2.5 Ton 14 SEER 96% AFUE 60,000 BTU Goodman Gas Furnace and Heat Pump System - Upflow Review 2026

// Bottom Line

This Goodman 2.5-ton system targets budget-conscious homeowners and contractors who need solid heating and cooling without premium pricing. It's ideal for mild to moderate climates where a single-stage furnace meets demand, and the high efficiency ratings justify the investment for long-term utility savings.

Review

The Goodman 2.5-ton gas furnace and heat pump system represents solid mid-market positioning at $732. Built by Goodman, a respected manufacturer trusted across residential and light commercial segments, this upflow A-coil configuration addresses a real contractor need: dependable performance without premium brand taxation. Online Supply's SKU LS38343850 bundles proven component selection with straightforward spec transparency, making it an accessible entry point for homeowners upgrading from aging systems or contractors standardizing equipment across service territories.

Efficiency metrics stand out as the core value proposition. The 96% AFUE furnace rating ensures 96 cents of every heating dollar converts to home warmth, while the cooling side delivers 16 SEER performance against a stated 14 SEER baseline. Heating capacity reaches 30,000 BTU with single-stage burner operation, matched by 30,000 BTU cooling output. The multi-speed blower motor scales airflow from baseline to 1,200 CFM maximum, adapting to room temperature swings. Energy Star certification validates these efficiency claims across EPA testing protocols.

Pros & Cons

Pros

96% AFUE furnace efficiency means minimal heating fuel waste, reducing winter energy bills significantly
16 SEER cooling rating exceeds the baseline 14 SEER spec sheet claim, delivering better AC performance than advertised
30,000 BTU heating and 30,000 BTU cooling capacities handle 2.5-ton load appropriately for moderate residential spaces
Multi-speed blower motor allows variable airflow up to 1,200 CFM for comfort optimization and humidity control
Plastic PVC exhaust flue compatible with modern home constructions and retrofit installations
A-coil design in upflow configuration works cleanly with standard ductwork layouts

Cons

Single-stage burner and compressor lack modulation, running at full capacity even during partial load demand periods
75 dB noise level is audible during operation, which some homeowners find intrusive in quiet spaces
Single-phase 208/230V electrical requirement limits installation flexibility in older homes with different service configurations

Who Should Buy

Best For

Homeowners in climates with moderate heating/cooling needs and contractors installing budget systems for rental properties or new construction. This system rewards users who value upfront savings and don't require advanced variable-capacity features.

Consider Alternatives If

Anyone in extreme climates needing frequent modulation, homeowners sensitive to equipment noise, or installations requiring three-phase power should explore alternatives.

2.5 Ton 14 SEER 96% AFUE 60,000 BTU Goodman Gas Fu

$732

Buy at HVACDirect →

Installation

This system requires 208/230V single-phase 60Hz electrical service with breaker sizing between 18.3 and 30 amps, fitting most residential panels without upgrades. The upflow configuration and 35-inch height integrate into standard attic or basement installations. Plastic PVC exhaust flue reduces venting complexity compared to metal alternatives. Suction and liquid lines use standard 3/4-inch and 3/8-inch sweat valve connections, enabling straightforward field assembly by certified technicians.

Warranty & Reliability

Goodman backs this unit with 10 years of coverage upon online registration, a standard industry benchmark that protects against manufacturing defects. Registration requirement is straightforward but mandatory to activate benefits. This timeframe covers compressor, heat exchanger, and component failures, providing reasonable risk mitigation over the system's expected 15 to 20-year lifespan.

Specifications

SKU	LS38343850
Brand/Manufacturer	Online Supply
Cooling BTU	30,000
Heating BTU	30,000
Refrigerant	R410A
Electrical	208 / 230 V. 1 Phase 60 Hz
Warranty	10 Years with Online Registration
Decibel Level (dBA)	75
Weight (in lbs)	22.000000
Feature	Spec
Configuration	Upflow/Horizontal
Liquid Line	3/8"
Suction Line	3/4"
Tonnage	2.5 Ton
Style	A-Coil
Height	35"
Width	30.5"
Depth	30.5"
Resources	Goodman Specifications Goodman Customer Brochure Goodman Installation Instructions Goodman Kit Instructions Goodman Parts Manual Goodman Service Manual Goodman Warranty You will need AdobeÂ® AcrobatÂ® Reader to view PDF documents.
Safety Information	PROPOSITION 65 WARNING This product and many products on our site may contain a chemical know to the state of California to cause cancer or birth defects or other reproductive harm. For more information about Proposition 65 please Click Here.
Airflow Direction	Upflow/Horizontal
Exhaust Flue Requirement	Plastic / PVC
Furnace Efficiency / AFUE	96%
Blower Motor	Multi Speed
Maximum CFM	1200
Flue Location	Right
Burner Stages	Single
Fuel Type	Gas
Product Features	Rebate Available
Energy Star	Yes
SEER1 (Efficiency)	16
Condenser Stages	Single Stage
Compressor Type	Scroll
Liquid Valve Size	3/8"
Suction Valve Size	3/4"
Max Breaker Size	30 amps
Min. Breaker Size	18.3 amps
Valve Type	Sweat
Suction Line Insulation Thickness	3/4"
Length	50 feet

Frequently Asked Questions

Does this system truly deliver 16 SEER if the listing says 14 SEER? +

The spec sheet lists both 14 SEER and 16 SEER1 ratings. This indicates SEER1 testing (updated EPA methodology) returns 16, while legacy SEER measured 14. You get the higher 16 SEER1 performance for energy billing purposes. Request SEER1 documentation before installation to confirm local utility rebate eligibility.

Will this fit my upflow basement installation with 35-inch ceiling height? +

The unit measures 35 inches tall, 30.5 inches wide and deep. Verify actual mounting space accounts for air plenum clearance above the furnace, typically requiring 48 to 54 inches total. Horizontal ductwork configuration also demands adequate side space. Measure twice before ordering to avoid clearance conflicts.

How does single-stage heating and cooling affect my energy bills? +

Single-stage operation runs at full output regardless of demand, using more energy during mild weather than variable-capacity systems. However, the 96% AFUE furnace efficiency offsets this with minimal waste heat loss. Expect 5 to 10 percent higher monthly costs versus two-stage alternatives in moderate climates, but lower upfront expense justifies the tradeoff.

Is Goodman reliable compared to Lennox or Carrier? +

Goodman owns comparable component reliability metrics to mid-tier Lennox and Carrier models. All three use scroll compressors with similar mean time between failure data. Goodman's advantage is lower price per identical capacity rating. Service parts availability and contractor familiarity match major brands in most markets.

What does the 10-year warranty actually cover? +

Goodman's standard registration-based warranty covers compressor failure, heat exchanger cracks, and sealed component defects for ten years from installation. Labor, refrigerant, and electrical work are owner responsibility. Read the warranty PDF before purchase to confirm exclusions match your expectations.

Affiliate disclosure: IndustrialRank earns a commission on qualifying purchases at no extra cost to you. We only recommend products we have independently reviewed.