Review
Goodman's 2.5-ton system pairs a 40,000 BTU furnace with a 30,000 BTU air conditioner in a compact upflow configuration. This mid-capacity combo strikes a practical balance for homes between 1,500 and 2,500 square feet. The 96% AFUE rating and 13 SEER efficiency place it solidly in the high-efficiency category without venturing into premium pricing territory. Online Supply positions this as a dependable workhorse for contractors and homeowners prioritizing steady performance over cutting-edge technology.
The furnace delivers 40,000 BTU with a two-stage burner and multi-speed ECM blower, allowing it to modulate output based on demand. The air conditioner's 30,000 BTU capacity with single-stage reciprocating compressor handles 2.5 tons of cooling. At 13 SEER, this unit qualifies as ENERGY STAR certified. The combination achieves 96% AFUE heating efficiency, translating to measurable savings on winter gas bills. Operating at 73 dB, it's moderately loud but typical for this equipment class. The 115V, single-phase electrical requirement keeps installation straightforward on standard residential circuits.
Pros & Cons
Pros
- 96% AFUE furnace efficiency reduces heating costs significantly compared to 80-90% models
- Two-stage burner and multi-speed ECM blower deliver consistent comfort without energy waste
- 13 SEER cooling efficiency qualifies as ENERGY STAR, lowering annual AC costs
- Compact A-coil design fits tight upflow installations with 22-inch height and 17.5-inch width
- PVC flue compatibility simplifies venting on retrofit projects without masonry chimneys
Cons
- Single-stage compressor limits efficiency gains compared to dual-stage designs in variable-load scenarios
- 73 dB noise level is moderately loud for outdoor operation near living spaces
- R410A/R22 refrigerant compatibility adds service complexity if mixing refrigerants becomes necessary
Who Should Buy
Best For
Homeowners in transitional climates (not extreme heat or cold) with 2.5-ton cooling needs and tight equipment spaces. Contractors valuing straightforward installation and reliable mid-tier performance on budget-conscious residential projects.
Consider Alternatives If
Those seeking highest-tier efficiency (15+ SEER, 98%+ AFUE), homes requiring variable-capacity compressors for precise humidity control, or installations where noise below 70 dB is critical.
Installation
Installation is contractor-friendly with standard sweat-type valve connections using 3/8-inch liquid and 3/4-inch suction lines. The 50-foot pre-insulated suction line reduces on-site fabrication. PVC flue compatibility eliminates expensive chimney modifications. The compact 22-inch height works in tight attics and basements. A 16.7 to 25-amp breaker accommodates most existing panels. This upflow/horizontal flexibility suits varied installation scenarios.
Warranty & Reliability
The 10-year parts warranty requires online registration after purchase. This covers compressor, heat exchanger, and coil defects. Registration is straightforward but mandatory, so buyers must complete it promptly. The A-coil evaporator carries separate Goodman coverage. This warranty period is standard for mid-tier residential equipment and provides solid protection against premature failure.
Specifications
| SKU | LS38343850 |
| Brand/Manufacturer | Online Supply |
| Cooling BTU | 30,000 |
| Heating BTU | 40,000 |
| Refrigerant | R410A or R22 |
| Electrical | 115 V. 1 Phase 60 Hz |
| Warranty | 10 Years with Online Registration |
| Decibel Level (dBA) | 73 |
| Weight (in lbs) | 22.000000 |
| Feature | Spec |
| Energy Star | Yes |
| SEER1 (Efficiency) | 13 |
| Condenser Stages | Single Stage |
| Compressor Type | Reciprocating |
| Liquid Line | 3/8" |
| Suction Line | 3/4" |
| Liquid Valve Size | 3/8" |
| Max Breaker Size | 25 amps |
| Min. Breaker Size | 16.7 amps |
| Tonnage | 2.5 Ton |
| Valve Type | Sweat |
| Height | 22" |
| Width | 17.5" |
| Depth | 21" |
| Resources | CAPF Installation Manual CAPF Specifications Sheet Goodman Evaporator Coil Warranty You will need Adobe® Acrobat® Reader to view PDF documents. |
| Safety Information | PROPOSITION 65 WARNING This product and many products on our site may contain a chemical know to the state of California to cause cancer or birth defects or other reproductive harm. For more information about Proposition 65 please Click Here. |
| Airflow Direction | Upflow/Horizontal |
| Exhaust Flue Requirement | Plastic / PVC |
| Furnace Efficiency / AFUE | 96% |
| Blower Motor | Multi-Speed - ECM |
| Maximum CFM | 800 |
| Configuration | Upflow / Downflow |
| Flue Location | Right |
| Burner Stages | Two |
| Fuel Type | Gas |
| Style | A-Coil |
| Suction Line Insulation Thickness | 3/4" |
| Length | 50 feet |
Frequently Asked Questions
Affiliate disclosure: IndustrialRank earns a commission on qualifying purchases at no extra cost to you. We only recommend products we have independently reviewed.