Review
The Goodman 2-ton gas furnace and air conditioner combination sits squarely in the economy segment, offering practical cooling and heating at an attractive $643 price point. Goodman's reputation for reliable, no-frills equipment holds here, with straightforward engineering that prioritizes affordability over cutting-edge features. This upflow configuration suits most standard residential installations, and the dual-stage burner setup shows Goodman's effort to balance comfort with efficiency at this price tier.
Performance numbers tell the real story. The 14 SEER cooling efficiency handles moderate heat loads capably, while the 60,000 BTU heating capacity with 80% AFUE covers most residential needs in non-extreme climates. The high-efficiency multi-speed blower motor maxes out at 1,200 CFM, supporting proper air distribution without excessive noise. However, the 71 dB operating level runs louder than premium competitors, and the single-stage condenser can't modulate cooling output for partial-load efficiency like variable systems do.
Pros & Cons
Pros
- Excellent value at $643 for a complete 2-ton system with dual-stage burner and high-efficiency blower motor
- 14 SEER cooling efficiency paired with 80% AFUE heating covers most residential needs competently
- Two-stage burner delivers better part-load efficiency and comfort during mild weather operation
- High-efficiency multi-speed blower motor supports up to 1,200 CFM for balanced airflow distribution
- 10-year warranty with online registration provides decent protection against manufacturing defects
- Flexible refrigerant compatibility allows R410A or R22 depending on your installation region
Cons
- 80% AFUE is entry-level by modern standards, missing the 90%+ efficiency of condensing furnaces
- 71 dB noise level runs louder than premium systems, noticeable in quiet spaces
- Single-stage condenser means cooling operates at one speed, less efficient than variable-capacity units
- Not ENERGY STAR rated despite 14 SEER, indicating it just misses that certification threshold
- Tonnage inconsistency in specs lists both 2 ton and 3 ton, creating potential confusion
Who Should Buy
Best For
Budget-conscious homeowners in moderate climates needing to replace 15-20 year old furnace and AC units simultaneously. This system works well for homes where utility costs aren't the primary concern and local building codes don't mandate higher efficiency standards.
Consider Alternatives If
Anyone in harsh winter climates, high-efficiency mandate areas, or those seeking quiet operation should look at condensing furnaces and variable-capacity cooling systems instead.
Installation
Installation requires standard split-system setup with proper line sizing using the included 3/8 inch liquid and 3/4 inch suction lines, both pre-insulated at 3/4 inch thickness. The 30 by 17.5 by 21 inch footprint fits typical furnace closets, though upflow orientation demands clear overhead space. You'll need 208/230V single-phase 60 Hz power with breaker sizing between 14.3 and 25 amps, and metal exhaust flue requirement means existing ductwork compatibility matters.
Warranty & Reliability
The 10-year warranty requires online registration to activate, covering defects in materials and workmanship. This is middle-of-the-road protection that guards against early failures but doesn't match extended warranties offered by premium brands. Registration is straightforward and necessary to validate coverage, so document your purchase and complete it immediately upon installation.
Specifications
| SKU | LS38343850 |
| Brand/Manufacturer | Online Supply |
| Cooling BTU | 24,000 |
| Heating BTU | 60,000 |
| Refrigerant | R410A or R22 |
| Electrical | 208 / 230 V. 1 Phase 60 Hz |
| Warranty | 10 Years with Online Registration |
| Decibel Level (dBA) | 71 |
| Weight (in lbs) | 22.000000 |
| Feature | Spec |
| Airflow Direction | Upflow/Horizontal |
| Exhaust Flue Requirement | Metal |
| Furnace Efficiency / AFUE | 80% |
| Blower Motor | High Efficiency Multi-Speed |
| Maximum CFM | 1200 |
| Configuration | Upflow / Downflow |
| Burner Stages | Two |
| Fuel Type | Gas |
| Height | 30" |
| Width | 17.5" |
| Depth | 21" |
| Resources | CAPF Installation Manual CAPF Specifications Sheet Goodman Evaporator Coil Warranty You will need Adobe® Acrobat® Reader to view PDF documents. |
| Safety Information | PROPOSITION 65 WARNING This product and many products on our site may contain a chemical know to the state of California to cause cancer or birth defects or other reproductive harm. For more information about Proposition 65 please Click Here. |
| Energy Star | No |
| SEER1 (Efficiency) | 14 |
| Condenser Stages | Single Stage |
| Compressor Type | Rotary |
| Liquid Valve Size | 3/8" |
| Suction Valve Size | 3/4" |
| Max Breaker Size | 25 amps |
| Min. Breaker Size | 14.3 amps |
| Tonnage | 3 Ton |
| Liquid Line | 3/8" |
| Suction Line | 3/4" |
| Style | A-Coil |
| Suction Line Insulation Thickness | 3/4" |
| Length | 50 feet |
Frequently Asked Questions
Affiliate disclosure: IndustrialRank earns a commission on qualifying purchases at no extra cost to you. We only recommend products we have independently reviewed.