Review
The ACiQ ACIQ-24-EHPD-UPG positions itself as the value champion in the 2-ton combined furnace-condenser market. This downflow-capable unit combines Goodman's manufacturing footprint with aggressive pricing, targeting contractors balancing equipment cost against customer budgets. The 96% AFUE furnace paired with 13 SEER1 cooling creates a respectable baseline system that doesn't sacrifice efficiency for price. Energy Star certification confirms legitimate performance standards, and the unit replaces Goodman's GSX130242, suggesting proven design fundamentals.
Performance numbers tell a straightforward story. The furnace delivers 80,000 BTU heating output across two burner stages, while the air conditioner produces 24,000 BTU cooling at 13 SEER1 with single-stage compression. The variable-speed ECM blower handles 1,600 CFM maximum airflow, automatically modulating to match heating and cooling loads. Electrical requirements are modest: 115V single-phase with 10.3 to 15 amp breaker sizing, making retrofit retrofits easier. R454B refrigerant meets 2023 environmental standards without requiring complete system redesigns.
Pros & Cons
Pros
- 96% AFUE heating efficiency qualifies for rebates in most utility districts and minimizes gas waste
- 13 SEER1 cooling with Energy Star certification handles 24,000 BTU output in single-stage configuration
- Variable-speed ECM blower motor adjusts airflow to 1,600 CFM maximum, improving comfort and reducing runtime noise
- Two-stage burner provides modulating heat output for better temperature control during mild weather
- PVC flue compatibility eliminates expensive stainless steel venting costs on retrofit installations
- R454B refrigerant meets current EPA standards with lower GWP environmental profile
Cons
- Single-stage compressor cannot modulate cooling capacity, limiting efficiency in partial-load conditions
- 75 dB noise level runs louder than two-stage units, noticeable in open-concept homes during operation
- 3.5 ton tonnage creates oversizing risk in smaller homes, shortening equipment lifespan through short cycling
Who Should Buy
Best For
Budget-conscious contractors and homeowners in mixed climates needing both strong heating and cooling want this system. It's ideal for moderate-sized homes (1,200-1,800 sq ft) where upfront cost matters more than variable-speed cooling sophistication.
Consider Alternatives If
Skip this if you live in cooling-dominant climates, need whisper-quiet operation, or want modulating compressor technology for seasonal efficiency optimization.
Installation
Installation follows standard split-system protocol with 50-foot lineset in 3/4-inch suction and 3/8-inch liquid configurations. The A-coil style works with both upflow and downflow orientations, fitting tight equipment closets and basement corners. PVC exhaust flue requirement simplifies venting compared to stainless steel alternatives. Weight of 120 pounds permits single-technician handling. Sweat valve connections demand basic brazing competency but no exotic skills.
Warranty & Reliability
Goodman backs this unit with 10-year parts coverage upon online registration, standard across their product line. This length protects against compressor failure and heat exchanger cracks during the critical early operating years. Registration requirement is straightforward and increases coverage significantly versus non-registered 5-year terms. No labor coverage, so service calls remain out-of-pocket after year two.
Specifications
| SKU | ACIQ-24-EHPD-UPG |
| Brand/Manufacturer | ACiQ |
| Cooling BTU | 24,000 |
| Heating BTU | 80,000 |
| Refrigerant | R454B |
| Electrical | 115 V. 1 Phase 60 Hz |
| Warranty | 10 Years with Online Registration |
| Decibel Level (dBA) | 75 |
| Weight (in lbs) | 120.000000 |
| Feature | Spec |
| Replaces | GSX130242 |
| Energy Star | Yes |
| SEER1 (Efficiency) | 13 |
| Condenser Stages | Single Stage |
| Compressor Type | Rotary |
| Liquid Line | 3/8" |
| Suction Line | 3/4" |
| Liquid Valve Size | 3/8" |
| Max Breaker Size | 15 amps |
| Min. Breaker Size | 10.3 amps |
| Tonnage | 3.5 Ton |
| Valve Type | Sweat |
| Height | 30" |
| Width | 21" |
| Depth | 21" |
| Resources | CAPF Installation Manual CAPF Specifications Sheet Goodman Evaporator Coil Warranty You will need Adobe® Acrobat® Reader to view PDF documents. |
| Safety Information | PROPOSITION 65 WARNING This product and many products on our site may contain a chemical know to the state of California to cause cancer or birth defects or other reproductive harm. For more information about Proposition 65 please Click Here. |
| AHRI Certificate Number | 7368843 |
| Airflow Direction | Downflow/Horizontal |
| Exhaust Flue Requirement | Plastic / PVC |
| Product Features | Rebate Available |
| Furnace Efficiency / AFUE | 96% |
| Blower Motor | Variable Speed - ECM |
| Maximum CFM | 1600 |
| Configuration | Upflow / Downflow |
| Burner Stages | Two |
| Fuel Type | Propane, Natural Gas |
| Style | A-Coil |
| Suction Line Insulation Thickness | 3/4" |
| Length | 50 feet |
Frequently Asked Questions
Affiliate disclosure: IndustrialRank earns a commission on qualifying purchases at no extra cost to you. We only recommend products we have independently reviewed.