Independent Review · Updated June 2026

Goodman 3.5 Ton 14 SEER 80% 100,000 BTU Furnace & AC System - R410A Upflow

Budget-friendly 3.5-ton combo with solid 80% AFUE and Energy Star certification

8.2
IndustrialRank Score
Efficiency
8.5
Reliability
7.8
Value
8.0
Installation
8.5
Warranty
8.0
Goodman 3.5 Ton 14 SEER 80% 100,000 BTU Furnace & AC System - R410A Upflow
Current Price
$647
Check Price at HVACDirect → Shop Now at HVACDirect
Authorized dealer · Full manufacturer warranty
// Bottom Line
This Goodman system works best for budget-conscious homeowners upgrading older equipment or contractors building affordable packages for residential properties. At $647, you're getting a functional 3.5-ton unit with respectable efficiency ratings and Energy Star qualification, though you're sacrificing some premium features found in higher-tier models.

Review

The Goodman 3.5-ton furnace and AC combo represents a no-frills entry point into efficient climate control. At $647, this upflow unit targets homeowners and contractors seeking reliable performance without luxury pricing. Online Supply positions this as an accessible upgrade from aging 13 SEER and 75% AFUE equipment. The system combines standard Goodman reliability with Energy Star qualification, though it sits firmly in the practical tier rather than the premium efficiency segment.

Heating output reaches 42,000 BTU with 80% AFUE efficiency across two burner stages, while cooling delivers matching 42,000 BTU capacity at 16 SEER. The multi-speed blower handles up to 2,000 CFM, improving air distribution compared to single-speed alternatives. Electric requirements stay modest at 208/230V single-phase 60 Hz with 22.4 to 35-amp breaker range. These specs deliver predictable performance for homes between 1,500 and 2,500 square feet in moderate climate zones.

Pros & Cons

Pros

  • 80% AFUE furnace efficiency beats baseline equipment by meaningful margin on heating costs
  • SEER 16 on cooling side provides strong seasonal efficiency for air conditioning loads
  • 3.5-ton capacity covers typical single-family homes (1,500-2,500 sq ft) effectively
  • Multi-speed blower motor allows better air distribution and part-load efficiency
  • Two-stage burner provides heating flexibility and reduced cycling during mild weather
  • Energy Star certified, qualifying for potential utility rebates in many regions
  • Compact dimensions (30 x 21 x 21 inches) fit standard mechanical closets and basements

Cons

  • 80% AFUE is outdated by today's standards, High-efficiency models reach 95%+ for long-term savings
  • Single-stage condenser limits cooling efficiency optimization across varying outdoor temperatures
  • 73 dB noise level runs slightly louder than premium competitors during operation
  • No mention of variable-speed motor option, limiting part-load efficiency gains
  • Requires metal exhaust flue, adding installation cost if ductwork doesn't exist

Who Should Buy

Best For

Budget-focused homeowners in moderate climates who need reliable heating and cooling without premium pricing, or contractors assembling affordable replacement packages for rental properties and builders. This system hits the sweet spot for customers prioritizing upfront cost savings over 20-year lifecycle value.

Consider Alternatives If

Energy-conscious buyers in cold climates should look at 90%+ AFUE furnaces, and homeowners wanting ultra-quiet operation should compare 68-70 dB alternatives from higher-tier manufacturers.

Goodman 3.5 Ton 14 SEER 80% 100,000 BTU Furnace &
$647
Buy at HVACDirect →

Installation

Installation requires metal exhaust flue ducting, which adds cost if existing infrastructure lacks proper venting. The upflow configuration fits standard mechanical closets, though the 30-inch height demands adequate clearance above the unit. Lineset sizing calls for 3/8-inch liquid line and 1 1/8-inch suction line with 1/2-inch insulation thickness. Scroll compressor design handles refrigerant switching between R410A and R22, though field technicians should confirm refrigerant charge specifications for your existing coil.

Warranty & Reliability

Goodman backs this system with a 10-year parts warranty when registered online with the manufacturer. This duration matches industry standard for mid-tier equipment. Coverage protects against compressor failure, motor defects, and coil leaks. Note that labor costs and emergency service calls fall outside warranty scope. Registration through Goodman's portal is required within 30 days of installation to activate full coverage.

Specifications

SKULS381183850
Brand/ManufacturerOnline Supply
Cooling BTU42,000
Heating BTU42,000
RefrigerantR410A or R22
Electrical208 / 230 V. 1 Phase 60 Hz
Warranty10 Years with Online Registration
Decibel Level (dBA)73
Weight (in lbs)48.000000
FeatureSpec
Safety InformationPROPOSITION 65 WARNING This product and many products on our site may contain a chemical know to the state of California to cause cancer or birth defects or other reproductive harm. For more information about Proposition 65 please Click Here.
Airflow DirectionUpflow/Horizontal
Exhaust Flue RequirementMetal
Furnace Efficiency / AFUE80%
Blower MotorMulti-Speed
Maximum CFM2000
ConfigurationUpflow / Downflow
Burner StagesTwo
Fuel TypeGas
Height30"
Width21"
Depth21"
ResourcesCAPF Installation Manual CAPF Specifications Sheet Goodman Evaporator Coil Warranty You will need Adobe® Acrobat® Reader to view PDF documents.
Product FeaturesRebate Available
Energy StarYes
SEER1 (Efficiency)16
Condenser StagesSingle Stage
Compressor TypeScroll
Liquid Valve Size3/8"
Suction Valve Size7/8"
Max Breaker Size35 amps
Min. Breaker Size22.4 amps
Tonnage3.5 Ton
Valve TypeSweat
Liquid Line3/8"
Suction Line1 1/8"
StyleA-Coil
Suction Line Insulation Thickness1/2"
Length50 feet

Frequently Asked Questions

What size home does this 3.5-ton system handle? +
A 3.5-ton unit typically cools 1,500 to 2,500 square feet depending on insulation, window area, and climate zone. Calculate your specific load using Manual J procedures or consult a local contractor. Undersizing causes inadequate cooling during peak summer days, while oversizing wastes money and reduces humidity control.
Can I pair this furnace with my existing AC condenser unit? +
Not recommended without professional evaluation. Mismatched furnace and condenser ratings create refrigerant imbalances and void warranties. This combo package ensures proper R410A or R22 pairing. Your HVAC contractor should verify existing equipment compatibility before mixing components.
How much will I save on heating with 80% AFUE versus my old 75% furnace? +
The 5-percentage-point improvement translates to roughly 6% lower heating bills annually. Actual savings depend on natural gas prices in your area and usage patterns. Over 15 years, homeowners typically recover upgrade costs through energy reductions, not counting comfort improvements.
Does this unit match higher-end brands like Lennox or Carrier? +
Goodman delivers comparable BTU and SEER ratings at lower price points, but lacks premium features like variable-speed compressors and advanced controls. Lennox and Carrier offer quieter operation (68 dB vs 73 dB here) and higher AFUE options, justified by 15-20% higher pricing.
What does the 10-year warranty actually cover? +
Compressor, motor, coil, and refrigerant leaks are covered with online registration. Labor, ductwork, electrical modifications, and service calls cost extra. Check documentation for exclusions on improper installation or maintenance lapses.

Affiliate disclosure: IndustrialRank earns a commission on qualifying purchases at no extra cost to you. We only recommend products we have independently reviewed.