Review
The Goodman 2.5-ton system strikes an uncommon balance in today's market, offering both a gas furnace and air conditioner at a price point that makes contractors and budget-conscious homeowners take notice. This upflow configuration with A-coil design fits standard closet installations common in residential retrofits. The 80,000 BTU furnace pairs with a 30,000 BTU condenser to create a complete heating and cooling solution without requiring separate component sourcing.
Performance metrics tell a practical story here. The condenser delivers 14.5 SEER1 efficiency from a rotary compressor operating on R410A or R22 refrigerant, which translates to reasonable cooling costs without cutting-edge performance. The furnace's 80% AFUE rating and two-stage burner design provide flexible heating with a high-efficiency multi-speed blower pushing up to 2,000 CFM. Electrical requirements are modest, needing just 120V single-phase 60 Hz service with a 17.1 to 25 amp breaker.
Pros & Cons
Pros
- Exceptional price at $89 for a complete 2.5-ton system with furnace and condenser
- 14.5 SEER1 cooling efficiency is solid for single-stage units, delivering reasonable operating costs
- 80,000 BTU two-stage gas furnace provides adequate heating with 80% AFUE
- High-efficiency multi-speed blower motor improves comfort and reduces energy waste
- 10-year warranty with online registration covers parts and defects
Cons
- Single-stage condenser lacks variable-speed capability, limiting efficiency in partial-load conditions
- 72 dB noise level is audible during operation, particularly noticeable in quiet spaces
- 80% AFUE furnace efficiency is baseline, not the 90%+ achievable with high-efficiency models
Who Should Buy
Best For
Contractors and homeowners replacing failed systems in moderate climates who need to keep capital costs down without sacrificing basic performance. This unit works well in regions with moderate cooling and heating demands where premium efficiency doesn't justify the price premium.
Consider Alternatives If
Anyone in extreme climates, homeowners seeking ENERGY STAR certification, or those prioritizing whisper-quiet operation should look at two-stage or variable-capacity alternatives.
Installation
Installation requires metal exhaust flue for the furnace and standard refrigerant linework with provided 3/8-inch liquid and 3/4-inch suction lines. The 3/4-inch suction line insulation prevents condensation and efficiency loss. Upflow/downflow configuration flexibility allows placement in basements, crawlspaces, or closets. Dimensions of 26 inches tall by 21 inches wide by 21 inches deep fit most standard equipment spaces with minimal ductwork modifications.
Warranty & Reliability
A 10-year parts warranty applies when you register the unit online after installation. This covers the compressor, condenser coil, furnace heat exchanger, and blower motor against manufacturing defects. The Goodman evaporator coil carries separate warranty protection. Online registration is straightforward and adds meaningful protection for systems that typically last 15 to 20 years.
Specifications
| SKU | LS38343850 |
| Brand/Manufacturer | Online Supply |
| Cooling BTU | 30,000 |
| Heating BTU | 80,000 |
| Refrigerant | R410A or R22 |
| Electrical | 120 V. 1 Phase 60 Hz |
| Warranty | 10 Years with Online Registration |
| Decibel Level (dBA) | 72 |
| Weight (in lbs) | 22.000000 |
| Feature | Spec |
| Energy Star | No |
| SEER1 (Efficiency) | 14 |
| Condenser Stages | Single Stage |
| Compressor Type | Rotary |
| Liquid Valve Size | 3/8" |
| Suction Valve Size | 3/4" |
| Max Breaker Size | 25 amps |
| Min. Breaker Size | 17.1 amps |
| Tonnage | 3.5 Ton |
| Height | 26" |
| Width | 21" |
| Depth | 21" |
| Resources | CAPF Installation Manual CAPF Specifications Sheet Goodman Evaporator Coil Warranty You will need Adobe® Acrobat® Reader to view PDF documents. |
| Safety Information | PROPOSITION 65 WARNING This product and many products on our site may contain a chemical know to the state of California to cause cancer or birth defects or other reproductive harm. For more information about Proposition 65 please Click Here. |
| Airflow Direction | Upflow/Horizontal |
| Exhaust Flue Requirement | Metal |
| Furnace Efficiency / AFUE | 80% |
| Blower Motor | High Efficiency Multi-Speed |
| Maximum CFM | 2000 |
| Configuration | Upflow / Downflow |
| Burner Stages | Two |
| Fuel Type | Gas |
| Liquid Line | 3/8" |
| Suction Line | 3/4" |
| Style | A-Coil |
| Suction Line Insulation Thickness | 3/4" |
| Length | 50 feet |
Frequently Asked Questions
Affiliate disclosure: IndustrialRank earns a commission on qualifying purchases at no extra cost to you. We only recommend products we have independently reviewed.