Review
Goodman's 2-ton gas furnace and air conditioner combo represents the value tier of HVAC systems. At $2024, it directly competes with builder-grade installations and replacement systems for homes where budget drives the buying decision. The unit carries Energy Star certification and comes with a 10-year warranty through Online Supply, positioning it as a practical choice for contractors and homeowners unwilling to spend $3500 or more on premium equipment.
Performance metrics show an 80% AFUE furnace paired with a single-stage air conditioner rated at 23,600 cooling BTU. The 60,000 BTU heating capacity addresses most two-ton load calculations in moderate climates. A variable-speed blower motor and two-stage burner distinguish this from rock-bottom models, allowing the furnace to modulate output rather than cycling on-off constantly. The scroll compressor and R410A refrigerant represent proven technology, though single-stage cooling means the unit runs at full capacity continuously rather than matching load intelligently.
Pros & Cons
Pros
- Energy Star certified with 80% AFUE furnace efficiency, meeting most regional requirements
- 2-ton capacity with 60,000 BTU heating and 23,600 BTU cooling handles typical single-family homes
- Variable-speed blower motor with 1600 CFM maximum improves comfort and reduces runtime cycling
- Two-stage burner allows modulated heating for better efficiency and quieter operation
- Scroll compressor design is proven reliable and widely serviced by contractors
Cons
- 80% AFUE is dated by 2024 standards; newer 95%+ AFUE systems recoup cost difference within 5-7 years
- Single-stage air conditioning with 71.5 dB noise level won't satisfy comfort-first buyers
- Spec confusion: listed as both 2-ton and 2.5-ton, requiring verification before ordering
Who Should Buy
Best For
Homeowners in warm or moderate climates replacing 15+ year old systems who prioritize low upfront cost over long-term efficiency savings. Contractors installing in rental properties or budget-tier new builds will appreciate the straightforward two-stage design and standard R410A compatibility.
Consider Alternatives If
Anyone in cold climates, homes with high heating demands, or buyers planning to stay 10+ years should invest in 90%+ AFUE systems that deliver better ROI despite higher initial cost.
Installation
This upflow/horizontal configuration fits most basement or attic installations. Requires metal exhaust flue, 3/8-inch liquid line and 3/4-inch suction line connections, plus 120V single-phase 60Hz power with 12.4 to 20-amp breaker capacity. Standard HVAC tools and refrigerant certification suffice. Pre-installed suction line insulation (3/4-inch thickness, 50-foot length) simplifies field assembly and reduces installation labor compared to bare-line systems.
Warranty & Reliability
Ten-year parts warranty requires online registration and covers manufacturing defects and compressor failure. This matches industry standard for mid-tier equipment but trails premium 10-year compressor-only plus limited lifetime heat exchanger coverage offered by higher-end brands. Covers the scroll compressor, motors, and coil components, though homeowners pay labor costs for repairs after the first year.
Specifications
| SKU | LS38343850 |
| Brand/Manufacturer | Online Supply |
| Cooling BTU | 23,600 |
| Heating BTU | 60,000 |
| Refrigerant | R410A or R22 |
| Electrical | 120 V. 1 Phase 60 Hz |
| Warranty | 10 Years with Online Registration |
| Decibel Level (dBA) | 71.5 |
| Weight (in lbs) | 22.000000 |
| Feature | Spec |
| Replaces | GSX16S241 |
| Energy Star | Yes |
| SEER1 (Efficiency) | 16 |
| Condenser Stages | Single Stage |
| Compressor Type | Scroll |
| Liquid Valve Size | 3/8" |
| Suction Valve Size | 3/4" |
| Max Breaker Size | 20 amps |
| Min. Breaker Size | 12.4 amps |
| Tonnage | 2.5 Ton |
| Height | 22" |
| Width | 17.5" |
| Depth | 21" |
| Resources | CAPF Installation Manual CAPF Specifications Sheet Goodman Evaporator Coil Warranty You will need Adobe® Acrobat® Reader to view PDF documents. |
| Safety Information | PROPOSITION 65 WARNING This product and many products on our site may contain a chemical know to the state of California to cause cancer or birth defects or other reproductive harm. For more information about Proposition 65 please Click Here. |
| AHRI Certificate Number | 204633301 |
| Airflow Direction | Upflow/Horizontal |
| Exhaust Flue Requirement | Metal |
| Furnace Efficiency / AFUE | 80% |
| Blower Motor | Variable Speed |
| Maximum CFM | 1600 |
| Configuration | Upflow / Downflow |
| Burner Stages | Two |
| Fuel Type | Propane, Natural Gas |
| Liquid Line | 3/8" |
| Suction Line | 3/4" |
| Style | A-Coil |
| Suction Line Insulation Thickness | 3/4" |
| Length | 50 feet |
Frequently Asked Questions
Affiliate disclosure: IndustrialRank earns a commission on qualifying purchases at no extra cost to you. We only recommend products we have independently reviewed.