Review
The Goodman 2-ton gas furnace and air conditioner system represents the solid middle ground of residential HVAC equipment. This horizontal A-coil configuration addresses real contractor pain points: flexible installation in tight spaces, straightforward service access, and proven Goodman reliability at reasonable cost. It's engineered for homes where efficiency improvements matter but cutting-edge performance isn't the priority.
The heating side delivers 60,000 BTU across two burner stages, reaching 96% AFUE efficiency. Cooling produces 23,600 BTU at 15 SEER with a scroll compressor running at 71.5 dB. The variable-speed ECM blower reaches 1200 CFM maximum, scaling output to match your home's actual heating and cooling load rather than cycling on and off at full capacity. This modulation approach reduces temperature swings and keeps utility costs down.
Pros & Cons
Pros
- 96% AFUE furnace efficiency means 96 cents of every dollar spent on fuel converts to heat, well above the 80-85% baseline
- Variable-speed ECM blower motor runs only as hard as needed, reducing runtime and electricity costs compared to single-speed models
- Two-stage burner provides modulating heat output, reducing temperature swings and improving comfort during mild weather
- Lifetime warranty on heat exchanger protects against the most expensive potential failure point
- Compact A-coil design fits tight spaces, and horizontal configuration handles both upflow and horizontal ductwork
- Scroll compressor runs quieter at 71.5 dB and more reliably than reciprocating types
Cons
- 15 SEER rating lags behind modern 18-20 SEER units, so cooling efficiency gains won't match newer technology
- Single-stage AC compressor means it runs full-speed whenever cooling is needed, less efficient than variable-capacity designs
- Specs show discrepancy: product title claims 2 tons but specs list 3 tons, creating confusion about actual capacity
- R410A and R22 refrigerant compatibility limits future serviceability as R22 becomes harder to source
Who Should Buy
Best For
Homeowners with working ductwork who need reliable heating and cooling without cutting-edge efficiency should seriously consider this unit. It's ideal for those replacing 10+ year old equipment where the step up to 96% AFUE and 15 SEER delivers meaningful utility savings.
Consider Alternatives If
Skip this if you prioritize maximum efficiency and plan to stay in your home 15+ years, since newer 20+ SEER models will deliver faster payback on the higher upfront cost.
Installation
The system runs on standard 115V single-phase 60 Hz power, requiring a 12.4 to 20 amp breaker. Suction line uses 3/4 inch copper with 3/4 inch insulation up to 50 feet, while liquid line runs 3/8 inch. Exhaust venting requires plastic or PVC flue material. Horizontal configuration works with existing upflow ductwork, simplifying retrofit installations.
Warranty & Reliability
Coverage includes a transferable lifetime warranty on the heat exchanger and 10 years parts protection with online registration. The heat exchanger warranty protects against the costliest failure point, while 10 years parts coverage keeps repair costs reasonable through the system's typical service life.
Specifications
| SKU | LS38343850 |
| Brand/Manufacturer | Online Supply |
| Cooling BTU | 23,600 |
| Heating BTU | 60,000 |
| Refrigerant | R410A or R22 |
| Electrical | 115 V. 1 Phase 60 Hz |
| Warranty | Lifetime Heat Exchanger and 10 Years Parts with Online Registration |
| Decibel Level (dBA) | 71.5 |
| Weight (in lbs) | 22.000000 |
| Feature | Spec |
| Replaces | GSX16S241 |
| Energy Star | Yes |
| SEER1 (Efficiency) | 16 |
| Condenser Stages | Single Stage |
| Compressor Type | Scroll |
| Liquid Valve Size | 3/8" |
| Suction Valve Size | 3/4" |
| Max Breaker Size | 20 amps |
| Min. Breaker Size | 12.4 amps |
| Tonnage | 3 Ton |
| Height | 34.5" |
| Width | 17.5" |
| Depth | 28.75" |
| Resources | Goodman Brochure Goodman Install Instructions Goodman Parts Manual Goodman Service Manual Goodman Specifications Goodman Technical Information Goodman User Information Goodman Warranty You will need Adobe® Acrobat® Reader to view PDF documents. |
| Safety Information | PROPOSITION 65 WARNING This product and many products on our site may contain a chemical know to the state of California to cause cancer or birth defects or other reproductive harm. For more information about Proposition 65 please Click Here. |
| Configuration | Upflow/Horizontal |
| Liquid Line | 3/8" |
| Suction Line | 3/4" |
| Style | A-Coil |
| AHRI Certificate Number | 7368833 |
| Airflow Direction | Upflow/Horizontal |
| Exhaust Flue Requirement | Plastic / PVC |
| Product Features | Rebate Available |
| Furnace Efficiency / AFUE | 96% |
| Blower Motor | Variable Speed - ECM |
| Maximum CFM | 1200 |
| Burner Stages | Two |
| Fuel Type | Propane, Natural Gas |
| Suction Line Insulation Thickness | 3/4" |
| Length | 50 feet |
Frequently Asked Questions
Affiliate disclosure: IndustrialRank earns a commission on qualifying purchases at no extra cost to you. We only recommend products we have independently reviewed.