Review
The Goodman ACIQ 2.5 ton combo system arrives as a solid mid-market offering for contractors and homeowners balancing budget with efficiency. At $643, this unit bundles an 80,000 BTU furnace with a 30,000 BTU (2.5 ton equivalent) air conditioner into one upflow package. The combination targets renovation projects and new construction where both heating and cooling matter, though the spec sheet reveals some nuances worth examining before ordering.
Performance specs show a 97% AFUE furnace paired with a 13 SEER cooling side, both hitting Energy Star thresholds. The modulating burner fires at two stages to match heating demand, while a variable-speed ECM blower reaches 1,200 CFM maximum airflow. R454B refrigerant reflects current environmental standards. However, the 3 ton cooling rating doesn't align with the 2.5 ton system designation, and single-stage compression means efficiency drops noticeably when the AC runs at partial load on mild days.
Pros & Cons
Pros
- 97% AFUE furnace efficiency translates to lower heating bills and reduced natural gas consumption
- 13 SEER rating qualifies for Energy Star certification and many utility rebates
- Modulating burner stages optimize heating efficiency across temperature ranges
- Variable-speed ECM blower motor adjusts airflow for comfort and efficiency
- 10-year warranty with online registration covers both heating and cooling components
- R454B refrigerant is lower-GWP environmental choice compared to older refrigerants
Cons
- Single-stage cooling compressor limits efficiency during partial-load conditions
- 73 dB noise level is slightly louder than multi-stage competitors during full operation
- 3 ton cooling capacity creates tonnage mismatch with 2.5 ton marketing, potentially causing short-cycling
Who Should Buy
Best For
Contractors building spec homes or replacing older systems for cost-conscious homeowners will appreciate the balance of efficiency and affordability. Homeowners in zones where heating dominates cooling loads benefit most from the high-efficiency furnace component.
Consider Alternatives If
Buyers in hot climates relying primarily on air conditioning should explore multi-stage or variable-capacity compressors, which deliver better part-load cooling efficiency than this single-stage design.
Installation
Installation requires 115V single-phase 60Hz power with 16.7 to 25-amp breaker sizing. The upflow A-coil configuration fits standard furnace closets or utility spaces. Suction line insulation (3/4 inch) prevents sweating on the 3/4 inch line, while the 3/8 inch liquid line uses sweat connections. PVC exhaust flue piping is mandatory. Most competent HVAC technicians complete installation in one day, though ductwork sizing to handle 1,200 CFM airflow matters for performance.
Warranty & Reliability
ACiQ backs this system with a 10-year parts warranty when you register online, a reasonable duration for combo units in this price range. Coverage includes the compressor, furnace heat exchanger, and controls. Registration is straightforward and extends coverage beyond baseline warranties. However, review exclusions for maintenance-related failures, which typically require proof of annual service.
Specifications
| SKU | ACIQ-30-EHPD-UPG |
| Brand/Manufacturer | ACiQ |
| Cooling BTU | 30,000 |
| Heating BTU | 80,000 |
| Refrigerant | R454B |
| Electrical | 115 V. 1 Phase 60 Hz |
| Warranty | 10 Years with Online Registration |
| Decibel Level (dBA) | 73 |
| Weight (in lbs) | 120.000000 |
| Feature | Spec |
| Energy Star | Yes |
| SEER1 (Efficiency) | 13 |
| Condenser Stages | Single Stage |
| Compressor Type | Reciprocating |
| Liquid Line | 3/8" |
| Suction Line | 3/4" |
| Liquid Valve Size | 3/8" |
| Max Breaker Size | 25 amps |
| Min. Breaker Size | 16.7 amps |
| Tonnage | 3 Ton |
| Valve Type | Sweat |
| Height | 30" |
| Width | 17.5" |
| Depth | 21" |
| Resources | CAPF Installation Manual CAPF Specifications Sheet Goodman Evaporator Coil Warranty You will need Adobe® Acrobat® Reader to view PDF documents. |
| Safety Information | PROPOSITION 65 WARNING This product and many products on our site may contain a chemical know to the state of California to cause cancer or birth defects or other reproductive harm. For more information about Proposition 65 please Click Here. |
| AHRI Certificate Number | 7424265 |
| Airflow Direction | Upflow/Horizontal |
| Exhaust Flue Requirement | Plastic / PVC |
| Product Features | Rebate Available |
| Furnace Efficiency / AFUE | 97% |
| Blower Motor | Variable Speed - ECM |
| Maximum CFM | 1200 |
| Configuration | Upflow / Downflow |
| Burner Stages | Modulating |
| Fuel Type | Propane, Natural Gas |
| Style | A-Coil |
| Suction Line Insulation Thickness | 3/4" |
| Length | 50 feet |
Frequently Asked Questions
Affiliate disclosure: IndustrialRank earns a commission on qualifying purchases at no extra cost to you. We only recommend products we have independently reviewed.