Review
The Goodman 3 Ton gas furnace and air conditioner system is a competent mid-market HVAC solution designed for straightforward residential replacement applications. At $2,705, it occupies the practical middle ground between budget equipment and premium high-efficiency models. This upflow-configured unit combines an 80,000 BTU furnace with a 36,000 BTU (3 ton) air conditioner, making it suitable for homes in the 1,200-1,600 square foot range. Goodman equipment has solid contractor acceptance, and this particular system carries AHRI certification number 204633307, confirming it meets performance standards.
Performance metrics show a balanced efficiency profile. The 80% AFUE rating means 80 cents of every heating dollar actually warms your home, a meaningful step above budget 75% models but below premium 95% units. On the cooling side, the 13 SEER rating translates to roughly $30-50 annual savings versus minimum-code 10 SEER equipment in typical climates. The two-stage burner adjusts heating output for better temperature stability, while the variable-speed blower motor runs at reduced capacity during mild conditions, cutting runtime and noise. Maximum airflow reaches 2,000 CFM, and electrical requirements are reasonable at 208/230V single-phase with a 30-amp breaker maximum.
Pros & Cons
Pros
- 80% AFUE furnace efficiency is above minimum code in most states, delivering real heating savings over 70-75% units
- 13 SEER cooling rating meets EnergyStar-equivalent performance for air conditioning without premium cost
- Two-stage burner provides better temperature control and comfort compared to single-stage models
- Variable-speed blower motor adjusts output from 0-2000 CFM, reducing runtime noise and energy waste
- 10-year warranty with online registration covers parts and compressor fully
- Dual fuel capability accepts both natural gas and propane without modifications
Cons
- Not Energy Star certified, limiting eligibility for some utility rebates that could offset purchase price
- Single-stage condenser means cooling runs at full capacity only, less efficient than two-stage units in mild weather
- 74 dB noise level is moderate, noticeably louder than high-efficiency units with variable-stage compressors
- R410A refrigerant is standard but will eventually face phase-down pressure as HVAC industry shifts toward lower-GWP alternatives
Who Should Buy
Best For
Homeowners replacing 15-25 year old systems who want reliable performance without stretching budgets toward $4,000+ high-efficiency models. Contractors servicing residential properties in moderate climates where 80% AFUE and 13 SEER represent reasonable cost-to-benefit tradeoffs.
Consider Alternatives If
Anyone in very cold climates, considering long-term ownership beyond 15 years, or targeting maximum utility rebates should look at 95% AFUE furnaces paired with 16+ SEER cooling instead.
Installation
Installation demands standard HVAC skills and equipment. The unit requires a metal exhaust flue for the furnace section, proper refrigerant lines sized at 3/8 inch liquid and 7/8 inch suction with 3/8 inch insulation thickness, and 30 feet of lineset maximum run. Upflow configuration suits basements or utility closets. Installation manuals are available as PDFs, and the relatively compact footprint (30 inches tall, 24.5 inches wide, 21 inches deep) fits most existing equipment spaces.
Warranty & Reliability
Coverage extends 10 years on parts and compressor when registered online, a standard industry offering. This covers manufacturing defects, labor is not included. Ten years aligns with typical equipment lifespan, providing solid protection. Registration is straightforward and unlocks the full benefit, protecting your investment during the critical first decade of operation.
Specifications
| SKU | LS38783830 |
| Brand/Manufacturer | Online Supply |
| Cooling BTU | 36,000 |
| Heating BTU | 80,000 |
| Refrigerant | R410A |
| Electrical | 208 / 230 V. 1 Phase 60 Hz |
| Warranty | 10 Years with Online Registration |
| Decibel Level (dBA) | 74 |
| Weight (in lbs) | 30.000000 |
| Feature | Spec |
| AHRI Certificate Number | 204633307 |
| Airflow Direction | Upflow/Horizontal |
| Exhaust Flue Requirement | Metal |
| Furnace Efficiency / AFUE | 80% |
| Blower Motor | Variable Speed |
| Maximum CFM | 2000 |
| Configuration | Upflow / Downflow |
| Burner Stages | Two |
| Fuel Type | Propane, Natural Gas |
| Height | 30" |
| Width | 24.5" |
| Depth | 21" |
| Resources | CAPT Installation Manual CAPT Specifications Sheet Goodman Evaporator Coil Warranty You will need Adobe® Acrobat® Reader to view PDF documents. |
| Safety Information | PROPOSITION 65 WARNING This product and many products on our site may contain a chemical know to the state of California to cause cancer or birth defects or other reproductive harm. For more information about Proposition 65 please Click Here. |
| Replaces | GSX130362, GSX130363, GSX130365 |
| Energy Star | No |
| SEER1 (Efficiency) | 13 |
| Condenser Stages | Single Stage |
| Compressor Type | Reciprocating |
| Liquid Valve Size | 3/8" |
| Suction Valve Size | 3/4" |
| Max Breaker Size | 30 amps |
| Min. Breaker Size | 19.1 amps |
| Tonnage | 3.5 Ton |
| Valve Type | Sweat |
| Liquid Line | 3/8" |
| Suction Line | 7/8" |
| Style | A-Coil |
| Suction Line Insulation Thickness | 3/8" |
| Length | 30 feet |
Frequently Asked Questions
Affiliate disclosure: IndustrialRank earns a commission on qualifying purchases at no extra cost to you. We only recommend products we have independently reviewed.