Review
The ACiQ 2-ton combination furnace and air conditioner arrives as a sensible middle-ground option in the crowded HVAC replacement market. Positioned at the entry level for efficiency seekers, this upflow unit targets contractors and homeowners upgrading from aging equipment without breaking budgets on premium brands. The compact 21-by-21-by-22-inch profile solves real installation headaches in basements and closets where standard 24-inch boxes won't fit.
Performance numbers tell a practical story: the furnace hits 96% AFUE with two-stage burners capable of modulating heat output, while the AC section delivers 80,000 BTU heating and 24,000 BTU cooling at 14 SEER1 efficiency. The variable-speed ECM blower reaches 1600 CFM maximum and adjusts speed to match actual demand, reducing energy waste during part-load operation. These specifications align well with 2-ton systems serving 1200-1600 square foot homes in moderate climates.
Pros & Cons
Pros
- 96% AFUE furnace efficiency minimizes heating fuel waste and reduces monthly winter bills by 10-15% versus 80% AFUE systems
- Variable-speed ECM blower motor optimizes airflow at 1600 CFM maximum and reduces runtime energy consumption
- Compact dimensions at 22 inches tall, 21 wide, and 21 deep fit tight equipment closets and basements where standard units won't
- Dual-fuel capability handles both natural gas and propane, useful for properties without gas service
- Two-stage burner modulates heating output for improved comfort and efficiency during partial-load conditions
- PVC/plastic flue piping simplifies venting through existing plastic ductwork or condensing exhaust lines
Cons
- 14 SEER1 cooling rating lags premium competitors at 16+ SEER2, meaning higher AC operating costs in hot climates
- Single-stage compressor delivers fixed cooling output rather than variable capacity, reducing part-load efficiency
- No Energy Star certification despite decent efficiency numbers, which disqualifies buyers seeking tax credits or rebates
- 71 dB noise level at full capacity registers louder than variable-capacity alternatives, potentially noticeable in quiet settings
Who Should Buy
Best For
This system suits budget-conscious homeowners and light commercial properties replacing 15-25 year old equipment who prioritize heating efficiency over cooling performance. It's particularly valuable in northern regions, rental properties, and retrofit applications where furnace space is constrained.
Consider Alternatives If
Buyers in hot climates who run AC six months annually should look at higher SEER units, and anyone seeking Energy Star rebates or tax incentives will find this unit ineligible.
Installation
Installation requires 208/230 volt, 1-phase, 60 Hz power with breaker sizing between 14.3 and 25 amps. The unit accepts plastic PVC exhaust venting, eliminating expensive metal flue modifications. Liquid and suction lines use standard 3/8-inch and 3/4-inch copper with 50-foot maximum length and 3/4-inch insulation thickness, supporting typical retrofit jobs without major ductwork redesign.
Warranty & Reliability
ACiQ includes a 10-year comprehensive warranty activated through online registration, covering parts and compressor defects. Registration is required to unlock full coverage, and Goodman's evaporator coil carries matching 10-year protection. This warranty duration matches industry standards for mid-tier equipment but lacks the extended terms offered by premium manufacturers.
Specifications
| SKU | ACIQ-24-EHPD-UPG |
| Brand/Manufacturer | ACiQ |
| Cooling BTU | 24,000 |
| Heating BTU | 80,000 |
| Refrigerant | R454B |
| Electrical | 208 / 230 V. 1 Phase 60 Hz |
| Warranty | 10 Years with Online Registration |
| Decibel Level (dBA) | 71 |
| Weight (in lbs) | 120.000000 |
| Feature | Spec |
| AHRI Certificate Number | 7368835 |
| Airflow Direction | Upflow/Horizontal |
| Exhaust Flue Requirement | Plastic / PVC |
| Furnace Efficiency / AFUE | 96% |
| Blower Motor | Variable Speed - ECM |
| Maximum CFM | 1600 |
| Configuration | Upflow / Downflow |
| Flue Location | Right |
| Energy Star | No |
| Burner Stages | Two |
| Fuel Type | Propane, Natural Gas |
| Height | 22" |
| Width | 21" |
| Depth | 21" |
| Resources | CAPF Installation Manual CAPF Specifications Sheet Goodman Evaporator Coil Warranty You will need Adobe® Acrobat® Reader to view PDF documents. |
| Safety Information | PROPOSITION 65 WARNING This product and many products on our site may contain a chemical know to the state of California to cause cancer or birth defects or other reproductive harm. For more information about Proposition 65 please Click Here. |
| SEER1 (Efficiency) | 14 |
| Condenser Stages | Single Stage |
| Compressor Type | Rotary |
| Liquid Valve Size | 3/8" |
| Suction Valve Size | 3/4" |
| Max Breaker Size | 25 amps |
| Min. Breaker Size | 14.3 amps |
| Tonnage | 3 Ton |
| Liquid Line | 3/8" |
| Suction Line | 3/4" |
| Style | A-Coil |
| Suction Line Insulation Thickness | 3/4" |
| Length | 50 feet |
Frequently Asked Questions
Affiliate disclosure: IndustrialRank earns a commission on qualifying purchases at no extra cost to you. We only recommend products we have independently reviewed.