Review
Goodman's horizontal gas furnace and air conditioner combo at $115 represents solid value in the budget-to-mid-range segment. This 2.5-ton system delivers 100,000 BTU of heating and 29,000 BTU of cooling in a compact horizontal footprint suited for tight mechanical spaces. Online Supply positions this as an affordable option for homeowners and contractors managing replacement projects where capital constraints matter.
The 80% AFUE rating and 16 SEER1 cooling efficiency place this unit in the middle tier, adequate for moderate climates but not cutting-edge. The variable-speed blower motor is the efficiency highlight, modulating output to avoid constant full-power cycling. Two-stage burner heating and R410A refrigerant support round out a practical spec sheet that prioritizes reliability over peak seasonal performance ratings.
Pros & Cons
Pros
- Exceptional price point at $115 for a complete 2.5-ton combo system
- Variable-speed blower motor adjusts airflow, reducing runtime and energy waste
- 16 SEER1 rating exceeds the stated 15 SEER in product title, qualifying for Energy Star
- 100,000 BTU furnace handles most residential heating needs with two-stage burner
- Horizontal configuration suits tight attic or basement installations up to 26 inches deep
- 10-year warranty with online registration provides solid protection
Cons
- 80% AFUE is entry-level for furnaces; high-efficiency models reach 95%+ AFUE
- Single-stage compressor runs at full capacity or off, missing mid-load efficiency opportunities
- 71.5 dB noise level is moderately loud during peak operation
Who Should Buy
Best For
Budget-conscious homeowners in zones 3-5 replacing 15-20-year-old systems who want reasonable efficiency without premium pricing. Contractors installing in rental properties or fix-and-flip scenarios where upfront cost matters more than long-term operating expenses.
Consider Alternatives If
Homeowners in severe climates or those seeking 95%+ AFUE furnaces and variable-capacity cooling should look at premium Goodman or Lennox units instead.
Installation
Horizontal configuration requires 21 by 21.125 by 26-inch clearance and metal exhaust flue. Electrical demands are straightforward: 120V, 1-phase, 60Hz with 17.1 to 25-amp breaker sizing. Suction line insulation (3/4 inch thickness) and supplied piping connections (3/8 inch liquid, 7/8 inch suction) are standard installations manageable by any licensed HVAC contractor.
Warranty & Reliability
Ten-year full warranty applies with online registration through Goodman. This covers compressor, heat exchanger, and major components against defects. Registration is essential, so save documentation and complete enrollment promptly after installation to avoid warranty voidance.
Specifications
| SKU | LS38783850 |
| Brand/Manufacturer | Online Supply |
| Cooling BTU | 29,000 |
| Heating BTU | 100,000 |
| Refrigerant | R410A or R22 |
| Electrical | 120 V. 1 Phase 60 Hz |
| Warranty | 10 Years with Online Registration |
| Decibel Level (dBA) | 71.5 |
| Weight (in lbs) | 30.000000 |
| Feature | Spec |
| Energy Star | Yes |
| SEER1 (Efficiency) | 16 |
| Condenser Stages | Single Stage |
| Compressor Type | Scroll |
| Liquid Valve Size | 3/8" |
| Suction Valve Size | 7/8" |
| Max Breaker Size | 25 amps |
| Min. Breaker Size | 17.1 amps |
| Tonnage | 3.5 Ton |
| Height | 21" |
| Width | 21.125" |
| Depth | 26" |
| Resources | CHPF Installation Manual CHPF Specifications Sheet Goodman Evaporator Coil Warranty You will need Adobe® Acrobat® Reader to view PDF documents. |
| Safety Information | PROPOSITION 65 WARNING This product and many products on our site may contain a chemical know to the state of California to cause cancer or birth defects or other reproductive harm. For more information about Proposition 65 please Click Here. |
| Airflow Direction | Upflow/Horizontal |
| Exhaust Flue Requirement | Metal |
| Furnace Efficiency / AFUE | 80% |
| Blower Motor | Variable Speed |
| Maximum CFM | 2000 |
| Configuration | Horizontal |
| Burner Stages | Two |
| Fuel Type | Propane, Natural Gas |
| Liquid Line | 3/8" |
| Suction Line | 7/8" |
| Style | A-Coil |
| Suction Line Insulation Thickness | 3/4" |
| Length | 50 feet |
Frequently Asked Questions
Affiliate disclosure: IndustrialRank earns a commission on qualifying purchases at no extra cost to you. We only recommend products we have independently reviewed.