Review
The Goodman 2.5 ton split system represents a pragmatic middle ground in the residential HVAC market. This ACiQ-badged unit pairs a 40,000 BTU furnace with a 30,000 BTU air conditioner in an upflow configuration suitable for most single-family homes. With Energy Star certification and a $0 price point, it targets contractors and homeowners seeking reliable equipment without premium features or pricing. The system carries legitimate heritage, backed by comprehensive documentation and a substantial warranty structure.
Performance numbers tell a compelling story for efficiency-conscious buyers. The furnace delivers 96% AFUE, meaning nearly all fuel converts to usable heat, while the condenser achieves 13 SEER cooling efficiency. A two-stage burner modulates heating output to match actual demand, reducing fuel waste during mild weather. The variable-speed ECM blower operates at 1200 CFM maximum and adjusts automatically, preventing the energy penalty of constant high-speed operation. These specs align with current federal standards without sacrificing cost.
Pros & Cons
Pros
- 96% AFUE furnace efficiency exceeds most competitor offerings in this price range
- 13 SEER cooling efficiency qualifies for Energy Star with $0 list price indicating strong value
- Two-stage burner and variable speed ECM blower optimize comfort and reduce short cycling
- Lifetime heat exchanger warranty provides genuine long-term protection for core component
- PVC flue compatibility simplifies venting installation compared to metal duct requirements
Cons
- Single-stage compressor limits cooling efficiency during partial load conditions common in spring/fall
- 73 dB operating noise is above quieter inverter-driven competitors like Carrier or Lennox
- R454B refrigerant requires certified technicians, limiting service options in some areas
Who Should Buy
Best For
Budget-conscious homeowners in regions with moderate heating and cooling demands who value upfront affordability and straightforward service. Contractors stocking reliable mid-tier equipment for residential retrofit jobs and new builds where premium features aren't required.
Consider Alternatives If
Anyone in hot climates needing superior cooling efficiency should consider variable-capacity or inverter compressor systems that achieve 15+ SEER ratings.
Installation
Installation complexity sits at moderate difficulty. The system requires 115V single-phase power with a 16.7 to 25-amp breaker, standard in most homes. Suction and liquid line sizing measures 3/4 inch and 3/8 inch respectively, typical for this tonnage. PVC flue compatibility simplifies exhaust routing compared to rigid metal. R454B refrigerant demands EPA-certified technicians. The upflow A-coil design fits standard closet installations common in residential attics and basements.
Warranty & Reliability
Goodman provides lifetime coverage on the heat exchanger, the furnace component most likely to fail from stress or corrosion. Ten-year parts coverage applies to compressor, motor, and other components with online registration required. This structure balances consumer protection with reasonable manufacturer liability. Heat exchanger lifetime coverage is substantive and protects against the single most expensive failure mode.
Specifications
| SKU | ACIQ-30-EHPD-UPG |
| Brand/Manufacturer | ACiQ |
| Cooling BTU | 30,000 |
| Heating BTU | 40,000 |
| Refrigerant | R454B |
| Electrical | 115 V. 1 Phase 60 Hz |
| Warranty | Lifetime Heat Exchanger and 10 Years Parts with Online Registration |
| Decibel Level (dBA) | 73 |
| Weight (in lbs) | 120.000000 |
| Feature | Spec |
| Energy Star | Yes |
| SEER1 (Efficiency) | 13 |
| Condenser Stages | Single Stage |
| Compressor Type | Reciprocating |
| Liquid Line | 3/8" |
| Suction Line | 3/4" |
| Liquid Valve Size | 3/8" |
| Max Breaker Size | 25 amps |
| Min. Breaker Size | 16.7 amps |
| Tonnage | 2.5 Ton |
| Valve Type | Sweat |
| Height | 34.5" |
| Width | 17.5" |
| Depth | 28.75" |
| Resources | Goodman Brochure Goodman Install Instructions Goodman Parts Manual Goodman Service Manual Goodman Specifications Goodman Technical Information Goodman User Information Goodman Warranty You will need Adobe® Acrobat® Reader to view PDF documents. |
| Safety Information | PROPOSITION 65 WARNING This product and many products on our site may contain a chemical know to the state of California to cause cancer or birth defects or other reproductive harm. For more information about Proposition 65 please Click Here. |
| Configuration | Upflow/Horizontal |
| Style | A-Coil |
| AHRI Certificate Number | 7368841 |
| Airflow Direction | Upflow/Horizontal |
| Exhaust Flue Requirement | Plastic / PVC |
| Product Features | Rebate Available |
| Furnace Efficiency / AFUE | 96% |
| Blower Motor | Variable Speed - ECM |
| Maximum CFM | 1200 |
| Burner Stages | Two |
| Fuel Type | Propane, Natural Gas |
| Suction Line Insulation Thickness | 3/4" |
| Length | 50 feet |
Frequently Asked Questions
Affiliate disclosure: IndustrialRank earns a commission on qualifying purchases at no extra cost to you. We only recommend products we have independently reviewed.