Review
Goodman's 1.5-ton system pairs an air-cooled condenser with a gas furnace in one upflow-compatible package. This combination targets the contractor and homeowner segment prioritizing affordability over cutting-edge efficiency. The 14 SEER cooling rating sits comfortably above minimum federal standards, while the 80% AFUE gas furnace delivers functional heating without condensing technology's complexity or cost. Online Supply distributes this SKU LS38343850 as an accessible entry point for new construction and replacements.
Performance specs reveal practical, if not exceptional, engineering. The condenser produces 18,000 BTU cooling capacity using R410A or R22 refrigerant through a single-stage rotary compressor. Heating reaches 80,000 BTU with two burner stages and a multi-speed blower reaching 1,200 CFM maximum airflow. The 3/8-inch liquid lines and 3/4-inch suction lines follow standard sizing. Electrical demands remain modest at 120V single-phase 60Hz with a 12 to 30-amp breaker range, simplifying installation in existing homes.
Pros & Cons
Pros
- 14 SEER cooling efficiency exceeds baseline standards and qualifies for many rebate programs
- 80,000 BTU heating output with two-stage burner adapts to varying demand, reducing short-cycling
- Multi-speed blower motor allows better control over airflow distribution and temperature consistency
- Two-ton tonnage mismatch provides flexibility for upflow or horizontal attic installations
- 10-year warranty with online registration covers both compressor and parts comprehensively
Cons
- 80% AFUE furnace efficiency trails modern 95%+ condensing units, costing more in heating fuel over time
- No ENERGY STAR certification limits eligibility for certain utility rebates and tax incentives
- Single-stage compressor delivers less precise cooling modulation compared to variable-capacity alternatives
- 71 dB noise level runs louder than quieter inverter-driven competitors during operation
Who Should Buy
Best For
Budget-conscious contractors installing systems in rental properties where upfront cost matters more than long-term efficiency gains. Homeowners in moderate climates seeking reliable heating and cooling without premium efficiency features.
Consider Alternatives If
Buyers in cold climates requiring maximum heating efficiency, those needing ENERGY STAR rebates, or homeowners prioritizing whisper-quiet operation.
Installation
Upflow installation requires minimal clearance above the coil and enough lateral space for the 17.5-inch width and 28.75-inch depth unit. The 3/4-inch suction line insulation comes pre-fitted, reducing fieldwork. Technicians need metal exhaust flue ducting for proper venting. A-coil orientation works with most existing ductwork layouts. Weighing 22 pounds, this condenser handles easier than larger two-ton models, reducing installation labor on steep roofs.
Warranty & Reliability
Goodman backs this system with a full 10-year warranty covering compressor failure and parts replacement when registered online. This duration matches industry standard offerings from major manufacturers. Registration through Goodman's portal is required to activate coverage, so buyers must complete paperwork promptly after installation. Labor costs during warranty claims may not be covered, so review specific policy terms with your installer.
Specifications
| SKU | LS38343850 |
| Brand/Manufacturer | Online Supply |
| Cooling BTU | 18,000 |
| Heating BTU | 80,000 |
| Refrigerant | R410A or R22 |
| Electrical | 120 V. 1 Phase 60 Hz |
| Warranty | 10 Years with Online Registration |
| Decibel Level (dBA) | 71 |
| Weight (in lbs) | 22.000000 |
| Feature | Spec |
| Energy Star | No |
| SEER1 (Efficiency) | 14 |
| Condenser Stages | Single Stage |
| Compressor Type | Rotary |
| Liquid Line | 3/8" |
| Liquid Valve Size | 3/8" |
| Suction Valve Size | 3/4" |
| Max Breaker Size | 30 amps |
| Min. Breaker Size | 12 amps |
| Tonnage | 3 Ton |
| Height | 34.5" |
| Width | 17.5" |
| Depth | 28.75" |
| Resources | Goodman Brochure Goodman Installation Manual Goodman Parts Manual Goodman Service Manual Goodman Specifications Goodman Technical Information Goodman User Information Goodman Warranty You will need Adobe® Acrobat® Reader to view PDF documents. |
| Safety Information | PROPOSITION 65 WARNING This product and many products on our site may contain a chemical know to the state of California to cause cancer or birth defects or other reproductive harm. For more information about Proposition 65 please Click Here. |
| Configuration | Upflow/Horizontal |
| Suction Line | 3/4" |
| Style | A-Coil |
| Airflow Direction | Upflow/Horizontal |
| Exhaust Flue Requirement | Metal |
| Furnace Efficiency / AFUE | 80% |
| Blower Motor | Multi-Speed |
| Maximum CFM | 1200 |
| Burner Stages | Two |
| Fuel Type | Gas |
| Suction Line Insulation Thickness | 3/4" |
| Length | 50 feet |
Frequently Asked Questions
Affiliate disclosure: IndustrialRank earns a commission on qualifying purchases at no extra cost to you. We only recommend products we have independently reviewed.