Review
The 2-ton Goodman gas furnace and air conditioning system represents a traditional approach to residential climate control. Manufactured by Online Supply under the Goodman brand, this unit combines a 24,000 BTU air conditioner with a 60,000 BTU furnace in a dedicated downflow configuration. It's designed for retrofit installations where existing ductwork and space constraints limit equipment choices. The A-coil style and modest dimensions (33.4 inches tall, 14 inches wide, 28 inches deep) make it a natural fit for closet or utility room placement.
Performance metrics show a 14 SEER cooling rating and 80% AFUE heating efficiency, which are respectable but not cutting-edge. The single-stage rotary compressor runs continuously at full capacity when cooling demand exists, rather than modulating output. Heating arrives through a single-stage burner burning natural gas or propane. The multi-speed PSC blower motor delivers up to 1200 CFM, allowing better airflow distribution than fixed-speed alternatives. Electrical requirements are modest: 120V single-phase power with a 14.3 to 25-amp breaker range.
Pros & Cons
Pros
- 14 SEER rating delivers solid cooling efficiency with 24,000 BTU capacity for 2-ton applications
- 80% AFUE furnace with 60,000 BTU output handles heating in moderate climates without excessive fuel consumption
- Single-stage rotary compressor is proven reliable architecture used across residential markets
- Multi-speed PSC blower motor with 1200 CFM maximum allows better comfort control and zoning options
- 10-year warranty with online registration provides reasonable protection for a mid-tier system
Cons
- No Energy Star certification means efficiency lags premium competitors by 2-3 SEER points
- Single-stage burner and compressor cannot modulate for part-load efficiency, increasing runtime costs
- 71 dB noise level is noticeably louder than variable-speed alternatives, especially during peak cooling
Who Should Buy
Best For
Homeowners in moderate climates with tight budgets who need a straightforward replacement for existing downflow systems. Contractors working in retrofit applications where equipment must fit within established ductwork and case dimensions appreciate the A-coil design and standard electrical requirements.
Consider Alternatives If
Anyone in hot climates should look at higher SEER models, and homeowners prioritizing quiet operation or minimal utility bills should consider variable-speed alternatives despite higher upfront costs.
Installation
Installation follows standard patterns for downflow systems. Suction lines measure 3/4 inch with 3/4 inch insulation thickness, while liquid lines run 3/8 inch. Both refrigerant types (R410A and R22) are supported, though R410A is standard in new equipment. The unit requires a metal exhaust flue for furnace venting. Multi-speed blower connection allows commissioning flexibility. Total weight is 22 pounds, simplifying handling in tight spaces. Professional installation ensures proper refrigerant charge and airflow commissioning.
Warranty & Reliability
Goodman covers this system for 10 years parts and labor when you complete online registration after purchase. This mid-tier protection reflects the system's solid but non-premium positioning. Registration is straightforward and critical, as unregistered units receive shorter coverage. The warranty covers compressor, coil, and heat exchanger defects, which represent the most expensive failure points. Keep documentation organized and accessible for claims.
Specifications
| SKU | LS38343850 |
| Brand/Manufacturer | Online Supply |
| Cooling BTU | 24,000 |
| Heating BTU | 60,000 |
| Refrigerant | R410A or R22 |
| Electrical | 120 V. 1 Phase 60 Hz |
| Warranty | 10 Years with Online Registration |
| Decibel Level (dBA) | 71 |
| Weight (in lbs) | 22.000000 |
| Feature | Spec |
| Energy Star | No |
| SEER1 (Efficiency) | 14 |
| Condenser Stages | Single Stage |
| Compressor Type | Rotary |
| Liquid Valve Size | 3/8" |
| Suction Valve Size | 3/4" |
| Max Breaker Size | 25 amps |
| Min. Breaker Size | 14.3 amps |
| Tonnage | 3 Ton |
| Height | 33 3/8" |
| Width | 14" |
| Depth | 28" |
| Resources | Goodman Brochure Goodman Installation Manual Goodman Parts Manual Goodman Service Manual Goodman Specifications Goodman Technical Information Goodman User Information Goodman Warranty You will need Adobe® Acrobat® Reader to view PDF documents. |
| Safety Information | PROPOSITION 65 WARNING This product and many products on our site may contain a chemical know to the state of California to cause cancer or birth defects or other reproductive harm. For more information about Proposition 65 please Click Here. |
| Configuration | Dedicated Downflow |
| Liquid Line | 3/8" |
| Suction Line | 3/4" |
| Style | A-Coil |
| Exhaust Flue Requirement | Metal |
| Furnace Efficiency / AFUE | 80% |
| Blower Motor | Multi Speed - PSC |
| Maximum CFM | 1200 |
| Burner Stages | Single |
| Fuel Type | Propane, Natural Gas |
| Suction Line Insulation Thickness | 3/4" |
| Length | 50 feet |
Frequently Asked Questions
Affiliate disclosure: IndustrialRank earns a commission on qualifying purchases at no extra cost to you. We only recommend products we have independently reviewed.