Review
The ACiQ 2-ton horizontal furnace-AC system represents solid mid-market equipment for contractors prioritizing efficient heating and straightforward installation. Goodman's established manufacturing presence and ACiQ's competitive pricing structure this at $2666 for an 80,000 BTU furnace paired with 24,000 BTU cooling capacity. The horizontal configuration fills a specific market need for attics, basements, and crawl spaces where traditional vertical orientation won't fit. This combo system avoids separate equipment sourcing while maintaining reasonable cost control.
Performance numbers confirm this system targets efficiency-conscious buyers. The 96% AFUE rating puts heating performance in the high-efficiency category, translating to measurable gas bill reductions against 80-88% units. The 14 SEER2 cooling rating performs adequately but not exceptionally, matching budget-tier AC equipment. Variable-speed ECM blower technology means the motor runs at optimal speeds from 0-1200 CFM, reducing energy waste during partial-load conditions. Two-stage burner operation allows the furnace to run at reduced capacity during mild winter weather, further improving seasonal efficiency.
Pros & Cons
Pros
- 96% AFUE heating efficiency significantly reduces natural gas or propane consumption compared to 80-90% units
- Variable-speed ECM blower motor adjusts airflow between 0-1200 CFM, improving comfort and reducing short-cycling
- 14 SEER2 cooling rating meets mid-tier efficiency standards with R454B refrigerant
- Two-stage burner allows precise heating modulation for consistent temperature control
- Plastic PVC exhaust venting simplifies installation in many retrofit scenarios
- 10-year parts warranty with online registration provides reasonable protection for the price point
Cons
- 3-ton tonnage listed while marketed as 2-ton creates spec confusion and potential oversizing issues
- 71 dB noise level runs louder than premium models, noticeable in quiet homes
- Single-stage condenser cannot modulate cooling capacity, limiting efficiency in mild weather
- No Energy Star certification signals this misses top-tier efficiency programs some utilities offer rebates for
Who Should Buy
Best For
Contractors doing spec'd replacements in homes with horizontal ductwork runs and homeowners seeking cost-effective heating upgrades without premium pricing. This system makes sense for properties where the existing layout already dictates horizontal configuration and 96% AFUE savings justify the $2666 investment.
Consider Alternatives If
Buyers in extremely quiet residential areas should consider quieter models, and those seeking maximum cooling efficiency in hot climates should look for two-stage condenser systems with 15+ SEER2 ratings.
Installation
This unit requires 208/230V single-phase 60Hz power service, demanding 14.3 to 25-amp breaker sizing. The plastic PVC exhaust flue simplifies venting versus aluminum pipe. Horizontal mounting dimensions measure 21.125 inches tall by 17.5 inches wide by 26 inches deep, fitting many attic and utility room configurations. Refrigerant lines arrive pre-configured with 3/8-inch liquid and 3/4-inch suction connections rated for 50-foot maximum line length.
Warranty & Reliability
The 10-year parts warranty activates only with online registration, requiring homeowners to document purchase within a specified window. This covers compressor, heat exchanger, and blower assembly defects but typically excludes wear items and labor costs. Standard Goodman coverage applies to evaporator coil components. Ten years provides reasonable protection at this price tier, though it trails premium manufacturers offering 12-15 year terms.
Specifications
| SKU | ACIQ-24-EHPD-UPG |
| Brand/Manufacturer | ACiQ |
| Cooling BTU | 24,000 |
| Heating BTU | 80,000 |
| Refrigerant | R454B |
| Electrical | 208 / 230 V. 1 Phase 60 Hz |
| Warranty | 10 Years with Online Registration |
| Decibel Level (dBA) | 71 |
| Weight (in lbs) | 120.000000 |
| Feature | Spec |
| AHRI Certificate Number | 7368834 |
| Airflow Direction | Upflow/Horizontal |
| Exhaust Flue Requirement | Plastic / PVC |
| Product Features | Rebate Available |
| Furnace Efficiency / AFUE | 96% |
| Blower Motor | Variable Speed - ECM |
| Maximum CFM | 1200 |
| Configuration | Horizontal |
| Energy Star | No |
| Burner Stages | Two |
| Fuel Type | Propane, Natural Gas |
| Height | 21.125" |
| Width | 17.5" |
| Depth | 26" |
| Resources | CHPF Installation Manual CHPF Specifications Sheet Goodman Evaporator Coil Warranty You will need Adobe® Acrobat® Reader to view PDF documents. |
| Safety Information | PROPOSITION 65 WARNING This product and many products on our site may contain a chemical know to the state of California to cause cancer or birth defects or other reproductive harm. For more information about Proposition 65 please Click Here. |
| SEER1 (Efficiency) | 14 |
| Condenser Stages | Single Stage |
| Compressor Type | Rotary |
| Liquid Valve Size | 3/8" |
| Suction Valve Size | 3/4" |
| Max Breaker Size | 25 amps |
| Min. Breaker Size | 14.3 amps |
| Tonnage | 3 Ton |
| Liquid Line | 3/8" |
| Suction Line | 3/4" |
| Style | A-Coil |
| Suction Line Insulation Thickness | 3/4" |
| Length | 50 feet |
Frequently Asked Questions
Affiliate disclosure: IndustrialRank earns a commission on qualifying purchases at no extra cost to you. We only recommend products we have independently reviewed.