Review
The Goodman 2.5 ton system balances heating and cooling in a single packaged unit designed for upflow installation. At $643, it positions itself as an accessible alternative to premium brands while maintaining Energy Star certification. The modulating burner and variable-speed blower distinguish this from stripped-down budget models, though the single-stage compressor confirms its mid-market positioning. Goodman's reputation for durability in the contractor community supports its viability for replacement applications.
Heating delivers 60,000 BTU with impressive 97% AFUE efficiency, meaning 97 cents of every energy dollar converts to warmth rather than exhaust. Cooling output reaches 29,000 BTU at 16 SEER1 rating, adequate for 2,000 to 2,400 square foot homes in moderate climates. The variable-speed ECM blower runs up to 1200 CFM, adjusting speed to match load and reducing the constant drone typical of fixed-speed motors. Electrical requirements are modest at 115V single phase with 17.1 to 25 amp breaker sizing, fitting most existing home panels.
Pros & Cons
Pros
- Modulating burner reduces energy waste by adjusting output based on demand, not just on/off cycling
- 97% AFUE furnace efficiency means minimal heat loss up the exhaust flue with PVC ducting option
- Variable-speed ECM blower motor adjusts airflow from 0 to 1200 CFM, improving comfort and reducing runtime costs
- 16 SEER1 cooling efficiency with 29,000 BTU capacity handles moderate climates effectively
- Energy Star rated system qualifies for rebates in many jurisdictions, offsetting initial cost
- 10-year warranty with online registration covers parts and provides peace of mind
Cons
- Single-stage compressor means cooling output doesn't modulate, reducing efficiency in mild weather compared to two-stage units
- 71.5 dB noise level is audible from adjacent rooms, noticeable during furnace operation
- 3 ton cooling capacity (29,000 BTU) limits this to smaller homes; oversizing risks short cycling and poor humidity control
Who Should Buy
Best For
Budget-conscious homeowners in moderate climates with homes under 2,500 square feet who are replacing 15+ year old equipment and can benefit from energy efficiency rebates. Contractors seeking reliable mid-range equipment for rental properties or cost-sensitive customers will find solid value here.
Consider Alternatives If
Homeowners in hot climates needing robust cooling, homes over 3,000 square feet, or buyers wanting modulating cooling compressors should look at two-stage or variable-capacity units instead.
Installation
Upflow configuration suits basements and attic placement with straightforward ductwork connections. The A-coil style requires compatible evaporator installation. Suction and liquid lines measure 7/8 inch and 3/8 inch respectively, with 3/4 inch insulation on the 50-foot suction line included. PVC exhaust flue simplifies venting versus metal alternatives. Most contractors complete installation in one day for straightforward replacements.
Warranty & Reliability
Goodman backs this unit with 10 years parts coverage upon online registration, standard for the brand. Coverage applies to compressor, blower motor, and refrigeration components. The evaporator coil carries separate coverage under Goodman's coil warranty terms. Registration is straightforward and necessary to activate full protection, so homeowners should complete it immediately after installation.
Specifications
| SKU | LS38783850 |
| Brand/Manufacturer | Online Supply |
| Cooling BTU | 29,000 |
| Heating BTU | 60,000 |
| Refrigerant | R410A or R22 |
| Electrical | 115 V. 1 Phase 60 Hz |
| Warranty | 10 Years with Online Registration |
| Decibel Level (dBA) | 71.5 |
| Weight (in lbs) | 30.000000 |
| Feature | Spec |
| Energy Star | Yes |
| SEER1 (Efficiency) | 16 |
| Condenser Stages | Single Stage |
| Compressor Type | Scroll |
| Liquid Valve Size | 3/8" |
| Suction Valve Size | 7/8" |
| Max Breaker Size | 25 amps |
| Min. Breaker Size | 17.1 amps |
| Tonnage | 3 Ton |
| Height | 30" |
| Width | 17.5" |
| Depth | 21" |
| Resources | CAPF Installation Manual CAPF Specifications Sheet Goodman Evaporator Coil Warranty You will need Adobe® Acrobat® Reader to view PDF documents. |
| Safety Information | PROPOSITION 65 WARNING This product and many products on our site may contain a chemical know to the state of California to cause cancer or birth defects or other reproductive harm. For more information about Proposition 65 please Click Here. |
| AHRI Certificate Number | 7424264 |
| Airflow Direction | Upflow/Horizontal |
| Exhaust Flue Requirement | Plastic / PVC |
| Product Features | Rebate Available |
| Furnace Efficiency / AFUE | 97% |
| Blower Motor | Variable Speed - ECM |
| Maximum CFM | 1200 |
| Configuration | Upflow / Downflow |
| Burner Stages | Modulating |
| Fuel Type | Propane, Natural Gas |
| Liquid Line | 3/8" |
| Suction Line | 7/8" |
| Style | A-Coil |
| Suction Line Insulation Thickness | 3/4" |
| Length | 50 feet |
Frequently Asked Questions
Affiliate disclosure: IndustrialRank earns a commission on qualifying purchases at no extra cost to you. We only recommend products we have independently reviewed.