2 Ton 16 SEER 96% AFUE 60,000 BTU Goodman Gas Furnace and Air Conditioner System - Downflow Review 2026

// Bottom Line

This Goodman system is ideal for homeowners replacing older equipment in moderate climates where a 2-ton cooling capacity covers the load. At $2,466, you're getting respectable efficiency ratings without the premium price tag of higher-end brands, making it a practical choice for budget-conscious DIY installers or contractors managing tight margins.

Review

Goodman's 2-ton gas furnace and air conditioner combo lands squarely in the value segment of the HVAC market. At $2,466 for a complete system including both heating and cooling, this downflow unit targets budget-conscious homeowners and contractors managing cost-sensitive jobs. Goodman has built a reputation for reliable mid-market equipment, and this system carries a 10-year warranty, which signals confidence in component longevity. The Energy Star certification and dual-stage components hint at decent efficiency without flashy premium branding.

Where the specs get interesting is the efficiency pairing. The furnace delivers a solid 96% AFUE across 60,000 BTU of heating output, while the cooling side achieves 16 SEER with 24,000 BTU capacity. Two-stage burners and a scroll compressor with variable-speed ECM blower mean the system modulates output rather than cycling on and off constantly. The 71 dB noise level during cooling is middle-of-the-road, acceptable for most installations but noticeable during evening operation. Electrical requirements are modest at 115V single-phase with 15.7 to 20-amp breaker sizing.

Pros & Cons

Pros

96% AFUE furnace efficiency means lower heating bills and qualifies for some utility rebates
16 SEER rating delivers solid cooling efficiency, Energy Star certified
Two-stage compressor and burner stages provide better part-load performance and quieter operation
Variable-speed ECM blower motor adapts to demand, improving comfort and reducing energy waste
10-year warranty with online registration covers parts and labor on major components
Downflow/horizontal configuration works in tight attic or basement spaces

Cons

71 dB noise level is moderately loud for cooling mode, noticeable in quiet neighborhoods
Specs show 3-ton condenser paired with 2-ton cooling capacity, creating a sizing mismatch that reduces efficiency
Requires plastic/PVC exhaust flue, limiting installation flexibility in some older homes with masonry chimneys

Who Should Buy

Best For

Homeowners in mixed climates needing balanced heating and cooling without premium pricing, or HVAC contractors bidding budget-sensitive residential replacements. Best suited for homes where a 2-ton cooling load is adequate and upfront cost matters more than cutting-edge efficiency.

Consider Alternatives If

Those seeking high-efficiency cooling in hot climates should consider higher SEER ratings, and anyone in very cold regions would benefit from a system with larger heating capacity.

2 Ton 16 SEER 96% AFUE 60,000 BTU Goodman Gas Furn

$2466

Buy at HVACDirect →

Installation

This downflow configuration suits attics or basements where horizontal discharge works with your ductwork layout. You'll need plastic or PVC exhaust flue, which is standard but rules out homes requiring masonry chimney integration. The sweat valve connections use standard 3/8-inch liquid and 3/4-inch suction lines, so experienced installers move through setup quickly. Weight of 45 pounds and compact dimensions (26 by 17.5 by 21 inches) make handling manageable for two techs.

Warranty & Reliability

The 10-year parts warranty with online registration is solid for this price tier, though it requires proof of registration within 30 days of purchase. This covers the compressor, heat exchanger, and coil defects, which addresses the components most likely to fail. Labor warranty terms typically run 1 to 5 years depending on your installer, so clarify that before signing. Goodman's warranty is straightforward without hidden exclusions for proper maintenance.

Specifications

SKU	CAPF3636B6
Brand/Manufacturer	Goodman
Cooling BTU	24,000
Heating BTU	60,000
Refrigerant	R410A or R22
Electrical	115 V. 1 Phase 60 Hz
Warranty	10 Years with Online Registration
Decibel Level (dBA)	71
Weight (in lbs)	45.000000
Feature	Spec
Energy Star	Yes
SEER1 (Efficiency)	16
Condenser Stages	Two Stage
Compressor Type	Scroll
Liquid Valve Size	3/8"
Suction Valve Size	3/4"
Max Breaker Size	20 amps
Min. Breaker Size	15.7 amps
Tonnage	3 Ton
Valve Type	Sweat
Height	26"
Width	17.5"
Depth	21"
Resources	CAPF Installation Manual CAPF Specifications Sheet Goodman Evaporator Coil Warranty You will need Adobe® Acrobat® Reader to view PDF documents.
Safety Information	PROPOSITION 65 WARNING This product and many products on our site may contain a chemical know to the state of California to cause cancer or birth defects or other reproductive harm. For more information about Proposition 65 please Click Here.
AHRI Certificate Number	7368838
Airflow Direction	Downflow/Horizontal
Exhaust Flue Requirement	Plastic / PVC
Product Features	Rebate Available
Furnace Efficiency / AFUE	96%
Blower Motor	Variable Speed - ECM
Maximum CFM	1200
Configuration	Upflow / Downflow
Burner Stages	Two
Fuel Type	Propane, Natural Gas
Liquid Line	3/8"
Suction Line	3/4"
Style	A-Coil

Frequently Asked Questions

Is this truly a 2-ton system if the specs list 3-ton tonnage? +

The cooling capacity is 24,000 BTU, which equals 2 tons. The 3-ton designation appears to reference the condenser size, creating a slight oversizing that sometimes happens in packaged units. This shouldn't affect performance but may slightly reduce cooling efficiency under partial loads.

Can I install this myself if I'm handy? +

If you have HVAC experience, the sweat connections and electrical hookup are manageable. However, EPA certification is required to handle refrigerant in most jurisdictions. Hiring a licensed contractor avoids legal liability and ensures proper evacuation and charging of the R410A or R22 refrigerant.

How does 16 SEER compare to newer units on the market? +

16 SEER is respectable mid-range efficiency. Newer SEER2 ratings show slightly lower scores due to revised testing, but this unit outperforms many baseline 14-15 SEER systems. For hot climates, 18+ SEER units offer better long-term savings, but 16 SEER is adequate for moderate zones.

What's the real difference between this and a single-stage furnace? +

Two-stage burners adjust heat output to match demand, running at lower capacity 70 percent of the time. This means fewer temperature swings, better humidity control, and quieter operation. Single-stage systems run full blast or off, cycling more frequently and wasting gas during mild days.

Is the 10-year warranty worth the online registration hassle? +

Yes. Registration takes five minutes and activates full coverage. Without it, you're limited to the manufacturer's standard one-year warranty. For a $2,466 investment, spending two minutes online preserves significant protection.

Affiliate disclosure: IndustrialRank earns a commission on qualifying purchases at no extra cost to you. We only recommend products we have independently reviewed.