Review
Goodman's 2.5-ton gas furnace and air conditioner system represents the practical middle ground in residential HVAC equipment. This upflow configuration arrives as a complete package from Online Supply at $2552, making it accessible for homeowners and contractors managing renovation budgets. The system combines a 60,000 BTU furnace with a 30,000 BTU cooling capacity, adequate for homes between 2000 and 2500 square feet depending on climate and insulation. Goodman's reputation for straightforward engineering and parts availability supports its popularity in the rental and contractor markets.
Performance metrics tell a practical story. The 80% AFUE furnace rating means 20% of heating energy escapes unused, typical for non-condensing units. The 13 SEER air conditioner operates at minimum federal efficiency standards without premium modulation. Two-stage burners reduce heating cycling and temperature swings compared to single-stage competitors. The variable-speed blower motor adapts to demand, improving comfort in mild weather. At 73 decibels, the unit generates noticeable sound during operation, louder than inverter-type systems. Reciprocating compressor design is proven but requires more maintenance than scroll alternatives.
Pros & Cons
Pros
- 60,000 BTU heating output with two-stage burners covers most residential heating needs efficiently
- 13 SEER cooling rating meets standard efficiency requirements at competitive price point
- Variable speed blower motor improves comfort by reducing temperature swings and cycling
- Two-stage burner design reduces short cycling and improves temperature consistency
- 80% AFUE is solid for non-high-efficiency furnaces, reasonable for budget buyers
- 10-year warranty with online registration provides decent coverage for parts and labor
Cons
- 80% AFUE lags behind modern 95%+ AFUE models, costing more in natural gas over time
- 13 SEER is baseline efficiency, not qualifying for ENERGY STAR or premium rebates
- 73 decibel noise level is louder than inverter-driven competitors, noticeable during operation
- Single-stage compressor cannot modulate cooling capacity, reducing efficiency in mild weather
- Reciprocating compressor design is older technology with higher maintenance expectations
Who Should Buy
Best For
Homeowners replacing older equipment who prioritize upfront savings over long-term operating costs, and contractors needing reliable equipment for budget-conscious clients. This system works well in homes where energy bills are secondary to initial investment.
Consider Alternatives If
Anyone in cold climates requiring frequent heating cycles, homes pursuing ENERGY STAR certification, or buyers planning to stay 10-plus years and wanting lower utility bills should explore higher-efficiency alternatives.
Installation
Installation demands standard HVAC practices. The upflow A-coil configuration suits basement and utility closet placement. Electrically, it requires 120V single-phase 60Hz service with 16.7 to 25 amp breaker sizing. Refrigerant lines use 3/8 inch liquid and 3/4 inch suction connections with sweat valve fittings. The metal exhaust flue requirement adds ducting cost. Unit dimensions of 30 inches high by 17.5 inches wide by 21 inches deep fit standard equipment spaces. R410A refrigerant compatibility supports modern installations.
Warranty & Reliability
Goodman provides 10 years of parts and labor coverage with online registration, standard industry practice. This protects against compressor failure, heat exchanger defects, and component breakdowns during the critical decade. Registration is straightforward through Goodman's website. Extended coverage beyond 10 years requires paid plans. Real-world claims processing is generally efficient given Goodman's established dealer network nationwide.
Specifications
| SKU | LS38343850 |
| Brand/Manufacturer | Online Supply |
| Cooling BTU | 30,000 |
| Heating BTU | 60,000 |
| Refrigerant | R410A or R22 |
| Electrical | 120 V. 1 Phase 60 Hz |
| Warranty | 10 Years with Online Registration |
| Decibel Level (dBA) | 73 |
| Weight (in lbs) | 22.000000 |
| Feature | Spec |
| Energy Star | No |
| SEER1 (Efficiency) | 13 |
| Condenser Stages | Single Stage |
| Compressor Type | Reciprocating |
| Liquid Line | 3/8" |
| Suction Line | 3/4" |
| Liquid Valve Size | 3/8" |
| Max Breaker Size | 25 amps |
| Min. Breaker Size | 16.7 amps |
| Tonnage | 3 Ton |
| Valve Type | Sweat |
| Height | 30" |
| Width | 17.5" |
| Depth | 21" |
| Resources | CAPF Installation Manual CAPF Specifications Sheet Goodman Evaporator Coil Warranty You will need Adobe® Acrobat® Reader to view PDF documents. |
| Safety Information | PROPOSITION 65 WARNING This product and many products on our site may contain a chemical know to the state of California to cause cancer or birth defects or other reproductive harm. For more information about Proposition 65 please Click Here. |
| AHRI Certificate Number | 204633301 |
| Airflow Direction | Upflow/Horizontal |
| Exhaust Flue Requirement | Metal |
| Furnace Efficiency / AFUE | 80% |
| Blower Motor | Variable Speed |
| Maximum CFM | 1600 |
| Configuration | Upflow / Downflow |
| Burner Stages | Two |
| Fuel Type | Propane, Natural Gas |
| Style | A-Coil |
| Suction Line Insulation Thickness | 3/4" |
| Length | 50 feet |
Frequently Asked Questions
Affiliate disclosure: IndustrialRank earns a commission on qualifying purchases at no extra cost to you. We only recommend products we have independently reviewed.