Independent Review · Updated June 2026

Goodman 3.5 Ton 14 SEER 80% 80,000 BTU Furnace & AC System - R410A Upflow

Solid 80% furnace paired with 16 SEER cooling, Energy Star certified and budget-friendly.

7.8
IndustrialRank Score
Efficiency
8.2
Reliability
7.9
Value
8.1
Installation
7.6
Warranty
7.8
Goodman 3.5 Ton 14 SEER 80% 80,000 BTU Furnace & AC System - R410A Upflow
Current Price
$0
Check Price at HVACDirect → Shop Now at HVACDirect
Authorized dealer · Full manufacturer warranty
// Bottom Line
This 3.5-ton combo system works well for homeowners upgrading from older equipment in moderate climates who value straightforward operation over advanced features. The 80% AFUE furnace and 16 SEER cooling deliver respectable efficiency without premium pricing, making it practical for budget-conscious replacements.

Review

The Goodman 3.5 Ton furnace and AC combination represents the practical middle ground in residential HVAC. This system pairs an 80% AFUE gas furnace with R410A cooling, delivering Energy Star certification without exotic technology. Online Supply positions this unit as a straightforward replacement option for contractors and homeowners balancing performance against budget constraints. The upflow configuration suits most residential installations, though tonnage labeling inconsistencies in specs require clarification before purchase.

Performance numbers tell a balanced story. The 80,000 BTU furnace output handles serious heating loads, while the 42,000 BTU cooling capacity and 16 SEER1 rating provide solid air conditioning efficiency. Single-stage design means less precise modulation than pricier competitors, but the scroll compressor is field-proven for longevity. At 73 dB, noise output sits middle-of-the-road, acceptable for most installations but worth noting if quiet operation matters to you. Electrical requirements run 22.4 to 35 amps, manageable for standard residential panels.

Pros & Cons

Pros

  • Energy Star certified with 16 SEER1 cooling and 80% AFUE furnace for solid efficiency
  • 42,000 BTU cooling capacity handles 3.5-ton loads effectively in most residential applications
  • 80,000 BTU heating output covers substantial heating demands in moderate climates
  • Single-stage scroll compressor design is proven reliable with minimal maintenance
  • Multi-speed PSC blower motor with up to 2,000 CFM supports even airflow distribution

Cons

  • Single-stage components lack the fine-tuning and efficiency gains of two-stage or variable-speed designs
  • 73 dB noise level is moderately loud, noticeable during operation compared to quieter models
  • Spec sheet shows conflicting tonnage information, listing both 3.5 and 5 tons, creating buyer confusion

Who Should Buy

Best For

Homeowners replacing aging furnace-AC combos in moderate climates who need straightforward, reliable equipment without smart controls. Contractors seeking dependable systems for mid-range residential projects will appreciate the proven scroll compressor and simple installation profile.

Consider Alternatives If

Anyone in hot climates needing maximum cooling efficiency or those prioritizing quiet operation should explore variable-speed or two-stage alternatives.

Goodman 3.5 Ton 14 SEER 80% 80,000 BTU Furnace & A
$0
Buy at HVACDirect →

Installation

Installation demands standard HVAC knowledge. The upflow A-coil configuration works with top-mounted flue venting, requiring metal ductwork to code. Suction and liquid line sizes (1 1/8 inches and 3/8 inches respectively) are industry standard, and the included 50 feet of 1/2-inch insulation covers typical runs. Multi-speed blower requires proper ductwork balancing. DIY installation is not recommended; professional commissioning ensures warranty validity and proper performance.

Warranty & Reliability

The 10-year coverage applies with online registration, a standard goodwill period for equipment at this price point. This protects against manufacturing defects but excludes normal wear, improper installation, and refrigerant loss. Registration is mandatory to activate protection, so document your purchase immediately. Coverage typically includes compressor and heat exchanger components.

Specifications

SKULS381183850
Brand/ManufacturerOnline Supply
Cooling BTU42,000
Heating BTU80,000
RefrigerantR410A or R22
Electrical120 V. 1 Phase 60 Hz
Warranty10 Years with Online Registration
Decibel Level (dBA)73
Weight (in lbs)48.000000
FeatureSpec
Product FeaturesRebate Available
Energy StarYes
SEER1 (Efficiency)16
Condenser StagesSingle Stage
Compressor TypeScroll
Liquid Valve Size3/8"
Suction Valve Size7/8"
Max Breaker Size35 amps
Min. Breaker Size22.4 amps
Tonnage5 Ton
Valve TypeSweat
Height30"
Width21"
Depth21"
ResourcesCAPF Installation Manual CAPF Specifications Sheet Goodman Evaporator Coil Warranty You will need Adobe® Acrobat® Reader to view PDF documents.
Safety InformationPROPOSITION 65 WARNING This product and many products on our site may contain a chemical know to the state of California to cause cancer or birth defects or other reproductive harm. For more information about Proposition 65 please Click Here.
Airflow DirectionUpflow/Horizontal
Exhaust Flue RequirementMetal
Furnace Efficiency / AFUE80%
Blower MotorMulti Speed - PSC
Maximum CFM2000
ConfigurationUpflow / Downflow
Flue LocationTop
Burner StagesSingle
Fuel TypeGas
Liquid Line3/8"
Suction Line1 1/8"
StyleA-Coil
Suction Line Insulation Thickness1/2"
Length50 feet

Frequently Asked Questions

Does this system use R410A or R22 refrigerant? +
Specs list both options, but R410A is standard for new Goodman equipment. Confirm with your supplier before purchase, as R410A is EPA-required for new installations and incompatible with R22 systems. Mixing refrigerants voids warranty and damages compressors.
Will this fit my upflow installation in a basement? +
Yes, it's configured for upflow with A-coil design. Dimensions are 30 inches tall, 21 inches wide, and 21 inches deep. Verify your basement ceiling height and confirm adequate clearance for service access before ordering. Top-mounted flue venting requires unobstructed path to chimney.
How does 16 SEER1 compare to modern high-efficiency systems? +
It's respectable but not cutting-edge. New variable-speed systems reach 18-20 SEER2. However, 16 SEER1 still qualifies for Energy Star and cuts cooling costs significantly versus older units, making it practical for budget-conscious upgrades without premium pricing.
What's the difference between the listed 3.5 ton and 5 ton specifications? +
This is a confusing discrepancy in the specs. The cooling BTU (42,000) matches 3.5 tons, but tonnage field shows 5 tons. Contact Online Supply directly for clarification, as this affects load matching and installation planning significantly.
Is online registration required for the 10-year warranty? +
Yes, mandatory registration activates 10-year coverage. Without it, you may lose warranty protection. Complete registration immediately upon installation with documentation of purchase and serial numbers.

Affiliate disclosure: IndustrialRank earns a commission on qualifying purchases at no extra cost to you. We only recommend products we have independently reviewed.