Review
The Goodman 2.5-ton upflow combo system sits squarely in the value segment, offering both heating and cooling in one unit at an attractive price point. This isn't a premium installation, but it competes well against aging split systems still running on R22 refrigerant. The upflow A-coil configuration suits most residential applications, and the 60,000 BTU furnace handles typical single-family homes effectively. At $643, you're buying honest equipment from an established manufacturer, not cutting corners with unknown brands.
Performance specs show a 96% AFUE furnace that converts nearly all fuel to usable heat, pairing with a 13 SEER air conditioner rated for 30,000 BTU cooling capacity. The variable-speed ECM blower motor (1,200 CFM maximum) adjusts to match heating and cooling demand, which is smarter than fixed-speed alternatives. The two-stage burner prevents constant on-off cycling during mild weather, extending equipment life. Energy Star certification confirms both components meet EPA efficiency thresholds, translating to lower utility bills than pre-2010 equipment.
Pros & Cons
Pros
- 96% AFUE furnace efficiency reduces heating costs significantly compared to older 80% systems
- 13 SEER air conditioner meets modern efficiency standards without ultra-premium pricing
- Variable-speed ECM blower motor adjusts airflow intelligently, saving electricity
- Two-stage burner provides better comfort and part-load efficiency in heating season
- Energy Star certified for both heating and cooling performance
- 10-year warranty with online registration offers solid protection
- R454B refrigerant is modern and environmentally compliant
Cons
- Single-stage compressor means cooling cycles full-blast rather than modulating, reducing efficiency potential
- 73 dB noise level is acceptable but noticeably louder than high-efficiency variable-capacity units
- 3-ton cooling capacity doesn't match the 2.5-ton rating, requiring careful right-sizing verification
- No smart thermostat integration or advanced controls mentioned in documentation
Who Should Buy
Best For
Homeowners in moderate climates (not extreme heat/cold regions) replacing 15+ year old furnace-AC combos and prioritizing upfront affordability. Contractors installing budget-conscious residential replacements in areas where efficiency rebates apply will find good value here.
Consider Alternatives If
Anyone in extreme climates, homes with poor insulation, or buyers who can stretch budget for variable-capacity compressors should look at higher SEER options for better long-term savings.
Installation
Installation requires PVC plastic exhaust venting, standard for modern high-efficiency furnaces. The system needs 115V single-phase power with 16.7 to 25-amp breaker capacity, typical for most homes. Suction and liquid line sizes (3/4 inch and 3/8 inch respectively) are standard, simplifying refrigerant line runs. Upflow/downflow configuration offers flexible placement in basements or utility closets. Professional installation strongly recommended for ductwork sealing and thermostat integration.
Warranty & Reliability
Goodman provides 10-year warranty coverage on parts when you register online, a straightforward process protecting against defects. This extends beyond minimum year-one coverage, giving peace of mind on compressor and heat exchanger failures. Coil warranty follows manufacturer guidelines separately. Registration is essential, so save documentation immediately after installation.
Specifications
| SKU | ACIQ-30-EHPD-UPG |
| Brand/Manufacturer | ACiQ |
| Cooling BTU | 30,000 |
| Heating BTU | 60,000 |
| Refrigerant | R454B |
| Electrical | 115 V. 1 Phase 60 Hz |
| Warranty | 10 Years with Online Registration |
| Decibel Level (dBA) | 73 |
| Weight (in lbs) | 120.000000 |
| Feature | Spec |
| Energy Star | Yes |
| SEER1 (Efficiency) | 13 |
| Condenser Stages | Single Stage |
| Compressor Type | Reciprocating |
| Liquid Line | 3/8" |
| Suction Line | 3/4" |
| Liquid Valve Size | 3/8" |
| Max Breaker Size | 25 amps |
| Min. Breaker Size | 16.7 amps |
| Tonnage | 3 Ton |
| Valve Type | Sweat |
| Height | 30" |
| Width | 17.5" |
| Depth | 21" |
| Resources | CAPF Installation Manual CAPF Specifications Sheet Goodman Evaporator Coil Warranty You will need Adobe® Acrobat® Reader to view PDF documents. |
| Safety Information | PROPOSITION 65 WARNING This product and many products on our site may contain a chemical know to the state of California to cause cancer or birth defects or other reproductive harm. For more information about Proposition 65 please Click Here. |
| AHRI Certificate Number | 7368833 |
| Airflow Direction | Upflow/Horizontal |
| Exhaust Flue Requirement | Plastic / PVC |
| Product Features | Rebate Available |
| Furnace Efficiency / AFUE | 96% |
| Blower Motor | Variable Speed - ECM |
| Maximum CFM | 1200 |
| Configuration | Upflow / Downflow |
| Burner Stages | Two |
| Fuel Type | Propane, Natural Gas |
| Style | A-Coil |
| Suction Line Insulation Thickness | 3/4" |
| Length | 50 feet |
Frequently Asked Questions
Affiliate disclosure: IndustrialRank earns a commission on qualifying purchases at no extra cost to you. We only recommend products we have independently reviewed.