Review
The ACiQ 2.5-ton vertical A-coil represents a practical middle ground in the HVAC replacement market. Built for Goodman system compatibility, this cased evaporator coil delivers 30,000 BTU cooling capacity in a compact 17.5-inch width that fits standard air handler cabinets. The unit uses R454B refrigerant, the EPA-approved replacement for legacy R410A systems, positioning it well for long-term reliability and regulatory compliance.
Efficiency comes in at 13 SEER, a solid baseline that meets current minimum standards without premium costs. The reciprocating compressor operates on 208/230V single-phase power at 73 dB, which is acceptable for utility closets but noticeable in finished basements. Liquid and suction lines measure 3/8-inch and 3/4-inch respectively, with matching valve sizing for straightforward installation. The unit weighs 120 pounds and ships with 50 feet of suction line insulation pre-installed.
Pros & Cons
Pros
- 13 SEER efficiency balances cost and performance for moderate climates
- R454B refrigerant is EPA-approved and aligns with industry transition away from R410A
- Compact 17.5-inch width fits most standard air handler cabinets
- 10-year warranty with online registration covers major component failures
- 30,000 BTU capacity matches common 2.5-ton condenser units perfectly
Cons
- 73 dB operating noise is moderately loud for residential installations
- Single-stage compressor means less efficient part-load operation in variable weather
- Not Energy Star certified, missing qualification for some rebate programs
- Requires 208/230V single-phase power, limiting some older home installations
Who Should Buy
Best For
Contractors replacing coils on existing Goodman systems will appreciate the direct compatibility and straightforward specs. Budget-conscious homeowners in moderate climates who want reliable performance without premium pricing will find good value here.
Consider Alternatives If
Anyone needing Energy Star certification for rebate eligibility or seeking the quietest operation should look at higher-end alternatives with variable-speed compressors.
Installation
Installation is straightforward for technicians familiar with Goodman systems. The 22-inch height, 17.5-inch width, and 21-inch depth fit standard vertical air handler slots. Sweat-type valve connections require basic torch work. Electrical setup demands 16.7 to 25-amp breaker sizing depending on your panel configuration. The pre-insulated suction line reduces field labor, though custom ductwork may be needed for specific installations.
Warranty & Reliability
ACiQ backs this coil with a 10-year parts and labor warranty when you register online after purchase. This covers refrigerant charge and compressor failures, though labor is limited to approved dealers. Registration is essential, as unregistered units typically fall to shorter coverage periods. For residential use, this warranty provides reasonable peace of mind.
Specifications
| SKU | ACIQ-30-EHPD-UPG |
| Brand/Manufacturer | ACiQ |
| Cooling BTU | 30,000 |
| Refrigerant | R454B |
| Electrical | 208 / 230 V. 1 Phase 60 Hz |
| Warranty | 10 Years with Online Registration |
| Decibel Level (dBA) | 73 |
| Weight (in lbs) | 120.000000 |
| Feature | Spec |
| Energy Star | No |
| SEER1 (Efficiency) | 13 |
| Condenser Stages | Single Stage |
| Compressor Type | Reciprocating |
| Liquid Line | 3/8" |
| Suction Line | 3/4" |
| Liquid Valve Size | 3/8" |
| Max Breaker Size | 25 amps |
| Min. Breaker Size | 16.7 amps |
| Tonnage | 2.5 Ton |
| Valve Type | Sweat |
| Height | 22" |
| Width | 17.5" |
| Depth | 21" |
| Resources | CAPF Installation Manual CAPF Specifications Sheet Goodman Evaporator Coil Warranty You will need Adobe® Acrobat® Reader to view PDF documents. |
| Safety Information | PROPOSITION 65 WARNING This product and many products on our site may contain a chemical know to the state of California to cause cancer or birth defects or other reproductive harm. For more information about Proposition 65 please Click Here. |
| Configuration | Upflow / Downflow |
| Style | A-Coil |
| Suction Line Insulation Thickness | 3/4" |
| Length | 50 feet |
Frequently Asked Questions
Affiliate disclosure: IndustrialRank earns a commission on qualifying purchases at no extra cost to you. We only recommend products we have independently reviewed.