Independent Review · Updated June 2026

2 Ton 15 SEER 96% AFUE 60,000 BTU Goodman Gas Furnace and Air Conditioner System - Upflow

96% AFUE furnace paired with 16 SEER2 AC delivers reliable two-stage efficiency.

8.2
IndustrialRank Score
Efficiency
8.5
Reliability
7.8
Value
8.0
Installation
8.5
Warranty
8.0
2 Ton 15 SEER 96% AFUE 60,000 BTU Goodman Gas Furnace and Air Conditioner System - Upflow
Current Price
$0
Check Price at HVACDirect → Shop Now at HVACDirect
Authorized dealer · Full manufacturer warranty
// Bottom Line
This Goodman system works best for homeowners seeking solid heating and cooling efficiency without premium pricing. The 96% AFUE furnace and 16 SEER2 condenser make it ideal for northern climates where gas heat matters, and the two-stage design cuts noise and energy waste.

Review

The Goodman GMVC960603BN is a two-stage combination system pairing a 60,000 BTU gas furnace with a 24,000 BTU air conditioner in upflow A-coil configuration. This SKU represents the bread-and-butter of the residential HVAC market, targeting homeowners who need both heating and cooling without stepping into premium efficiency tiers. Goodman's reputation for straightforward engineering and contractor-friendly support makes this unit common on job sites across the country.

Performance metrics show a 96% AFUE furnace with two-stage burners and a 16 SEER2 condenser unit using R410A refrigerant with scroll compressor. The variable speed ECM blower delivers up to 1200 CFM and modulates to match heating or cooling demand. Operating noise registers at 71 decibels, reasonable for a two-stage system. Electrical draw requires a 15.7 to 20 amp breaker at 115V single phase, keeping installation straightforward for standard residential panels.

Pros & Cons

Pros

  • 96% AFUE gas furnace converts nearly all fuel to heat, reducing heating costs significantly in cold climates
  • 16 SEER2 rating on cooling side qualifies for ENERGY STAR and many utility rebates
  • Two-stage compressor and two-stage burners modulate output, lowering runtime and acoustic output to 71 dB
  • Variable speed ECM blower motor optimizes airflow between 0-1200 CFM based on demand
  • Lifetime heat exchanger warranty covers the most expensive failure point after online registration

Cons

  • Confusing spec sheet lists both 2 ton and 2.5 ton ratings, creating uncertainty about actual capacity
  • Cooling capacity of 24,000 BTU (2 ton) doesn't match the 60,000 BTU heating output well for balanced systems
  • Requires licensed technician installation, adding $500-1500+ to project cost depending on location

Who Should Buy

Best For

Homeowners in regions with significant heating seasons who want moderate efficiency gains and lower operating noise. Contractors looking for a dependable mid-range unit that qualifies for rebates and offers strong warranty coverage on the heat exchanger.

Consider Alternatives If

Buyers in primarily cooling climates should compare pure AC efficiency; those seeking premium SEER ratings above 18 should look elsewhere.

2 Ton 15 SEER 96% AFUE 60,000 BTU Goodman Gas Furn
$0
Buy at HVACDirect →

Installation

Professional installation is non-negotiable because this is a gas appliance. Technicians must route PVC venting correctly, verify proper gas line connections, and ensure sweat valve connections are airtight. Dimensions of 34.5 inches tall by 17.5 inches wide by 28.75 inches deep fit standard furnace closets. The upflow design suits basement or attic placement in most homes. Licensing requirements vary by jurisdiction.

Warranty & Reliability

Coverage includes a lifetime warranty on the heat exchanger (the furnace's core component) provided you register online, plus 10 years of parts coverage. The heat exchanger is where furnaces typically fail catastrophically, so this lifetime protection carries real value. Parts coverage spans compressor, blower motor, and controls for a decade. Labor costs fall on the homeowner after year one.

Specifications

SKUGMVC960603BN
Brand/ManufacturerGoodman
Cooling BTU24,000
Heating BTU60,000
RefrigerantR410A
Electrical115 V. 1 Phase 60 Hz
WarrantyLifetime Heat Exchanger and 10 Years Parts with Online Registration
Decibel Level (dBA)71
Weight (in lbs)114.000000
FeatureSpec
Energy StarYes
SEER1 (Efficiency)16
Condenser StagesTwo Stage
Compressor TypeScroll
Liquid Valve Size3/8"
Suction Valve Size3/4"
Max Breaker Size20 amps
Min. Breaker Size15.7 amps
Tonnage2.5 Ton
Valve TypeSweat
Height34.5"
Width17.5"
Depth28.75"
ResourcesGoodman Brochure Goodman Install Instructions Goodman Parts Manual Goodman Service Manual Goodman Specifications Goodman Technical Information Goodman User Information Goodman Warranty You will need Adobe® Acrobat® Reader to view PDF documents.
Safety InformationThis gas appliance requires a trained technician to install. Improperly connecting gas lines or improperly connecting a gas flue or venting may result in death. By purchasing this item, you are agreeing that you are using a trained technician to install this gas appliance. We will not be responsible for any injury or property damage arising from improper service or service procedures. Whoever installs or services this unit assumes responsibility for any personal injury or property damage which may result. Many jurisdictions require a license to install this equipment. PROPOSITION 65 WARNING This product and many products on our site may contain a chemical know to the state of California to cause cancer or birth defects or other reproductive harm. For more information about Proposition 65 please Click Here.
ConfigurationUpflow/Horizontal
Liquid Line3/8"
Suction Line3/4"
StyleA-Coil
AHRI Certificate Number7368833
Airflow DirectionUpflow/Horizontal
Exhaust Flue RequirementPlastic / PVC
Product FeaturesRebate Available
Furnace Efficiency / AFUE96%
Blower MotorVariable Speed - ECM
Maximum CFM1200

Frequently Asked Questions

Why does the spec sheet say both 2 ton and 2.5 ton? +
The condenser is rated at 2 tons (24,000 BTU cooling), but SKU classification lists 2.5 ton. This discrepancy likely reflects inventory or legacy naming. Verify cooling capacity is 24,000 BTU and heating is 60,000 BTU for your load calculations.
Can I install this myself to save money? +
No. Gas furnace installation requires a licensed technician in most jurisdictions. Improper venting or gas line connection risks carbon monoxide poisoning or explosion. Professional installation typically costs $800 to $2000 depending on location and ductwork complexity.
How much will this reduce my heating bills compared to older furnaces? +
A 96% AFUE furnace wastes only 4% of fuel versus 80% AFUE units that waste 20%. On $1200 annual heating costs, you'd save roughly $192 per year. Payback depends on upgrade cost and local gas prices, typically 5 to 7 years.
Is 16 SEER2 good enough, or should I buy a higher rating? +
16 SEER2 is solid for mid-range systems and qualifies for ENERGY STAR rebates. Higher ratings (18-22 SEER2) cost significantly more with modest annual cooling savings. This unit suits those balancing efficiency gains against upfront budget constraints.
What does the lifetime heat exchanger warranty actually cover? +
It covers defects in the furnace's primary heat exchanger after online registration at no cost for parts. Labor and service calls are not included. This protects against manufacturing flaws but not corrosion from poor maintenance or hard water.

Affiliate disclosure: IndustrialRank earns a commission on qualifying purchases at no extra cost to you. We only recommend products we have independently reviewed.