2 Ton 13 SEER 96% AFUE 80,000 BTU Goodman Gas Furnace and Air Conditioner System - Upflow Review 2026

// Bottom Line

This ACiQ system is ideal for contractors and homeowners upgrading older 2-ton equipment on a tight budget without sacrificing heating efficiency. The 96% AFUE furnace and 13 SEER cooling make it a solid mid-range choice for moderate climates where both heating and cooling matter equally.

Review

The ACiQ 2-ton combination furnace and air conditioner system represents a pragmatic choice for contractors and homeowners prioritizing heating performance without premium pricing. At $464, this upflow configuration delivers solid specifications that don't attempt luxury features, instead focusing on proven technology with modern refrigerant compliance. The system carries AHRI certification (7368835) confirming genuine performance claims, a baseline requirement that many budget units skip entirely.

On the heating side, the 96% AFUE efficiency is genuinely competitive, using two burner stages to deliver 80,000 BTU output with minimal energy waste. Cooling operates at 13 SEER1 and 24,000 BTU, which handles moderate load conditions adequately. The variable-speed ECM blower motor is the standout feature here, automatically adjusting to 1600 CFM maximum based on demand rather than running at constant speed. This reduces wasted electricity and improves part-load efficiency, particularly valuable during shoulder seasons when systems cycle frequently.

Pros & Cons

Pros

96% AFUE furnace efficiency exceeds most competitors in this price range, reducing heating costs significantly
Variable-speed ECM blower motor optimizes airflow and reduces electricity consumption compared to single-speed motors
Uses R454B refrigerant, a low-GWP alternative that future-proofs against refrigerant phase-outs
Two-stage burner allows precise heating control and improved comfort during mild weather
Compact 21 x 21 x 22 inch footprint fits tight equipment closets and basements
10-year parts warranty with online registration provides reasonable peace of mind protection

Cons

13 SEER1 cooling efficiency is adequate but trails newer 14-16 SEER units by a noticeable margin on summer cooling costs
Single-stage condenser limits modulation during partial-load conditions, less efficient than two-stage alternatives
75 dB noise level is moderate, potentially noticeable in quiet residential spaces during cooling cycles

Who Should Buy

Best For

Contractors seeking affordable equipment for rental properties or moderate-climate residential replacements will appreciate the value-to-efficiency ratio. Homeowners in heating-dominant regions who prioritize furnace efficiency over air conditioning performance and operate on constrained renovation budgets are the ideal fit.

Consider Alternatives If

Buyers in hot climates needing primary cooling capability or those wanting top-tier efficiency ratings should explore 14+ SEER systems, even at higher upfront cost.

2 Ton 13 SEER 96% AFUE 80,000 BTU Goodman Gas Furn

$464

Buy at HVACDirect →

Installation

Installation requires 208/230V single-phase 60Hz electrical service with 10.3 to 15 amp breaker sizing, standard for residential applications. The upflow/horizontal configuration accepts PVC or plastic exhaust flue, simplifying venting compared to older metal duct requirements. Right-side flue location provides layout flexibility. A-coil design requires proper refrigerant line routing using supplied 3/8 inch liquid and 3/4 inch suction lines with 3/4 inch insulation thickness up to 50 feet.

Warranty & Reliability

ACiQ provides a 10-year parts warranty activated through online registration, covering compressor, blower motor, and heat exchanger defects. This exceeds many competitors at this price point but requires upfront registration within 30 days of installation. Labor costs and refrigerant are typically excluded, so clarify repair scope before purchase.

Specifications

SKU	ACIQ-24-EHPD-UPG
Brand/Manufacturer	ACiQ
Cooling BTU	24,000
Heating BTU	80,000
Refrigerant	R454B
Electrical	208 / 230 V. 1 Phase 60 Hz
Warranty	10 Years with Online Registration
Decibel Level (dBA)	75
Weight (in lbs)	120.000000
Feature	Spec
AHRI Certificate Number	7368835
Airflow Direction	Upflow/Horizontal
Exhaust Flue Requirement	Plastic / PVC
Furnace Efficiency / AFUE	96%
Blower Motor	Variable Speed - ECM
Maximum CFM	1600
Configuration	Upflow / Downflow
Flue Location	Right
Energy Star	No
Burner Stages	Two
Fuel Type	Propane, Natural Gas
Height	22"
Width	21"
Depth	21"
Resources	CAPT Installation Manual CAPT Specifications Sheet Goodman Evaporator Coil Warranty You will need Adobe® Acrobat® Reader to view PDF documents.
Safety Information	PROPOSITION 65 WARNING This product and many products on our site may contain a chemical know to the state of California to cause cancer or birth defects or other reproductive harm. For more information about Proposition 65 please Click Here.
Replaces	GSX130242
SEER1 (Efficiency)	13
Condenser Stages	Single Stage
Compressor Type	Rotary
Liquid Line	3/8"
Suction Line	3/4"
Liquid Valve Size	3/8"
Max Breaker Size	15 amps
Min. Breaker Size	10.3 amps
Tonnage	2.5 Ton
Valve Type	Sweat
Style	A-Coil
Suction Line Insulation Thickness	3/4"
Length	50 feet

Frequently Asked Questions

Why is this system cheaper than competitors with similar specs? +

ACiQ prioritizes direct-to-contractor sales without heavy brand marketing budgets, passing savings to buyers. The single-stage condenser and lack of smart controls reduce manufacturing complexity. Quality remains solid, with AHRI certification and proven component sourcing, so the lower price reflects efficiency strategy rather than corner-cutting.

Will this fit my existing ductwork and flue setup? +

The compact 21 x 21 x 22 inch dimensions fit tight spaces well. PVC flue compatibility modernizes older metal systems easily. Upflow configuration works for basements, closets, and crawlspaces. However, verify your current ductwork handles 1600 CFM maximum airflow to avoid bottlenecks that reduce efficiency gains.

How much will this save on heating compared to older furnaces? +

A 96% AFUE furnace converts 96 cents per dollar into heat versus approximately 80% for units installed before 2010. On a $1,200 annual heating bill, you'd save roughly $190 per year. Payback depends on replacement cost and local gas prices, typically 3 to 5 years for heating-focused applications.

Is 13 SEER sufficient, or should I upgrade for cooling? +

At 13 SEER, cooling performance is acceptable for mild to moderate climates but lags in hot regions. Systems at 14 to 16 SEER cost 15 to 25 percent more. If cooling run hours exceed 2000 annually, the higher efficiency pays back in 5 to 8 years through reduced electricity use.

What does the 10-year warranty actually cover? +

Parts coverage applies to compressor failure, blower motor defects, and heat exchanger cracks when registered within 30 days. Labor, refrigerant, and damage from improper installation are excluded. Always confirm specific exclusions with your installer before purchase.

Affiliate disclosure: IndustrialRank earns a commission on qualifying purchases at no extra cost to you. We only recommend products we have independently reviewed.