Review
The Goodman 2-ton upflow system represents a no-frills approach to residential HVAC replacement. Priced at $1909, it occupies the practical middle ground between bare-bones equipment and premium units. This SKU LS38343850 comes from Online Supply and carries solid AHRI certification number 204633301, confirming proper engineering and testing. The compact footprint, measuring 26 inches tall by 17.5 inches wide by 21 inches deep, fits most standard closet installations. It's designed for contractors who need reliable equipment that won't break project budgets.
Performance specs tell a straightforward story. The 60,000 BTU heating capacity with 80% AFUE efficiency handles moderate winter demand effectively, though heating bills will run higher than 95% AFUE alternatives. Cooling delivers 24,000 BTU at 14 SEER, matching the stated 2-ton rating and providing respectable summer efficiency. The variable-speed blower motor reaching 1600 CFM maximum provides flexibility, running slower during mild conditions and faster when needed. Two-stage burner design reduces short-cycling and improves comfort. 208/230V single-phase electrical requirements are standard for most homes.
Pros & Cons
Pros
- 14 SEER cooling efficiency is solid for the price point at $1909, delivering good summer performance
- Two-stage burner system provides modulating heat output, reducing energy waste during mild winter days
- Variable-speed blower motor (1600 CFM maximum) adjusts airflow for comfort and efficiency rather than running full-time
- Dual-fuel capability supports both natural gas and propane, offering installation flexibility for rural or urban properties
- 10-year warranty with online registration covers manufacturer defects and provides peace of mind
- Metal exhaust flue requirement is standard and contractor-friendly, avoiding special venting complications
Cons
- 80% AFUE furnace efficiency lags behind modern 95% units, meaning higher heating bills in cold climates
- Not Energy Star certified, disqualifying buyers from utility rebates that could offset purchase price
- 71 decibel operation is noticeably louder than premium models, potentially bothersome in open floor plans or bedroom proximity
Who Should Buy
Best For
Contractors handling urgent replacement jobs for price-sensitive customers and homeowners in moderate climates seeking reliable equipment without premium costs. This system works well for rental properties, secondary residences, or situations where budget constraints take priority over cutting-edge efficiency.
Consider Alternatives If
Anyone in extreme cold climates should look at higher AFUE furnaces, and buyers seeking Energy Star rebates or aiming for lowest lifetime operating costs should consider 95% AFUE models despite higher upfront investment.
Installation
Installation is straightforward for experienced HVAC technicians. The upflow configuration suits basement or closet placement in most homes. Metal exhaust flue piping is required and widely available. Refrigerant lines come pre-charged with R410A or R22 options. Liquid and suction line sizing at 3/8 inch and 3/4 inch respectively are standard fittings. Electrical connection requires 14.3 to 25 amp breakers depending on load conditions. Installation time typically runs 4 to 6 hours for experienced crews.
Warranty & Reliability
Goodman backs this unit with a 10-year parts warranty upon online registration, covering manufacturer defects in compressors, heat exchangers, and coils. This is competitive for the price point, though some premium brands offer lifetime warranties on specific components. Registration is required to activate coverage, so documentation and proof of purchase matter. The evaporator coil carries separate warranty protection through Goodman's published terms.
Specifications
| SKU | LS38343850 |
| Brand/Manufacturer | Online Supply |
| Cooling BTU | 24,000 |
| Heating BTU | 60,000 |
| Refrigerant | R410A or R22 |
| Electrical | 208 / 230 V. 1 Phase 60 Hz |
| Warranty | 10 Years with Online Registration |
| Decibel Level (dBA) | 71 |
| Weight (in lbs) | 22.000000 |
| Feature | Spec |
| AHRI Certificate Number | 204633301 |
| Airflow Direction | Upflow/Horizontal |
| Exhaust Flue Requirement | Metal |
| Furnace Efficiency / AFUE | 80% |
| Blower Motor | Variable Speed |
| Maximum CFM | 1600 |
| Configuration | Upflow / Downflow |
| Burner Stages | Two |
| Fuel Type | Propane, Natural Gas |
| Height | 26" |
| Width | 17.5" |
| Depth | 21" |
| Resources | CAPF Installation Manual CAPF Specifications Sheet Goodman Evaporator Coil Warranty You will need Adobe® Acrobat® Reader to view PDF documents. |
| Safety Information | PROPOSITION 65 WARNING This product and many products on our site may contain a chemical know to the state of California to cause cancer or birth defects or other reproductive harm. For more information about Proposition 65 please Click Here. |
| Energy Star | No |
| SEER1 (Efficiency) | 14 |
| Condenser Stages | Single Stage |
| Compressor Type | Rotary |
| Liquid Valve Size | 3/8" |
| Suction Valve Size | 3/4" |
| Max Breaker Size | 25 amps |
| Min. Breaker Size | 14.3 amps |
| Tonnage | 3 Ton |
| Liquid Line | 3/8" |
| Suction Line | 3/4" |
| Style | A-Coil |
| Suction Line Insulation Thickness | 3/4" |
| Length | 50 feet |
Frequently Asked Questions
Affiliate disclosure: IndustrialRank earns a commission on qualifying purchases at no extra cost to you. We only recommend products we have independently reviewed.