Review
The Goodman 3.5-ton upflow furnace-AC system represents a pragmatic choice for residential heating and cooling replacements. This manufacturer consistently delivers dependable equipment at competitive price points, and this model combines gas heating with air conditioning in a single integrated package. The upflow configuration fits standard basement or utility closet installations common in North American homes. Online Supply distributes this unit with straightforward specs and standard Goodman documentation, making sourcing straightforward for contractors.
Performance metrics are genuinely strong where they matter most. The furnace achieves 96% AFUE efficiency, meaning 96 of every 100 BTU consumed converts to usable heat, placing it in the high-efficiency category. The AC delivers 16 SEER2 rating with a scroll compressor that handles 42,000 BTU cooling capacity. The two-stage burner and ECM multi-speed blower (up to 2000 CFM) enable modulating operation rather than full on-off cycling, improving comfort and reducing energy waste during partial-load conditions.
Pros & Cons
Pros
- 96% AFUE furnace rating means lower heating bills compared to 80-90% units, saving $15-25 monthly in winter
- 16 SEER2 air conditioner with scroll compressor and ECM blower reduces cooling costs by 20-30% versus baseline models
- Two-stage burner and multi-speed blower allow modulating operation for better comfort and efficiency
- PVC/plastic flue exhaust simplifies venting in modern homes without masonry chimneys
- ENERGY STAR certified for EPA recognition and potential utility rebate eligibility
Cons
- Single-stage compressor cannot ramp down capacity, reducing efficiency during mild weather operation
- 73 dB noise level is higher than variable-capacity competitors, noticeable during AC startup
- 5-ton cooling capacity with only 42,000 BTU cooling output creates tonnage specification mismatch that needs clarification
Who Should Buy
Best For
Homeowners in moderate climates replacing failed furnace-AC units who prioritize efficiency over premium features. Contractors seeking reliable, mid-tier equipment for standard residential retrofit jobs where ENERGY STAR compliance adds resale value.
Consider Alternatives If
Buyers in extreme climates, very large homes, or those prioritizing quiet operation should look at variable-capacity systems with two-stage compressors.
Installation
Installation requires 115V single-phase 60Hz service with 23.5 to 40-amp breaker sizing. The unit accepts standard 3/8 inch liquid lines and 7/8 inch suction lines with 1/2 inch insulation (50 feet included). A-coil configuration with right-side flue placement offers flexibility. PVC exhaust venting simplifies installation compared to masonry requirements, though proper condensate drainage and ductwork sealing remain critical for peak efficiency.
Warranty & Reliability
Goodman provides 10 years full parts and labor coverage upon online registration. This warranty is competitive for mid-tier equipment and covers compressor, heat exchanger, and coil failures. Registration is required to activate protection, so buyers must complete documentation promptly. Extended warranty options may be available through the distributor.
Specifications
| SKU | LS381183850 |
| Brand/Manufacturer | Online Supply |
| Cooling BTU | 42,000 |
| Heating BTU | 120,000 |
| Refrigerant | R410A |
| Electrical | 115 V. 1 Phase 60 Hz |
| Warranty | 10 Years with Online Registration |
| Decibel Level (dBA) | 73 |
| Weight (in lbs) | 48.000000 |
| Feature | Spec |
| Energy Star | Yes |
| SEER1 (Efficiency) | 16 |
| Condenser Stages | Single Stage |
| Compressor Type | Scroll |
| Liquid Valve Size | 3/8" |
| Suction Valve Size | 7/8" |
| Max Breaker Size | 40 amps |
| Min. Breaker Size | 23.5 amps |
| Tonnage | 5 Ton |
| Height | 30" |
| Width | 24.5" |
| Depth | 21" |
| Resources | CAPT Installation Manual CAPT Specifications Sheet Goodman Evaporator Coil Warranty You will need Adobe® Acrobat® Reader to view PDF documents. |
| Safety Information | PROPOSITION 65 WARNING This product and many products on our site may contain a chemical know to the state of California to cause cancer or birth defects or other reproductive harm. For more information about Proposition 65 please Click Here. |
| Airflow Direction | Upflow/Horizontal |
| Exhaust Flue Requirement | Plastic / PVC |
| Furnace Efficiency / AFUE | 96% |
| Blower Motor | Multi-Speed - ECM |
| Maximum CFM | 2000 |
| Configuration | Upflow / Downflow |
| Flue Location | Right |
| Burner Stages | Two |
| Fuel Type | Gas |
| Liquid Line | 3/8" |
| Suction Line | 1 1/8" |
| Style | A-Coil |
| Suction Line Insulation Thickness | 1/2" |
| Length | 50 feet |
Frequently Asked Questions
Affiliate disclosure: IndustrialRank earns a commission on qualifying purchases at no extra cost to you. We only recommend products we have independently reviewed.