Review
The ACiQ 2.5-ton combo system represents a practical middle ground in the HVAC market. It combines gas heating and air conditioning in one upflow-configured unit, targeting the segment of buyers who need reliable performance without luxury pricing. At $732, this system undercuts many competitors while maintaining Energy Star certification. The furnace delivers 30,000 BTU heating and the air conditioner handles 30,000 BTU cooling, making it suitable for homes in the 1,000 to 1,500 square foot range.
Performance specs tell a solid story here. The 96% AFUE rating on the gas furnace means minimal waste during heating, translating to measurable savings on winter energy bills. The 14 SEER cooling efficiency meets current federal minimums and qualifies for Energy Star rebates in many regions. The two-stage burner and multi-speed ECM blower motor add genuine value by allowing the system to modulate output. Electrically, it runs on standard 115V, 1-phase residential power with a breaker requirement of 17.1 to 25 amps.
Pros & Cons
Pros
- 96% AFUE furnace efficiency means lower heating bills, especially in cold climates
- 14 SEER rating qualifies as Energy Star certified, meeting modern standards
- Multi-speed ECM blower motor adjusts to actual heating and cooling demand, reducing runtime
- Two-stage burner allows modulated heating for better comfort and efficiency
- R454B refrigerant is newer, lower-GWP alternative to older refrigerants
Cons
- Single-stage compressor is less efficient than two-stage or variable-speed alternatives
- 72 dB noise level is moderately loud, especially during cooling cycles
- SKU confusion: specs show 2.5-ton title but 3-ton tonnage specification creates clarity issues
Who Should Buy
Best For
Homeowners replacing older systems in moderate climates and cost-conscious contractors needing equipment for new builds or upgrades. This works best in homes where upflow configuration fits existing ductwork.
Consider Alternatives If
Anyone in very hot climates seeking maximum cooling efficiency or those wanting variable-speed compressors for quieter operation and premium comfort control.
Installation
Installation requires standard split-system setup with 3/8-inch liquid line and 3/4-inch suction line running up to 50 feet. The A-coil style works with both upflow and downflow configurations. PVC flue venting is required for the gas furnace. Most experienced HVAC techs can install this in 4-6 hours. Proper refrigerant line sizing and evacuation procedures are critical to achieving rated efficiency.
Warranty & Reliability
Standard 10-year parts warranty provided by ACiQ with online registration required. This is competitive for mid-tier equipment. Coverage includes compressor and most internal components. Registration takes minutes and protects your investment throughout the warranty period. Does not cover labor, only parts replacement.
Specifications
| SKU | ACIQ-30-EHPD-UPG |
| Brand/Manufacturer | ACiQ |
| Cooling BTU | 30,000 |
| Heating BTU | 30,000 |
| Refrigerant | R454B |
| Electrical | 115 V. 1 Phase 60 Hz |
| Warranty | 10 Years with Online Registration |
| Decibel Level (dBA) | 72 |
| Weight (in lbs) | 120.000000 |
| Feature | Spec |
| Energy Star | Yes |
| SEER1 (Efficiency) | 14 |
| Condenser Stages | Single Stage |
| Compressor Type | Rotary |
| Liquid Valve Size | 3/8" |
| Suction Valve Size | 3/4" |
| Max Breaker Size | 25 amps |
| Min. Breaker Size | 17.1 amps |
| Tonnage | 3 Ton |
| Height | 30" |
| Width | 17.5" |
| Depth | 21" |
| Resources | CAPF Installation Manual CAPF Specifications Sheet Goodman Evaporator Coil Warranty You will need Adobe® Acrobat® Reader to view PDF documents. |
| Safety Information | PROPOSITION 65 WARNING This product and many products on our site may contain a chemical know to the state of California to cause cancer or birth defects or other reproductive harm. For more information about Proposition 65 please Click Here. |
| Airflow Direction | Upflow/Horizontal |
| Exhaust Flue Requirement | Plastic / PVC |
| Furnace Efficiency / AFUE | 96% |
| Blower Motor | Multi-Speed - ECM |
| Maximum CFM | 1200 |
| Configuration | Upflow / Downflow |
| Flue Location | Right |
| Burner Stages | Two |
| Fuel Type | Gas |
| Liquid Line | 3/8" |
| Suction Line | 3/4" |
| Style | A-Coil |
| Suction Line Insulation Thickness | 3/4" |
| Length | 50 feet |
Frequently Asked Questions
Affiliate disclosure: IndustrialRank earns a commission on qualifying purchases at no extra cost to you. We only recommend products we have independently reviewed.