Review
The Goodman 2-ton combo furnace and air conditioning system represents the practical middle ground in residential HVAC. With 80,000 BTU heating capacity and 24,000 BTU cooling, this upflow unit handles modest homes efficiently without premium pricing. It's a direct replacement for countless older dual systems still operating in the 80-90% efficiency range, making it an attractive upgrade path for cost-conscious homeowners.
Performance metrics show genuine efficiency gains. The furnace delivers 96% AFUE, meaning 96 cents of every heating dollar converts to usable heat, while the air conditioner reaches 14 SEER with R454B refrigerant. The two-stage burner modulates between high and low fire for comfort, and the multi-speed ECM blower runs at just 71 decibels. Maximum airflow reaches 1,200 CFM, adequate for homes up to 1,600 square feet in most climates.
Pros & Cons
Pros
- 96% AFUE furnace efficiency reduces winter heating bills significantly compared to 80-90% units
- 14 SEER air conditioner meets ENERGY STAR standards with R454B low-GWP refrigerant
- Two-stage burner and multi-speed ECM blower motor provide quieter operation at 71 dB
- Lifetime heat exchanger warranty plus 10-year parts and unit coverage with registration
- Compact A-coil design fits upflow or horizontal configurations in tight spaces
Cons
- Single-stage cooling compressor cannot modulate capacity, leading to short cycling in mild weather
- 115V electrical requirement limits installation flexibility in some older homes
- Plastic PVC exhaust flue requirement adds installation costs for homes needing new ductwork
Who Should Buy
Best For
Homeowners in moderate climates replacing 15-20 year old furnace-AC combos who prioritize heating efficiency and want to stay under $3,000 total system cost. This works best for 1,200-1,500 square foot homes where 2-ton capacity matches actual heating and cooling loads.
Consider Alternatives If
Buyers in extreme climates needing 3+ ton capacity or those wanting variable-speed cooling should look at higher SEER2 models with multi-stage compressors.
Installation
Installation requires 115V single-phase power with a 14.3 to 25 amp breaker, making it compatible with standard residential service panels. The compact footprint measures 34.5 inches tall and 28.75 inches deep, fitting basement corners and closets. PVC exhaust venting simplifies installation compared to metal flues, though condensate drainage to floor drains or pumps is necessary given the 96% efficiency.
Warranty & Reliability
Goodman backs this unit with lifetime coverage on the heat exchanger, addressing the costliest component. Ten-year full replacement and parts warranties apply with online registration, protecting against major failures through the warranty period. This combination matches industry standards for mid-tier equipment.
Specifications
| SKU | ACIQ-24-EHPD-UPG |
| Brand/Manufacturer | ACiQ |
| Cooling BTU | 24,000 |
| Heating BTU | 80,000 |
| Refrigerant | R454B |
| Electrical | 115 V. 1 Phase 60 Hz |
| Warranty | Lifetime Heat Exchanger, 10 Years Unit Replacement, and 10 Years Parts with Online Registration |
| Decibel Level (dBA) | 71 |
| Weight (in lbs) | 120.000000 |
| Feature | Spec |
| Energy Star | Yes |
| SEER1 (Efficiency) | 14 |
| Condenser Stages | Single Stage |
| Compressor Type | Rotary |
| Liquid Valve Size | 3/8" |
| Suction Valve Size | 3/4" |
| Max Breaker Size | 25 amps |
| Min. Breaker Size | 14.3 amps |
| Tonnage | 3 Ton |
| Height | 34.5" |
| Width | 17.5" |
| Depth | 28.75" |
| Resources | GMEC96 Installation Manual GMEC96 Specifications Sheet GMEC96 Owner's Manual GMEC96 Service Manual GMEC96 Replacement Parts Manual GMEC96 Brochure Goodman Furnace Warranty You will need Adobe® Acrobat® Reader to view PDF documents. |
| Safety Information | PROPOSITION 65 WARNING This product and many products on our site may contain a chemical know to the state of California to cause cancer or birth defects or other reproductive harm. For more information about Proposition 65 please Click Here. |
| Configuration | Upflow/Horizontal |
| Liquid Line | 3/8" |
| Suction Line | 3/4" |
| Style | A-Coil |
| Airflow Direction | Upflow/Horizontal |
| Exhaust Flue Requirement | Plastic / PVC |
| Furnace Efficiency / AFUE | 96% |
| Blower Motor | Multi-Speed - ECM |
| Maximum CFM | 1200 |
| Flue Location | Right |
| Burner Stages | Two |
| Fuel Type | Gas |
| Suction Line Insulation Thickness | 3/4" |
| Length | 50 feet |
Frequently Asked Questions
Affiliate disclosure: IndustrialRank earns a commission on qualifying purchases at no extra cost to you. We only recommend products we have independently reviewed.