Review
The Goodman 2.5 ton gas furnace and air conditioner system represents the budget tier of residential HVAC equipment. Priced at just $89, this horizontal configuration targets contractors working on cost-sensitive replacements and homeowners upgrading from decades-old systems. While it lacks premium features found in variable-capacity models, it delivers functional heating and cooling without brand markup or unnecessary bells.
Heating produces 100,000 BTU output with 92% AFUE efficiency, a respectable standard that beats pre-2000 equipment significantly. Cooling delivers 30,000 BTU at 14 SEER rating across a single stage, adequate for moderate climates. The multi-speed blower adjusts CFM up to 2000, managing temperature swings better than fixed-speed designs. At 72 dBA, noise levels run slightly elevated compared to newer models but acceptable for equipment rooms and attics.
Pros & Cons
Pros
- 92% AFUE furnace efficiency exceeds federal minimum standards, reducing heating costs meaningfully
- 14 SEER cooling efficiency offers solid performance for retrofit installations
- Multi-speed blower motor adjusts to actual heating and cooling demand, improving comfort
- Horizontal configuration fits tight attic and crawlspace applications efficiently
- PVC plastic venting simplifies installation compared to traditional metal flue systems
- 10-year warranty with online registration covers manufacturing defects adequately
Cons
- Single-stage burner and compressor lack modulation, causing on-off cycling that wastes energy
- 72 dBA noise level is louder than modern variable-capacity systems, notable in quiet homes
- 3.5 ton cooling capacity exceeds 2.5 ton heating capacity, creating sizing mismatch for balanced operation
- Not Energy Star certified, missing rebate eligibility in some utility programs
- R22 refrigerant option adds future phaseout concerns and rising service costs
- Limited documentation available, requiring manual downloads for installation details
Who Should Buy
Best For
Contractors performing budget replacements in small residential spaces and homeowners upgrading 1980s-1990s equipment who prioritize low upfront cost over advanced features. This works well for secondary homes or mild climates where single-stage operation won't strain performance.
Consider Alternatives If
Homeowners in cold climates needing maximum efficiency, anyone requiring quiet operation in open floor plans, or buyers seeking Energy Star certification for utility rebates and future-proof refrigerant technology.
Installation
The horizontal A-coil design fits tight spaces where upflow isn't possible. PVC plastic venting simplifies flue installation versus metal ductwork, though contractors must verify local codes. At 21 by 21 by 26 inches, sizing constraints apply to existing platforms. The 208/230V single-phase requirement works with standard residential electrical service and 17.1 to 25 amp breaker sizing. Professional installation remains essential for proper refrigerant charge and ductwork connections.
Warranty & Reliability
A 10-year parts warranty covers manufacturing defects when registered online with the manufacturer. This protects against compressor and heat exchanger failures during the critical first decade. The warranty does not cover labor, refrigerant, or user damage. Online registration is straightforward and recommended immediately after installation to activate full coverage.
Specifications
| SKU | LS38343850 |
| Brand/Manufacturer | Online Supply |
| Cooling BTU | 30,000 |
| Heating BTU | 100,000 |
| Refrigerant | R410A or R22 |
| Electrical | 208 / 230 V. 1 Phase 60 Hz |
| Warranty | 10 Years with Online Registration |
| Decibel Level (dBA) | 72 |
| Weight (in lbs) | 22.000000 |
| Feature | Spec |
| Airflow Direction | Upflow/Horizontal |
| Exhaust Flue Requirement | Plastic / PVC |
| Furnace Efficiency / AFUE | 92% |
| Blower Motor | Multi Speed |
| Maximum CFM | 2000 |
| Configuration | Horizontal |
| Flue Location | Right |
| Burner Stages | Single |
| Fuel Type | Gas |
| Height | 21" |
| Width | 21.125" |
| Depth | 26" |
| Resources | CHPF Installation Manual CHPF Specifications Sheet Goodman Evaporator Coil Warranty You will need Adobe® Acrobat® Reader to view PDF documents. |
| Safety Information | PROPOSITION 65 WARNING This product and many products on our site may contain a chemical know to the state of California to cause cancer or birth defects or other reproductive harm. For more information about Proposition 65 please Click Here. |
| Energy Star | No |
| SEER1 (Efficiency) | 14 |
| Condenser Stages | Single Stage |
| Compressor Type | Rotary |
| Liquid Valve Size | 3/8" |
| Suction Valve Size | 3/4" |
| Max Breaker Size | 25 amps |
| Min. Breaker Size | 17.1 amps |
| Tonnage | 3.5 Ton |
| Liquid Line | 3/8" |
| Suction Line | 3/4" |
| Style | A-Coil |
| Suction Line Insulation Thickness | 3/4" |
| Length | 50 feet |
Frequently Asked Questions
Affiliate disclosure: IndustrialRank earns a commission on qualifying purchases at no extra cost to you. We only recommend products we have independently reviewed.