Review
The Goodman 2-ton combo system pairs a 97% AFUE gas furnace with a 13 SEER1 air conditioner into one integrated unit designed for downflow installations. This SKU replaces the older GSX130242 and comes equipped with a variable-speed ECM blower motor, modulating furnace burner, and modern R454B refrigerant. At 120 pounds and compact dimensions of 34.5 inches tall by 17.5 inches wide, it fits tight utility closets and basement corners where space is premium. Goodman's reputation for no-frills reliability rather than cutting-edge features positions this as a solid contractor choice.
Performance specs tell the story: the furnace delivers 80,000 BTU of heating output with modulating burner control, while the AC side handles 24,000 BTU of cooling at single-stage capacity. The 13 SEER1 rating and Energy Star certification mean year-round efficiency gains over 10-12 SEER1 competitors. The ECM blower varies from quiet operation to 1200 CFM maximum, adapting to heating and cooling demand. Combined with PVC exhaust flue compatibility and standard 3/8 inch suction lines, installation follows familiar protocols contractors know well.
Pros & Cons
Pros
- 97% AFUE furnace efficiency cuts heating waste significantly compared to 80-90% models, saving roughly 15-20% on winter bills
- 13 SEER1 air conditioner meets Energy Star standards and uses modern R454B refrigerant, reducing environmental impact
- Modulating burner stages automatically adjust output rather than cycling full on/off, improving comfort and reducing noise
- Variable-speed ECM blower motor adjusts CFM from near-silent to 1200 CFM maximum, eliminating the constant roar of single-speed units
- Downflow A-coil configuration works in most residential installations where space above the furnace is limited
Cons
- Single-stage AC compressor cannot modulate cooling capacity, so you get either full cooling or nothing, less efficient than two-stage units in mild weather
- 75 dBA noise level is moderately loud for outdoor operation, noticeably louder than quieter high-efficiency units rated 70 dBA or below
- Downflow configuration limits placement options, ruling out basement installations where horizontal discharge is impractical
Who Should Buy
Best For
Contractors and homeowners upgrading 15-25 year old furnace-AC systems in northern and central climates where heating dominates energy costs. This system justifies itself quickly through reduced natural gas consumption, especially if your current furnace scores below 90% AFUE.
Consider Alternatives If
Skip this if you're in a pure cooling climate, if single-stage AC cycling bothers you, or if noise under 70 dBA is essential near bedrooms. Also avoid if you lack upflow/horizontal space, since the downflow-only configuration won't work in all homes.
Installation
This downflow A-coil requires above-furnace placement with gravity return airflow, limiting retrofit options to homes with upflow capability. Electrical needs are minimal: 115V single-phase 60 Hz power with a 10.3-15 amp breaker. Refrigerant line connections use 3/4 inch suction and 3/8 inch liquid lines with sweat valve fittings. PVC exhaust flue on the right side needs proper slope and venting per Goodman specs. Most experienced HVAC techs complete installation in 4-6 hours.
Warranty & Reliability
Goodman covers this system with a 10-year parts warranty, activated through online registration at no cost. This is industry-standard protection for mid-range equipment. Coverage includes compressor, blower motor, and furnace heat exchanger. Labor costs and routine maintenance fall outside coverage. Registration takes five minutes and is worth doing immediately to lock in the full term.
Specifications
| SKU | ACIQ-24-EHPD-UPG |
| Brand/Manufacturer | ACiQ |
| Cooling BTU | 24,000 |
| Heating BTU | 80,000 |
| Refrigerant | R454B |
| Electrical | 115 V. 1 Phase 60 Hz |
| Warranty | 10 Years with Online Registration |
| Decibel Level (dBA) | 75 |
| Weight (in lbs) | 120.000000 |
| Feature | Spec |
| Replaces | GSX130242 |
| Energy Star | Yes |
| SEER1 (Efficiency) | 13 |
| Condenser Stages | Single Stage |
| Compressor Type | Rotary |
| Liquid Line | 3/8" |
| Suction Line | 3/4" |
| Liquid Valve Size | 3/8" |
| Max Breaker Size | 15 amps |
| Min. Breaker Size | 10.3 amps |
| Tonnage | 3 Ton |
| Valve Type | Sweat |
| Height | 34.5" |
| Width | 17.5" |
| Depth | 28.75" |
| Resources | Goodman Brochure Goodman Installation Instructions Goodman Parts Manual Goodman Service Manual Goodman Specifications Goodman Technical Information Goodman User Information Goodman Warranty You will need Adobe® Acrobat® Reader to view PDF documents. |
| Safety Information | PROPOSITION 65 WARNING This product and many products on our site may contain a chemical know to the state of California to cause cancer or birth defects or other reproductive harm. For more information about Proposition 65 please Click Here. |
| Configuration | Downflow/Horizontal |
| Style | A-Coil |
| AHRI Certificate Number | 7424270 |
| Airflow Direction | Downflow/Horizontal |
| Exhaust Flue Requirement | Plastic / PVC |
| Product Features | Rebate Available |
| Furnace Efficiency / AFUE | 97% |
| Blower Motor | Variable Speed - ECM |
| Maximum CFM | 1200 |
| Flue Location | Right |
| Burner Stages | Modulating |
| Fuel Type | Propane, Natural Gas |
| Suction Line Insulation Thickness | 3/4" |
| Length | 50 feet |
Frequently Asked Questions
Affiliate disclosure: IndustrialRank earns a commission on qualifying purchases at no extra cost to you. We only recommend products we have independently reviewed.