Review
The ACiQ 2.5-ton system represents solid middle-ground HVAC equipment for residential applications. Positioned below premium variable-speed units but above budget bare-minimum options, this unit delivers real efficiency gains over aging 10-year-old systems. The combination of 14 SEER cooling and 92% AFUE heating gives homeowners measurable year-round performance improvements. At this price point, you're getting certified ENERGY STAR equipment that qualifies for many regional rebates, making the actual out-of-pocket cost even lower.
Performance metrics tell the practical story here. The 30,000 BTU cooling and heating capacities exactly match the 2.5-ton rating, with a 2,000 CFM maximum airflow that works within standard ductwork. The single-stage scroll compressor efficiently handles typical operating conditions, though it lacks the part-load advantages of two-stage designs. The multi-speed blower motor is the standout feature, allowing the system to modulate between low and high speeds rather than cycling on and off constantly. This translates to lower electric consumption and quieter operation during mild weather.
Pros & Cons
Pros
- 14 SEER rating qualifies for ENERGY STAR certification and common utility rebates
- 92% AFUE furnace efficiency minimizes heating costs compared to older 80% units
- 30,000 BTU heating and cooling capacity suits 2.5-ton applications well
- Multi-speed blower motor enables better comfort and quieter operation than single-speed
- A-coil design with 3/8-inch liquid line and 3/4-inch suction line simplifies retrofit installations
Cons
- Single-stage compressor and burner limit part-load efficiency compared to two-stage alternatives
- 74 dB noise level is noticeably louder than variable-speed systems in same class
- R454B refrigerant carries higher GWP than emerging low-GWP alternatives
Who Should Buy
Best For
Contractors upgrading residential systems in moderate climates and homeowners prioritizing upfront cost savings over maximum efficiency. This system works well for homes under 2,000 square feet where 2.5-ton capacity and 14 SEER delivery solid everyday performance.
Consider Alternatives If
Buyers in extremely hot climates needing maximal cooling efficiency, or those in ultra-cold regions where higher AFUE ratings justify premium pricing should evaluate higher-tier options.
Installation
Installation requires standard 208/230V single-phase 60Hz power with a 30-amp circuit breaker maximum. The upflow/horizontal A-coil configuration fits most attic spaces and closets with its 38.25-inch height and 29-inch width and depth. PVC flue venting (right-mounted) integrates easily into modern homes. The 50-foot suction line with 3/4-inch insulation and 3/8-inch liquid line follow industry standards, meaning most technicians can complete installation in half a day.
Warranty & Reliability
ACiQ backs this system with a 10-year warranty when registered online after installation. This covers parts and labor, which is competitive for equipment at this price. The 10-year term provides reasonable protection against compressor failure, heat exchanger cracks, or component defects. Online registration is straightforward and takes five minutes, so plan to complete it immediately after your technician finishes startup.
Specifications
| SKU | ACIQ-30-EHPD-UPG |
| Brand/Manufacturer | ACiQ |
| Cooling BTU | 30,000 |
| Heating BTU | 30,000 |
| Refrigerant | R454B |
| Electrical | 208 / 230 V. 1 Phase 60 Hz |
| Warranty | 10 Years with Online Registration |
| Decibel Level (dBA) | 74 |
| Weight (in lbs) | 120.000000 |
| Feature | Spec |
| Configuration | Upflow/Horizontal |
| Liquid Line | 3/8" |
| Suction Line | 3/4" |
| Tonnage | 2.5 Ton |
| Style | A-Coil |
| Height | 38.25" |
| Width | 29" |
| Depth | 29" |
| Resources | Goodman Specifications Goodman Customer Brochure Goodman Installation Instructions Goodman Kit Instructions Goodman Parts Manual Goodman Service Manual Goodman Warranty You will need Adobe® Acrobat® Reader to view PDF documents. |
| Safety Information | PROPOSITION 65 WARNING This product and many products on our site may contain a chemical know to the state of California to cause cancer or birth defects or other reproductive harm. For more information about Proposition 65 please Click Here. |
| Airflow Direction | Upflow/Horizontal |
| Exhaust Flue Requirement | Plastic / PVC |
| Furnace Efficiency / AFUE | 92% |
| Blower Motor | Multi Speed |
| Maximum CFM | 2000 |
| Flue Location | Right |
| Burner Stages | Single |
| Fuel Type | Gas |
| Replaces | GSZ140311 |
| Product Features | Rebate Available |
| Energy Star | Yes |
| SEER1 (Efficiency) | 14 |
| Condenser Stages | Single Stage |
| Compressor Type | Scroll |
| Liquid Valve Size | 3/8" |
| Suction Valve Size | 3/4" |
| Max Breaker Size | 30 amps |
| Min. Breaker Size | 18.7 amps |
| Valve Type | Sweat |
| Suction Line Insulation Thickness | 3/4" |
| Length | 50 feet |
Frequently Asked Questions
Affiliate disclosure: IndustrialRank earns a commission on qualifying purchases at no extra cost to you. We only recommend products we have independently reviewed.