Review
The Goodman 2-ton gas furnace and air conditioner system positions itself as a reliable, no-frills combo unit for homeowners seeking decent mid-range equipment without premium pricing. This downflow A-coil configuration targets smaller homes and straightforward HVAC replacements where contractors need proven hardware and straightforward installation. Goodman's broad industry presence means parts availability and service technician familiarity across most regions, reducing long-term maintenance headaches.
Performance specs reveal a competent but not cutting-edge system. The furnace delivers 80,000 BTU heating output at 92% AFUE, placing it solidly in the high-efficiency furnace category for gas units. Cooling delivers 24,000 BTU at 14 SEER, which meets modern baseline expectations but trails 16-18 SEER units in operational cost savings. The multi-speed blower reaches 1,600 CFM maximum, adequate for the 2-ton capacity. Single-stage compressor operation means efficiency remains constant regardless of load, a trade-off typical at this price tier.
Pros & Cons
Pros
- 92% AFUE furnace efficiency keeps heating costs competitive in winter months
- 14 SEER cooling delivers solid mid-range performance for moderate climates
- Lightweight at 22 lbs and compact (27.5 x 26 x 26 inches) for tight utility spaces
- Multi-speed blower motor adapts to various ductwork configurations
- PVC exhaust compatibility simplifies venting in newer construction
Cons
- Single-stage burner and condenser lack the efficiency gains of two-stage systems
- 71 dB noise level runs louder than premium models during operation
- Not Energy Star certified, missing potential rebate eligibility
Who Should Buy
Best For
Homeowners in HVAC service areas where Goodman parts and technicians are readily available, especially those replacing 10-15 year old systems in homes where budget matters more than peak efficiency. Contractors managing mid-range residential projects with straightforward downflow ductwork configurations.
Consider Alternatives If
Anyone in high-cooling-demand climates seeking SEER 16+ efficiency, or households that qualify for utility rebates requiring Energy Star certification should explore alternatives.
Installation
This system requires standard downflow installation with 208/230V single-phase 60Hz electrical service. The 25-amp maximum breaker sizing is straightforward for most residential panels. Right-side flue location and plastic PVC exhaust compatibility streamline venting setup. A-coil configuration integrates easily with existing furnace return plenums. Technicians should verify ductwork can handle the 1,600 CFM maximum airflow to avoid noise and efficiency loss. Suction line insulation at 3/4-inch thickness meets standard refrigerant piping requirements.
Warranty & Reliability
Goodman provides 10 years of coverage when you register the unit online, a reasonable protection span for component failures. Registration requirement is typical across the industry and typically takes 10 minutes. This warranty covers parts and compressor, though labor costs remain the homeowner's responsibility. Extended service plans are available from most installers for additional protection.
Specifications
| SKU | LS38343850 |
| Brand/Manufacturer | Online Supply |
| Cooling BTU | 24,000 |
| Heating BTU | 80,000 |
| Refrigerant | R410A |
| Electrical | 208 / 230 V. 1 Phase 60 Hz |
| Warranty | 10 Years with Online Registration |
| Decibel Level (dBA) | 71 |
| Weight (in lbs) | 22.000000 |
| Feature | Spec |
| Safety Information | PROPOSITION 65 WARNING This product and many products on our site may contain a chemical know to the state of California to cause cancer or birth defects or other reproductive harm. For more information about Proposition 65 please Click Here. |
| Airflow Direction | Downflow/Horizontal |
| Exhaust Flue Requirement | Plastic / PVC |
| Furnace Efficiency / AFUE | 92% |
| Blower Motor | Multi Speed |
| Maximum CFM | 1600 |
| Configuration | Upflow / Downflow |
| Flue Location | Right |
| Burner Stages | Single |
| Fuel Type | Gas |
| Height | 27.5" |
| Width | 26" |
| Depth | 26" |
| Resources | Goodman Installation Manual Goodman Specifications Goodman Brochure Goodman Warranty Information Goodman Service Instructions Goodman Kit Instructions Goodman Parts Manual You will need Adobe® Acrobat® Reader to view PDF documents. |
| Liquid Line | 3/8" |
| Suction Line | 3/4" |
| Tonnage | 2 Ton |
| Style | A-Coil |
| Energy Star | No |
| SEER1 (Efficiency) | 14 |
| Condenser Stages | Single Stage |
| Compressor Type | Rotary |
| Liquid Valve Size | 3/8" |
| Suction Valve Size | 3/4" |
| Max Breaker Size | 25 amps |
| Min. Breaker Size | 14.3 amps |
| Suction Line Insulation Thickness | 3/4" |
| Length | 50 feet |
Frequently Asked Questions
Affiliate disclosure: IndustrialRank earns a commission on qualifying purchases at no extra cost to you. We only recommend products we have independently reviewed.