Review
Goodman's 2.5-ton horizontal gas furnace and air conditioner system represents straightforward, no-nonsense HVAC for contractors and property managers. At 60,000 BTU heating and 30,000 BTU cooling capacity, it covers typical single-family homes and small rental units. The horizontal A-coil design and upflow configuration suit attic or crawl space installations common in retrofit work. This is conventional equipment built on proven reciprocating compressor technology rather than cutting-edge variable-capacity systems.
Performance metrics here are middle-of-the-road solid. The furnace delivers 96% AFUE, a respectable jump from older 80-85% efficiency standards and translates to real heating cost savings. The air conditioner's 13 SEER rating is adequate for moderate climates but doesn't approach 15+ SEER high-efficiency units. The single-stage reciprocating compressor handles capacity in a straightforward on-off manner. The multi-speed blower motor at 1200 CFM maximum adapts to both heating and cooling loads reasonably well. For budget-conscious buyers, these specs hit the sweet spot.
Pros & Cons
Pros
- 96% AFUE furnace efficiency reduces heating costs significantly compared to older 80-85% models
- 13 SEER cooling rating meets mid-tier efficiency standards for moderate climates
- Single-stage reciprocating compressor is proven technology with established contractor service networks
- Multi-speed blower motor optimizes airflow across heating and cooling cycles
- Horizontal A-coil configuration simplifies upflow installations in attics and crawl spaces
- 10-year parts warranty with online registration provides reasonable coverage for the price point
Cons
- Single-stage compressor cycles on and off rather than modulating, missing part-load efficiency gains
- 73 dB noise level runs louder than variable-speed competitors, noticeable during operation
- No Energy Star certification indicates it doesn't exceed EPA efficiency thresholds
- R410A or R22 compatibility suggests older system design rather than next-gen refrigerant readiness
- Not suitable for homeowners seeking premium quiet operation or minimal energy bills
Who Should Buy
Best For
This system suits contractors handling replacement work on mid-range residential properties and homeowners in moderate climates who prioritize upfront savings over premium efficiency. It's particularly practical for rental properties, investment homes, and retrofit jobs where simplicity and cost control matter more than cutting-edge technology.
Consider Alternatives If
Skip this unit if you live in extreme hot or cold climates, need whisper-quiet operation, or want the lowest possible utility bills. Homes where Energy Star certification or variable-capacity compressors are priorities should look at higher-tier Goodman or competitor models.
Installation
Installation is straightforward for experienced technicians. The unit requires 115V single-phase 60 Hz power with a 16.7 to 25 amp breaker. Refrigerant line hookups use standard 3/8 inch liquid and 3/4 inch suction lines with sweat valve connections. The plastic PVC exhaust flue vents right-side exit. Dimensions measure 34.5 inches tall, 17.5 inches wide, and 28.75 inches deep, fitting standard attic and horizontal spaces. Documentation includes full installation instructions from Goodman.
Warranty & Reliability
Goodman backs this system with a 10-year parts warranty upon online registration. This provides meaningful coverage for major component failures during the decade following purchase. Labor and refrigerant are typically excluded, so confirm warranty terms with your retailer or installer. The 10-year window is competitive at this price level, though premium brands sometimes extend to 12 or 15 years.
Specifications
| SKU | LS38343850 |
| Brand/Manufacturer | Online Supply |
| Cooling BTU | 30,000 |
| Heating BTU | 60,000 |
| Refrigerant | R410A or R22 |
| Electrical | 115 V. 1 Phase 60 Hz |
| Warranty | 10 Years with Online Registration |
| Decibel Level (dBA) | 73 |
| Weight (in lbs) | 22.000000 |
| Feature | Spec |
| Energy Star | No |
| SEER1 (Efficiency) | 13 |
| Condenser Stages | Single Stage |
| Compressor Type | Reciprocating |
| Liquid Line | 3/8" |
| Suction Line | 3/4" |
| Liquid Valve Size | 3/8" |
| Max Breaker Size | 25 amps |
| Min. Breaker Size | 16.7 amps |
| Tonnage | 2.5 Ton |
| Valve Type | Sweat |
| Height | 34.5" |
| Width | 17.5" |
| Depth | 28.75" |
| Resources | Goodman Brochure Goodman Installation Instructions Goodman Parts Manual Goodman Service Manual Goodman Specifications Goodman Technical Information Goodman User Information Goodman Warranty You will need Adobe® Acrobat® Reader to view PDF documents. |
| Safety Information | PROPOSITION 65 WARNING This product and many products on our site may contain a chemical know to the state of California to cause cancer or birth defects or other reproductive harm. For more information about Proposition 65 please Click Here. |
| Configuration | Upflow/Horizontal |
| Style | A-Coil |
| Airflow Direction | Upflow/Horizontal |
| Exhaust Flue Requirement | Plastic / PVC |
| Furnace Efficiency / AFUE | 96% |
| Blower Motor | Multi Speed |
| Maximum CFM | 1200 |
| Flue Location | Right |
| Burner Stages | Single |
| Fuel Type | Gas |
| Suction Line Insulation Thickness | 3/4" |
| Length | 50 feet |
Frequently Asked Questions
Affiliate disclosure: IndustrialRank earns a commission on qualifying purchases at no extra cost to you. We only recommend products we have independently reviewed.