)

Who Should Buy

Best For

Homeowners with 1,200 to 1,500 square foot single-story homes in mixed climates who need reliable equipment without overspending. Contractors serving price-sensitive customers or rental properties where straightforward reliability matters more than premium efficiency.

Consider Alternatives If

Buyers seeking ENERGY STAR qualification for rebates, those in extreme climates requiring variable-speed performance, or homes larger than 2,000 square feet needing multi-stage modulation.

1.5 Ton 14 SEER 80% AFUE 60,000 BTU Goodman Gas Fu

Buy at HVACDirect →

Installation

This system requires 208/230V single-phase 60Hz power with breaker sizing between 12 and 30 amps, standard for most residential panels. The upflow configuration works for basement or closet placement. Refrigerant lines include 3/8 inch liquid and 3/4 inch suction lines with matching valve sizes. The A-coil style pairs with most standard indoor furnace housings. Installation complexity stays moderate for certified technicians familiar with Goodman equipment.

Warranty & Reliability

Goodman's 10-year parts warranty activates upon online registration, protecting major components without surprise failures during the critical first decade. This covers the compressor, heat exchanger, and blower assembly. The coverage is solid for the price point but trails premium brands offering 12-year or longer protection. Registration is mandatory, so document your purchase immediately.

Specifications

SKU	LS38343850
Brand/Manufacturer	Online Supply
Cooling BTU	18,000
Heating BTU	60,000
Refrigerant	R410A or R22
Electrical	208 / 230 V. 1 Phase 60 Hz
Warranty	10 Years with Online Registration
Decibel Level (dBA)	71
Weight (in lbs)	22.000000
Feature	Spec
Airflow Direction	Upflow/Horizontal
Exhaust Flue Requirement	Metal
Furnace Efficiency / AFUE	80%
Blower Motor	Multi Speed - PSC
Maximum CFM	1200
Configuration	Upflow / Downflow
Flue Location	Top
Burner Stages	Single
Fuel Type	Gas
Height	22"
Width	14"
Depth	21"
Resources	CAPF Installation Manual CAPF Specifications Sheet Goodman Evaporator Coil Warranty You will need Adobe® Acrobat® Reader to view PDF documents.
Safety Information	PROPOSITION 65 WARNING This product and many products on our site may contain a chemical know to the state of California to cause cancer or birth defects or other reproductive harm. For more information about Proposition 65 please Click Here.
Energy Star	No
SEER1 (Efficiency)	14
Condenser Stages	Single Stage
Compressor Type	Rotary
Liquid Line	3/8"
Liquid Valve Size	3/8"
Suction Valve Size	3/4"
Max Breaker Size	30 amps
Min. Breaker Size	12 amps
Tonnage	3 Ton
Suction Line	3/4"
Style	A-Coil
Suction Line Insulation Thickness	3/4"
Length	50 feet

Frequently Asked Questions

Is this 1.5 ton or 3 ton capacity, and which is correct? +

The system is 1.5 ton for cooling (18,000 BTU). The 3 ton specification in the data appears to be a catalog error. Verify capacity with your supplier before purchase. Tonnage directly affects what home size the unit can properly cool, so clarify this before installation.

Can this system work in both upflow and downflow positions? +

The spec lists upflow/horizontal airflow direction as primary. While Goodman furnaces often support multiple orientations, confirm downflow compatibility with your supplier before planning installation. Wrong orientation reduces efficiency and may void the warranty.

How does 14 SEER compare to modern high-efficiency systems? +

14 SEER is mid-tier performance. Current high-efficiency units reach 16-20 SEER, cutting cooling costs 15-30 percent more. You're trading energy savings for lower upfront cost here, making sense for budget-conscious buyers or rental properties with shorter ownership timelines.

Why is this system not ENERGY STAR certified? +

ENERGY STAR requires 15 SEER minimum for air conditioners and typically 85% AFUE or higher for furnaces. This unit misses both thresholds by small margins. Missing certification disqualifies you from many utility rebate programs worth $500-$1,500 in some regions.

What does the 10-year warranty actually cover? +

The warranty protects parts defects including compressor, heat exchanger, and blower components after online registration. Labor and refrigerant are typically not covered. Read the full terms before installation to understand exclusions and claim procedures.

Affiliate disclosure: IndustrialRank earns a commission on qualifying purchases at no extra cost to you. We only recommend products we have independently reviewed.