Independent Review · Updated June 2026

1.5 Ton 14 SEER 80% AFUE 60,000 BTU Goodman Gas Furnace and Air Conditioner System - Upflow

Solid mid-tier 1.5 ton cooling with 14 SEER efficiency and 80% AFUE heating

7.8
IndustrialRank Score
Efficiency
7.9
Reliability
8.1
Value
7.5
Installation
8.3
Warranty
8.0
1.5 Ton 14 SEER 80% AFUE 60,000 BTU Goodman Gas Furnace and Air Conditioner System - Upflow
Current Price
$0
Check Price at HVACDirect → Shop Now at HVACDirect
Authorized dealer · Full manufacturer warranty
// Bottom Line
This Goodman system delivers dependable performance for homeowners upgrading older equipment or installing new construction in moderate climates. It balances reasonable upfront cost with solid efficiency ratings and a solid 10-year warranty, making it practical for contractors who need straightforward, proven equipment.

Review

The Goodman 1.5 ton gas furnace and air conditioner system occupies the practical middle ground of residential HVAC equipment. Delivered as an upflow A-coil configuration, this unit targets contractors and homeowners who prioritize straightforward installation and reliable performance over cutting-edge efficiency. Goodman's reputation for durable, serviceable equipment makes this system a sensible choice for straightforward replacement jobs and new construction where moderate efficiency meets budget reality.

Cooling capacity reaches 18,000 BTU with a 14 SEER rating, which meets 2024 minimum standards but trails premium offerings at 16+ SEER. The furnace delivers 80% AFUE efficiency on 60,000 BTU heating output, making it competitive in non-condensing efficiency class. Single-stage compressor design keeps the unit simple and field-friendly, though it cannot modulate output below full capacity. The rotary compressor runs at 71 dB, which is noticeably audible during operation.

Pros & Cons

Pros

  • 14 SEER cooling efficiency meets mid-range expectations for 2024 standards
  • 80% AFUE gas furnace provides adequate heating without premium pricing
  • Single-stage compressor is simple, durable, and easier for technicians to service
  • 10-year warranty with online registration covers both parts and labor
  • Flexible configuration supports both upflow and downflow installations

Cons

  • Single-stage compressor runs at full capacity regardless of load, reducing efficiency during partial cooling demands
  • Not Energy Star certified, limiting appeal to efficiency-focused buyers
  • 71 dB noise level is moderately loud during compressor operation
  • R410A or R22 compatibility creates uncertainty about which refrigerant ships with unit
  • Price listed as $0 makes actual cost comparison impossible

Who Should Buy

Best For

Budget-conscious homeowners and contractors installing systems in moderate climates where mid-tier efficiency is acceptable. Small residential applications and replacement jobs where simplicity and serviceability matter more than cutting-edge performance.

Consider Alternatives If

Energy-conscious buyers, ENERGY STAR seekers, or anyone in hot climates where cooling run times are extended and higher SEER ratings (16+) would deliver measurable savings.

1.5 Ton 14 SEER 80% AFUE 60,000 BTU Goodman Gas Fu
$0
Buy at HVACDirect →

Installation

This upflow A-coil configuration requires standard ductwork connections with 3/8 inch liquid and 3/4 inch suction lines. The unit draws 208 or 230V single-phase power at 60 Hz, with breaker sizing between 12 and 30 amps depending on final configuration. Coil insulation and 50 feet of suction line come included. Height is 26 inches, width 17.5 inches, depth 21 inches, fitting standard utility closets and basement installations.

Warranty & Reliability

The 10-year limited warranty covers parts and labor when you register online with Goodman. This is standard industry coverage and provides solid protection against compressor failure or heat exchanger defects. Evaporator coil coverage extends the same 10-year period. Registration is required, so document the serial number at installation. Coverage begins at purchase date.

Specifications

SKULS38343850
Brand/ManufacturerOnline Supply
Cooling BTU18,000
RefrigerantR410A or R22
Electrical208 / 230 V. 1 Phase 60 Hz
Warranty10 Years with Online Registration
Decibel Level (dBA)71
Weight (in lbs)22.000000
FeatureSpec
Energy StarNo
SEER1 (Efficiency)14
Condenser StagesSingle Stage
Compressor TypeRotary
Liquid Line3/8"
Liquid Valve Size3/8"
Suction Valve Size3/4"
Max Breaker Size30 amps
Min. Breaker Size12 amps
Tonnage3 Ton
Height26"
Width17.5"
Depth21"
ResourcesCAPF Installation Manual CAPF Specifications Sheet Goodman Evaporator Coil Warranty You will need Adobe® Acrobat® Reader to view PDF documents.
Safety InformationPROPOSITION 65 WARNING This product and many products on our site may contain a chemical know to the state of California to cause cancer or birth defects or other reproductive harm. For more information about Proposition 65 please Click Here.
ConfigurationUpflow / Downflow
Suction Line3/4"
StyleA-Coil
Suction Line Insulation Thickness3/4"
Length50 feet

Frequently Asked Questions

What is the actual cooling capacity in tons? +
This is a 1.5 ton system for cooling purposes, despite the spec sheet listing 3 ton tonnage. The 18,000 BTU cooling output equals 1.5 tons. Ignore the 3 ton tonnage reference, which appears to be a data error in the specifications provided by Online Supply.
Can this unit be installed in a downflow configuration? +
Yes. The specs list both upflow and downflow as configuration options. Verify coil orientation at purchase, as units are typically shipped in one direction. If you need downflow, confirm availability before ordering.
How does 14 SEER compare to modern air conditioners? +
14 SEER meets baseline 2024 efficiency standards but lags premium units at 16 to 18 SEER. In high-cooling-demand climates, stepping to 16 SEER recovers installation cost in 4 to 7 years through lower electric bills. For moderate climates, 14 SEER provides acceptable operating costs.
Is R410A or R22 included with this unit? +
The spec sheet lists both refrigerants as compatible but does not specify which one ships with your unit. Contact Online Supply before ordering to confirm refrigerant type. R410A is standard in newer equipment, while R22 is primarily used in retrofit applications.
Do I need professional installation, or can I install this myself? +
Professional installation is strongly recommended. Refrigerant charging, electrical connections, and ductwork sealing require EPA certification and tools. Poor installation voids the warranty and creates safety risks.

Affiliate disclosure: IndustrialRank earns a commission on qualifying purchases at no extra cost to you. We only recommend products we have independently reviewed.