Review
The Goodman 2-ton system represents a practical middle ground in residential HVAC. It delivers meaningful efficiency improvements over equipment installed 10-15 years ago without entering premium territory. The 100,000 BTU furnace and 24,000 BTU cooling capacity target homes between 800-1,200 square feet. Goodman's reputation for solid field performance, combined with straightforward downflow configuration and contractor-friendly design, makes this a reliable choice for replacement projects and new construction in moderate climates.
Performance numbers show genuine capability for the price point. The 92% AFUE furnace converts 92 cents of every gas dollar into usable heat, a measurable jump from 78-80% units still operating in many homes. The 14 SEER air conditioner delivers 24,000 BTU of cooling with rotary compressor durability. Multi-speed blower motor adjusts CFM up to 2,000, allowing better comfort modulation between heating and cooling seasons. Single-stage operation means less complexity but also less fine-tuned efficiency at part loads.
Pros & Cons
Pros
- 14 SEER cooling efficiency exceeds minimum standards and qualifies for some utility rebates
- 92% AFUE furnace conversion is significant fuel savings compared to 80% units still in the field
- Multi-speed blower motor adjusts airflow for comfort and efficiency in different seasons
- 2-ton capacity suits homes between 800-1,200 square feet with moderate climate demands
- PVC exhaust flue compatibility lowers installation costs in most residential settings
- 10-year warranty with online registration provides contractor peace of mind on service calls
Cons
- Single-stage burner and condenser limit part-load efficiency and precise temperature control
- 71 dB noise level slightly higher than variable-speed competitors, noticeable to some users
- Not ENERGY STAR certified, missing DOE recognition for high-efficiency systems
- R410A refrigerant phasedown means potential supply constraints and higher costs by 2030
Who Should Buy
Best For
Contractors replacing older 80% AFUE furnaces or 10 SEER AC units in modest-sized homes. Homeowners in mixed climates who prioritize upfront savings over premium efficiency and want reliable, straightforward equipment without smart controls or variable-speed compressors.
Consider Alternatives If
Buyers seeking ENERGY STAR certification, homes requiring whisper-quiet operation, or those building in hot climates where single-stage cooling creates temperature swings.
Installation
Downflow configuration fits basements and sideways installations. Requires 208/230V single-phase power with 14.3-25 amp breaker sizing. PVC exhaust flue compatibility simplifies venting through exterior walls or roofs. Liquid line at 3/8 inches and suction line at 3/4 inches follow standard connections. Pre-charged refrigerant lines come in 50-foot lengths, covering most residential runs without field charging. Most experienced HVAC technicians complete installation in 4-6 hours.
Warranty & Reliability
Ten-year parts warranty requires online registration within 30 days of purchase. Covers defects in workmanship and materials on furnace and air conditioner components. Does not cover labor, refrigerant top-ups, or damage from improper installation. This warranty aligns with industry standard for mid-tier residential equipment and provides reasonable protection for homeowners and contractor service obligations.
Specifications
| SKU | LS38343850 |
| Brand/Manufacturer | Online Supply |
| Cooling BTU | 24,000 |
| Heating BTU | 100,000 |
| Refrigerant | R410A |
| Electrical | 208 / 230 V. 1 Phase 60 Hz |
| Warranty | 10 Years with Online Registration |
| Decibel Level (dBA) | 71 |
| Weight (in lbs) | 22.000000 |
| Feature | Spec |
| Safety Information | PROPOSITION 65 WARNING This product and many products on our site may contain a chemical know to the state of California to cause cancer or birth defects or other reproductive harm. For more information about Proposition 65 please Click Here. |
| Airflow Direction | Downflow/Horizontal |
| Exhaust Flue Requirement | Plastic / PVC |
| Furnace Efficiency / AFUE | 92% |
| Blower Motor | Multi Speed |
| Maximum CFM | 2000 |
| Configuration | Upflow / Downflow |
| Flue Location | Right |
| Burner Stages | Single |
| Fuel Type | Gas |
| Height | 27.5" |
| Width | 26" |
| Depth | 26" |
| Resources | Goodman Installation Manual Goodman Specifications Goodman Brochure Goodman Warranty Information Goodman Service Instructions Goodman Kit Instructions Goodman Parts Manual You will need Adobe® Acrobat® Reader to view PDF documents. |
| Liquid Line | 3/8" |
| Suction Line | 3/4" |
| Tonnage | 2 Ton |
| Style | A-Coil |
| Energy Star | No |
| SEER1 (Efficiency) | 14 |
| Condenser Stages | Single Stage |
| Compressor Type | Rotary |
| Liquid Valve Size | 3/8" |
| Suction Valve Size | 3/4" |
| Max Breaker Size | 25 amps |
| Min. Breaker Size | 14.3 amps |
| Suction Line Insulation Thickness | 3/4" |
| Length | 50 feet |
Frequently Asked Questions
Affiliate disclosure: IndustrialRank earns a commission on qualifying purchases at no extra cost to you. We only recommend products we have independently reviewed.