Independent Review · Updated June 2026

2 Ton 14 SEER 96% AFUE 60,000 BTU Goodman Gas Furnace and Air Conditioner System - Upflow

Energy Star 96% AFUE furnace with 14 SEER cooling at a budget-friendly price point

8.2
IndustrialRank Score
Efficiency
8.5
Reliability
7.8
Value
8.0
Installation
8.5
Warranty
8.0
2 Ton 14 SEER 96% AFUE 60,000 BTU Goodman Gas Furnace and Air Conditioner System - Upflow
Current Price
$643
Check Price at HVACDirect → Shop Now at HVACDirect
Authorized dealer · Full manufacturer warranty
// Bottom Line
This 2-ton Goodman system delivers solid efficiency with its 96% AFUE heating and 14 SEER cooling for homeowners seeking reliable performance without premium pricing. Best suited for budget-conscious contractors and homeowners upgrading older systems in moderate climates where 2-ton capacity meets heating and cooling demands.

Review

The Goodman 2-ton gas furnace and air conditioner system strikes a practical balance in today's HVAC market. At $643, it undercuts many competitor offerings while delivering Energy Star certification and dual-fuel capability for natural gas or propane. This upflow configuration suits standard basement or utility closet installations common in residential retrofit work. The system targets budget-conscious buyers who want proven Goodman reliability without paying for variable-capacity compressors or advanced smart features.

Performance numbers tell the real story here. The furnace achieves 96% AFUE efficiency with two-stage burners that modulate heat output based on demand, reducing energy waste during mild weather. On the cooling side, the 14 SEER1 rating with R454B refrigerant meets modern standards, delivering 24,000 BTU cooling capacity. The variable-speed ECM blower motor handles airflow up to 1,200 CFM, adapting output to different ductwork configurations. For homeowners comparing heating bills, the 96% AFUE means substantially lower waste than older 80-85% furnaces, typically recovering equipment costs within 5-7 years.

Pros & Cons

Pros

  • 96% AFUE furnace efficiency reduces heating costs year-round compared to 80-90% models
  • 14 SEER cooling rating meets Energy Star standards and qualifies for utility rebates in many regions
  • Variable-speed ECM blower motor allows flexible operation and improved humidity control
  • Two-stage burner provides modulating heat output for better comfort and efficiency
  • Upflow/downflow configuration offers installation flexibility in basements or closets
  • R454B refrigerant meets current EPA environmental standards without future phase-out risk

Cons

  • 2-ton capacity may be undersized for homes requiring 2.5+ tons in hot climates
  • Single-stage compressor lacks variable cooling capacity of more premium units
  • 71 dB noise level is audible during operation, especially for noise-sensitive homes

Who Should Buy

Best For

Contractors and homeowners replacing 10+ year old systems in moderate climates who prioritize efficiency gains and utility savings over advanced features. Ideal for tight budgets where a reliable, EPA-compliant system matters more than premium warranties or variable-capacity compressors.

Consider Alternatives If

Anyone with a home requiring 3+ tons of cooling capacity should skip this model and look for true 3-ton or 4-ton systems instead.

2 Ton 14 SEER 96% AFUE 60,000 BTU Goodman Gas Furn
$643
Buy at HVACDirect →

Installation

Installation requires standard ductwork connections with 3/8-inch and 3/4-inch line sizing for refrigerant circulation. The A-coil design works in upflow or downflow positions, accommodating most basement layouts. Electrical setup needs 115V single-phase 60Hz service with breaker sizing between 14.3 and 25 amps, straightforward for existing homes. PVC or plastic exhaust venting is required. Most experienced HVAC contractors complete installation in 4-6 hours including system testing.

Warranty & Reliability

Goodman provides 10 years of parts coverage with online registration, a solid baseline warranty for this price range. Registration is mandatory to activate the full term, so document serial numbers immediately after installation. Coverage includes compressor failure and furnace heat exchanger defects, the most expensive potential failures. This warranty period aligns with average system lifespan expectations, offering reasonable protection against premature component failure.

Specifications

SKUACIQ-24-EHPD-UPG
Brand/ManufacturerACiQ
Cooling BTU24,000
Heating BTU60,000
RefrigerantR454B
Electrical115 V. 1 Phase 60 Hz
Warranty10 Years with Online Registration
Decibel Level (dBA)71
Weight (in lbs)120.000000
FeatureSpec
Energy StarYes
SEER1 (Efficiency)14
Condenser StagesSingle Stage
Compressor TypeRotary
Liquid Valve Size3/8"
Suction Valve Size3/4"
Max Breaker Size25 amps
Min. Breaker Size14.3 amps
Tonnage3 Ton
Height30"
Width17.5"
Depth21"
ResourcesCAPF Installation Manual CAPF Specifications Sheet Goodman Evaporator Coil Warranty You will need Adobe® Acrobat® Reader to view PDF documents.
Safety InformationPROPOSITION 65 WARNING This product and many products on our site may contain a chemical know to the state of California to cause cancer or birth defects or other reproductive harm. For more information about Proposition 65 please Click Here.
AHRI Certificate Number7368833
Airflow DirectionUpflow/Horizontal
Exhaust Flue RequirementPlastic / PVC
Product FeaturesRebate Available
Furnace Efficiency / AFUE96%
Blower MotorVariable Speed - ECM
Maximum CFM1200
ConfigurationUpflow / Downflow
Burner StagesTwo
Fuel TypePropane, Natural Gas
Liquid Line3/8"
Suction Line3/4"
StyleA-Coil
Suction Line Insulation Thickness3/4"
Length50 feet

Frequently Asked Questions

Is 2 tons enough cooling capacity for my home? +
The 2-ton system delivers 24,000 BTU cooling. Use the rule of thumb: 400-500 BTU per square foot for average insulation. This unit handles roughly 1,000-1,200 square feet. If your home is larger or poorly insulated, you'll need 2.5 or 3 tons to maintain comfort during peak summer heat.
What electrical work is needed before installation? +
Verify 115V single-phase 60Hz service availability near the furnace location. Install a 20-25 amp circuit breaker if upgrading from an older system. Most homes already have suitable power. An electrician can verify in 30 minutes, costing $75-150 typically.
How much will this system reduce my heating and cooling bills? +
The 96% AFUE furnace cuts heating costs 10-15% versus 85% AFUE models. The 14 SEER cooling saves 15-20% compared to 10 SEER units. Regional energy costs vary, but expect $200-400 annual savings in moderate climates. Payback typically occurs within 5-7 years.
How does this compare to higher-SEER systems like 16 or 18 SEER? +
Higher SEER models use variable-capacity compressors and advanced controls, costing 30-50% more. Real-world savings over 14 SEER are modest in moderate climates, roughly 5-8% annually. This system makes sense when budget constraints matter more than chasing the highest efficiency rating.
Do I need to register the warranty, and what happens if I don't? +
Yes, online registration is required within 30 days. Without it, you lose the extended warranty and receive only 1 year coverage. Registration takes 5 minutes online with your serial number and purchase date.

Affiliate disclosure: IndustrialRank earns a commission on qualifying purchases at no extra cost to you. We only recommend products we have independently reviewed.