Review
Goodman's 2-ton gas furnace and air conditioner combo represents the practical middle ground in residential HVAC. At $643, this downflow system from Online Supply targets replacement buyers seeking efficiency gains without premium positioning. The package combines a 60,000 BTU furnace with matching 24,000 BTU cooling capacity, making it suitable for smaller homes, additions, or light-load applications. Goodman maintains solid market presence in contractor circles, and this configuration hits the spec sheet requirements for code compliance across most regions.
The furnace delivers 96% AFUE efficiency, translating to measurable savings during heating season compared to 80-85% baseline equipment. Cooling performance of 14 SEER meets current minimum efficiency standards without reaching premium territory. The multi-speed blower motor adds practical value by reducing runtime noise and improving air distribution compared to fixed-speed alternatives. Single-stage compressor and burner mean less operational flexibility during partial-load conditions, but both components perform reliably during design-day demands. Maximum airflow of 1200 CFM handles typical ductwork runs up to 50 feet with proper sizing.
Pros & Cons
Pros
- 96% AFUE furnace efficiency reduces heating fuel consumption significantly compared to 80s-era units
- 14 SEER cooling efficiency meets modern baseline standards at a competitive $643 price point
- Multi-speed blower motor allows better temperature management than single-speed alternatives
- 10-year warranty with online registration provides reasonable protection for the investment
- Downflow/horizontal configuration works in basements, attics, and closets with flexible ducting
- PVC exhaust venting simplifies installation versus traditional metal flue requirements
Cons
- Single-stage compressor and burner lack variable-capacity efficiency gains found in higher-tier models
- 71 dB noise level runs louder than premium two-stage systems, noticeable in quiet rooms
- Not ENERGY STAR certified, missing rebates and efficiency recognition despite reasonable specs
- R410A refrigerant phaseout concerns mean potential future servicing complications
- Lightweight 22 lb unit suggests thinner cabinet construction versus commercial-grade alternatives
Who Should Buy
Best For
Homeowners in smaller homes or additions needing reliable heating and cooling without premium pricing, particularly those replacing 15+ year old systems. Budget-conscious buyers in moderate climates who can leverage the 96% AFUE furnace to offset modest cooling-season usage.
Consider Alternatives If
Anyone in ENERGY STAR rebate programs, homes requiring quiet operation, or regions with extreme seasonal demands should explore variable-capacity or two-stage alternatives.
Installation
Downflow configuration requires vertical mounting in crawlspaces, basements, or utility closets with adequate clearance around the 34.5-inch height and 28.75-inch depth. PVC exhaust venting simplifies routing compared to traditional metal flues. Electrical demands are modest at 115 V single phase with 14.3 to 25 amp breaker sizing. Refrigerant lines use standard 3/8-inch and 3/4-inch fittings with 3/4-inch insulation included. Most installations take 4 to 6 hours for experienced HVAC technicians.
Warranty & Reliability
Goodman provides 10-year parts coverage with online registration, protecting against compressor and heat exchanger failures. Warranty excludes normal wear, improper installation, and refrigerant charges. Registration is straightforward through Goodman's website and recommended within 30 days of startup. Contractor support is readily available for warranty claims, though some regional variation exists.
Specifications
| SKU | LS38343850 |
| Brand/Manufacturer | Online Supply |
| Cooling BTU | 24,000 |
| Heating BTU | 60,000 |
| Refrigerant | R410A or R22 |
| Electrical | 115 V. 1 Phase 60 Hz |
| Warranty | 10 Years with Online Registration |
| Decibel Level (dBA) | 71 |
| Weight (in lbs) | 22.000000 |
| Feature | Spec |
| Energy Star | No |
| SEER1 (Efficiency) | 14 |
| Condenser Stages | Single Stage |
| Compressor Type | Rotary |
| Liquid Valve Size | 3/8" |
| Suction Valve Size | 3/4" |
| Max Breaker Size | 25 amps |
| Min. Breaker Size | 14.3 amps |
| Tonnage | 3 Ton |
| Height | 34.5" |
| Width | 17.5" |
| Depth | 28.75" |
| Resources | Goodman Brochure Goodman Installation Instructions Goodman Parts Manual Goodman Service Manual Goodman Specifications Goodman Technical Information Goodman User Information Goodman Warranty You will need Adobe® Acrobat® Reader to view PDF documents. |
| Safety Information | PROPOSITION 65 WARNING This product and many products on our site may contain a chemical know to the state of California to cause cancer or birth defects or other reproductive harm. For more information about Proposition 65 please Click Here. |
| Configuration | Downflow/Horizontal |
| Liquid Line | 3/8" |
| Suction Line | 3/4" |
| Style | A-Coil |
| Airflow Direction | Downflow/Horizontal |
| Exhaust Flue Requirement | Plastic / PVC |
| Furnace Efficiency / AFUE | 96% |
| Blower Motor | Multi Speed |
| Maximum CFM | 1200 |
| Burner Stages | Single |
| Fuel Type | Gas |
| Suction Line Insulation Thickness | 3/4" |
| Length | 50 feet |
Frequently Asked Questions
Affiliate disclosure: IndustrialRank earns a commission on qualifying purchases at no extra cost to you. We only recommend products we have independently reviewed.