Review
The Goodman 2-ton horizontal system represents a practical middle ground in the gas furnace market. Manufactured by a dependable OEM, it delivers 60,000 BTU heating capacity paired with 24,000 BTU cooling, making it suitable for modest residential applications. The horizontal A-coil configuration appeals to contractors managing tight overhead space, and Goodman's established service network keeps parts accessible. This isn't a premium offering, but it executes the fundamentals competently.
Performance specs reveal capable but not exceptional efficiency. The 80% AFUE rating meets minimum efficiency tiers across most U.S. regions, while the 13 SEER cooling efficiency sits midrange. The dual-stage burner cycles between high and low fire, reducing temperature swings and runtime noise. The multi-speed blower modulates to 1200 CFM maximum, matching load demands and cutting unnecessary runtime. However, 75 dB noise output during full-load operation will be noticeable in quiet spaces compared to variable-speed competitors.
Pros & Cons
Pros
- Two-stage burner reduces short-cycling and improves comfort during partial-load heating
- High-efficiency multi-speed blower motor maximizes airflow at 1200 CFM while minimizing energy waste
- 80% AFUE meets or exceeds baseline efficiency standards for gas furnaces in most jurisdictions
- Compact horizontal configuration fits tight attic and crawl space installations with 17.5-inch height
- R410A refrigerant option provides future-proof compatibility as R22 phases out
- 10-year warranty with online registration provides solid consumer protection
Cons
- 13 SEER rating is mid-tier, not Energy Star rated, so total system efficiency lags premium units by 15-20%
- 80% AFUE means 20% of heating energy exits as waste, higher than condensing furnaces reaching 95%+
- 75 dB noise level runs louder than inverter-driven competitors, noticeable in quiet homes
- Single-stage condenser limits part-load cooling efficiency during mild weather
- Requires metal exhaust flue, adding installation cost versus direct-vent alternatives
Who Should Buy
Best For
Contractors installing budget-conscious systems in moderate climates where extreme efficiency gains don't justify premium pricing, and homeowners replacing older equipment who value reliability over cutting-edge performance. This unit works well in areas with mild winters and moderate cooling demands.
Consider Alternatives If
Anyone in cold northern climates needing maximum heating efficiency should compare 95% AFUE condensing furnaces, and homes in hot climates warrant higher SEER ratings like 16+ for meaningful cooling savings.
Installation
Installation complexity remains moderate. The unit requires 208/230V single-phase 60Hz power with circuit protection between 10.3 and 15 amps, making it compatible with standard residential electrical. The horizontal configuration needs careful framing clearance with 17.5-inch height, 21.125-inch width, and 26-inch depth. Metal exhaust flue requirement adds ductwork cost, and refrigerant line sizing accepts 3/8-inch liquid and 3/4-inch suction lines with 50-foot maximum run length. Sweat valve connections demand soldering skill.
Warranty & Reliability
Goodman backs this unit with a 10-year parts warranty activated through online registration. Coverage typically includes compressor and sealed components, though labor and service calls carry separate terms varying by dealer. Online registration is straightforward but mandatory to activate full protection. This warranty matches mid-tier competition but trails premium brands offering 12-year or lifetime compressor coverage. Retain documentation carefully.
Specifications
| SKU | LS38343850 |
| Brand/Manufacturer | Online Supply |
| Cooling BTU | 24,000 |
| Heating BTU | 60,000 |
| Refrigerant | R410A or R22 |
| Electrical | 208 / 230 V. 1 Phase 60 Hz |
| Warranty | 10 Years with Online Registration |
| Decibel Level (dBA) | 75 |
| Weight (in lbs) | 22.000000 |
| Feature | Spec |
| Airflow Direction | Upflow/Horizontal |
| Exhaust Flue Requirement | Metal |
| Furnace Efficiency / AFUE | 80% |
| Blower Motor | High Efficiency Multi-Speed |
| Maximum CFM | 1200 |
| Configuration | Horizontal |
| Burner Stages | Two |
| Fuel Type | Gas |
| Height | 17.5" |
| Width | 21.125" |
| Depth | 26" |
| Resources | CHPF Installation Manual CHPF Specifications Sheet Goodman Evaporator Coil Warranty You will need Adobe® Acrobat® Reader to view PDF documents. |
| Safety Information | PROPOSITION 65 WARNING This product and many products on our site may contain a chemical know to the state of California to cause cancer or birth defects or other reproductive harm. For more information about Proposition 65 please Click Here. |
| Replaces | GSX130242 |
| Energy Star | No |
| SEER1 (Efficiency) | 13 |
| Condenser Stages | Single Stage |
| Compressor Type | Rotary |
| Liquid Line | 3/8" |
| Suction Line | 3/4" |
| Liquid Valve Size | 3/8" |
| Max Breaker Size | 15 amps |
| Min. Breaker Size | 10.3 amps |
| Tonnage | 2.5 Ton |
| Valve Type | Sweat |
| Style | A-Coil |
| Suction Line Insulation Thickness | 3/4" |
| Length | 50 feet |
Frequently Asked Questions
Affiliate disclosure: IndustrialRank earns a commission on qualifying purchases at no extra cost to you. We only recommend products we have independently reviewed.