Review
The Goodman 2.5-ton upflow system combines a high-efficiency gas furnace with matching air conditioning in a compact A-coil format. Rated at 60,000 BTU heating and 30,000 BTU cooling, this unit targets the middle of the residential HVAC market where reliability and reasonable efficiency matter more than cutting-edge technology. ACiQ manufactures this unit, which carries Goodman's reputation for straightforward, serviceable equipment. Energy Star certification confirms it meets EPA standards, and the online-registered 10-year warranty provides solid consumer protection.
The 96% AFUE furnace rating ranks among the highest available for standard gas units, translating to measurably lower heating bills. The 13 SEER1 cooling efficiency is respectable for a single-stage compressor design, particularly with R454B refrigerant that balances performance and environmental compliance. Variable-speed ECM blower technology automatically adjusts airflow to match heating and cooling loads, improving comfort during partial-load operation. The two-stage burner modulates heat output, preventing overshooting and reducing temperature swings. Maximum CFM of 1,200 suits the 2.5-ton capacity appropriately.
Pros & Cons
Pros
- 96% AFUE furnace efficiency reduces heating costs significantly compared to 80-90% baseline models
- 13 SEER cooling rating paired with R454B refrigerant meets modern environmental standards
- Variable-speed ECM blower motor adjusts to actual heating/cooling demand, improving comfort and lowering utility bills
- Two-stage burner provides modulating heat output for better temperature consistency
- Energy Star certified with 10-year warranty when registered online
Cons
- Single-stage compressor limits cooling efficiency compared to two-stage or variable-capacity alternatives
- 73 dB noise level is audible during operation, potentially noticeable in quiet residential settings
- Requires 115V single-phase electrical service with 16.7-25 amp breaker, limiting placement options in some homes
Who Should Buy
Best For
Contractors and homeowners upgrading from older split systems or looking for efficient all-in-one heating and cooling in homes with upflow configurations. This system works well for houses in regions with moderate heating and cooling seasons where balanced performance matters more than extreme capacity.
Consider Alternatives If
Anyone needing premium quiet operation, homes requiring downflow-only configurations, or buyers prioritizing maximum cooling efficiency in hot climates should explore two-stage compressor units instead.
Installation
Installation requires upflow or horizontal airflow configuration with plastic or PVC exhaust flue, typical for modern homes. Line sets include 50 feet of pre-insulated suction line with 3/4-inch insulation thickness. The 120-pound weight and compact 22-inch height, 17.5-inch width, 21-inch depth dimensions fit standard basement or closet installations. Most contractors complete installation in one day, though ductwork modifications may add time and cost depending on existing system configuration.
Warranty & Reliability
The 10-year parts and compressor warranty requires free online registration to activate. This covers manufacturing defects and component failures, though normal wear items like capacitors may have different coverage periods. The evaporator coil carries separate Goodman coverage. Registration is straightforward but essential, so many contractors handle it at installation. Warranty is non-transferable in most cases, affecting resale value.
Specifications
| SKU | ACIQ-30-EHPD-UPG |
| Brand/Manufacturer | ACiQ |
| Cooling BTU | 30,000 |
| Heating BTU | 60,000 |
| Refrigerant | R454B |
| Electrical | 115 V. 1 Phase 60 Hz |
| Warranty | 10 Years with Online Registration |
| Decibel Level (dBA) | 73 |
| Weight (in lbs) | 120.000000 |
| Feature | Spec |
| Energy Star | Yes |
| SEER1 (Efficiency) | 13 |
| Condenser Stages | Single Stage |
| Compressor Type | Reciprocating |
| Liquid Line | 3/8" |
| Suction Line | 3/4" |
| Liquid Valve Size | 3/8" |
| Max Breaker Size | 25 amps |
| Min. Breaker Size | 16.7 amps |
| Tonnage | 2.5 Ton |
| Valve Type | Sweat |
| Height | 22" |
| Width | 17.5" |
| Depth | 21" |
| Resources | CAPT Installation Manual CAPT Specifications Sheet Goodman Evaporator Coil Warranty You will need Adobe® Acrobat® Reader to view PDF documents. |
| Safety Information | PROPOSITION 65 WARNING This product and many products on our site may contain a chemical know to the state of California to cause cancer or birth defects or other reproductive harm. For more information about Proposition 65 please Click Here. |
| AHRI Certificate Number | 7368833 |
| Airflow Direction | Upflow/Horizontal |
| Exhaust Flue Requirement | Plastic / PVC |
| Product Features | Rebate Available |
| Furnace Efficiency / AFUE | 96% |
| Blower Motor | Variable Speed - ECM |
| Maximum CFM | 1200 |
| Configuration | Upflow / Downflow |
| Burner Stages | Two |
| Fuel Type | Propane, Natural Gas |
| Style | A-Coil |
| Suction Line Insulation Thickness | 3/4" |
| Length | 50 feet |
Frequently Asked Questions
Affiliate disclosure: IndustrialRank earns a commission on qualifying purchases at no extra cost to you. We only recommend products we have independently reviewed.