Review
The ACiQ ACIQ-24-EHPD-UPG represents a practical choice in the mid-tier furnace-conditioner market. This 2-ton system pairs an 80,000 BTU furnace with a 24,000 BTU condenser, targeting moderate residential applications where balanced heating and cooling matter. ACiQ positions itself as a value alternative to Goodman, Daikin, and Lennox while maintaining solid AHRI certification (7424265) for contractor credibility. The upflow configuration suits typical basement and utility closet installations.
Performance numbers tell the real story. The 97% AFUE furnace operates with a modulating burner that adjusts from 40-100% capacity, avoiding the efficiency loss and comfort issues inherent in single-stage burners. The 14 SEER cooling rating is respectable without premium pricing. The variable-speed ECM blower handles up to 1200 CFM, adapting airflow to actual heating and cooling demand rather than running full-blast constantly. These features combine to reduce energy waste during both winter and shoulder seasons.
Pros & Cons
Pros
- 97% AFUE furnace converts nearly all fuel to heat, reducing winter utility bills significantly versus standard 80-90% units
- Modulating burner adjusts output between 40-100% capacity, eliminating temperature swings and improving comfort consistency
- Variable-speed ECM blower runs at precise speeds for quieter operation at 71 dB and better air distribution
- 14 SEER cooling efficiency meets ENERGY STAR adjacency without premium costs in moderate climates
- PVC exhaust flue requirement simplifies installation in many homes and reduces corrosion concerns versus metal flues
- 10-year parts warranty with online registration provides solid protection for residential applications
Cons
- Not ENERGY STAR certified, so no federal tax credits available in some jurisdictions
- Single-stage condenser limits cooling efficiency gains compared to dual-stage competitors in hot climates
- 3-ton outdoor unit mismatches 2-ton furnace rating, creating potential sizing inconsistencies that installers must address
- 208/230V single-phase power requirement limits compatibility in older homes with only 120V service
Who Should Buy
Best For
Contractors installing systems in homes where natural gas or propane is available and moderate climate heating is the priority. Homeowners replacing aging furnaces who value heating efficiency and quiet operation over cutting-edge cooling performance.
Consider Alternatives If
Those in hot climates needing aggressive cooling capacity or seeking ENERGY STAR certification for federal tax incentives should compare dual-stage models.
Installation
Installation aligns well with standard practices. The unit requires PVC or plastic exhaust flue, which most contractors handle routinely and costs less than metal alternatives. Dimensions of 26 inches tall, 17.5 inches wide, and 21 inches deep fit standard equipment spaces. You'll need 208/230V single-phase 60 Hz power with a 14.3 to 25 amp breaker. Refrigerant lines specify 3/8 inch liquid and 3/4 inch suction with 3/4 inch insulation thickness, all standard sizes. Professional installation remains mandatory.
Warranty & Reliability
The 10-year parts warranty kicks in upon online registration, a standard requirement across most manufacturers now. This covers compressor, heat exchanger, and major components, though it does not extend labor costs. Compare against competitors offering lifetime compressor warranties. Registration takes minutes and is crucial, so confirm your installer completes this step before leaving the job.
Specifications
| SKU | ACIQ-24-EHPD-UPG |
| Brand/Manufacturer | ACiQ |
| Cooling BTU | 24,000 |
| Heating BTU | 80,000 |
| Refrigerant | R454B |
| Electrical | 208 / 230 V. 1 Phase 60 Hz |
| Warranty | 10 Years with Online Registration |
| Decibel Level (dBA) | 71 |
| Weight (in lbs) | 120.000000 |
| Feature | Spec |
| AHRI Certificate Number | 7424265 |
| Airflow Direction | Upflow/Horizontal |
| Exhaust Flue Requirement | Plastic / PVC |
| Product Features | Rebate Available |
| Furnace Efficiency / AFUE | 97% |
| Blower Motor | Variable Speed - ECM |
| Maximum CFM | 1200 |
| Configuration | Upflow / Downflow |
| Energy Star | No |
| Burner Stages | Modulating |
| Fuel Type | Propane, Natural Gas |
| Height | 26" |
| Width | 17.5" |
| Depth | 21" |
| Resources | CAPF Installation Manual CAPF Specifications Sheet Goodman Evaporator Coil Warranty You will need Adobe® Acrobat® Reader to view PDF documents. |
| Safety Information | PROPOSITION 65 WARNING This product and many products on our site may contain a chemical know to the state of California to cause cancer or birth defects or other reproductive harm. For more information about Proposition 65 please Click Here. |
| SEER1 (Efficiency) | 14 |
| Condenser Stages | Single Stage |
| Compressor Type | Rotary |
| Liquid Valve Size | 3/8" |
| Suction Valve Size | 3/4" |
| Max Breaker Size | 25 amps |
| Min. Breaker Size | 14.3 amps |
| Tonnage | 3 Ton |
| Liquid Line | 3/8" |
| Suction Line | 3/4" |
| Style | A-Coil |
| Suction Line Insulation Thickness | 3/4" |
| Length | 50 feet |
Frequently Asked Questions
Affiliate disclosure: IndustrialRank earns a commission on qualifying purchases at no extra cost to you. We only recommend products we have independently reviewed.