Review
The ACiQ 3-ton system represents a solid middle ground in the residential HVAC market. It pairs a Goodman-built furnace with a matching air conditioner in one engineered package, reducing compatibility headaches for contractors and homeowners alike. With Energy Star certification and AHRI matching number 7368835, this unit meets modern efficiency codes across most jurisdictions. The dual-fuel capability for propane or natural gas adds flexibility for various installation scenarios.
Performance metrics tell the story here. The furnace delivers 80,000 BTU of heating with 96% AFUE efficiency, meaning nearly all fuel converts to usable heat rather than venting waste. The air conditioner produces 36,000 BTU at 13 SEER1 cooling efficiency. Two-stage burners and a variable-speed ECM blower motor optimize runtime rather than simple on-off cycling. This 3.5-ton coil pairs with a reciprocating compressor running on R454B refrigerant, a newer low-GWP option replacing older R22 and R410A equipment.
Pros & Cons
Pros
- 96% AFUE furnace efficiency reduces heating costs significantly compared to standard 80-85% units
- Two-stage burner and variable-speed ECM blower motor allow precise comfort control and lower runtime
- 13 SEER cooling with Energy Star certification meets modern efficiency standards
- R454B refrigerant is newer low-GWP option better for environmental compliance
- PVC exhaust compatibility simplifies installation in modern homes without masonry chimneys
- 10-year warranty with online registration provides solid peace of mind
Cons
- Single-stage compressor limits cooling efficiency gains compared to two-stage models at premium price points
- 74 dB operating noise is average, not quiet compared to high-end systems under 70 dB
- Reciprocating compressor design is less refined than rotary alternatives in some competitor lineups
Who Should Buy
Best For
Homeowners in moderate climates who heat and cool regularly and want efficiency without premium pricing. This works well for replacing 15+ year old equipment where the furnace and AC were sized together originally.
Consider Alternatives If
Buyers seeking ultra-quiet operation or maximum cooling performance should look at two-stage compressor models. Those in heating-only climates may want furnace-only units to reduce costs.
Installation
Installation is straightforward for experienced contractors. The upflow/horizontal configuration fits standard attic or basement placements. Suction and liquid line sizes are 7/8 inch and 3/8 inch respectively, with 3/8 inch insulation thickness on the suction line. Electrical requirements are modest at 115V, 1-phase 60Hz with a 19.1 to 30 amp breaker range. PVC exhaust venting simplifies new construction or retrofit scenarios without traditional chimneys.
Warranty & Reliability
ACiQ backs this system with a 10-year parts warranty when registered online, covering the compressor, coil, and furnace components equally. This registration requirement is standard in the industry and takes minutes to complete. Ten years is competitive for mid-tier equipment, though some premium brands offer 12 to 15 year terms. Coverage excludes wear items and installation labor.
Specifications
| SKU | ACiQ-36-EHPD-UPG |
| Brand/Manufacturer | ACiQ |
| Cooling BTU | 36,000 |
| Heating BTU | 80,000 |
| Refrigerant | R454B |
| Electrical | 115 V. 1 Phase 60 Hz |
| Warranty | 10 Years with Online Registration |
| Decibel Level (dBA) | 74 |
| Weight (in lbs) | 120.000000 |
| Feature | Spec |
| Replaces | GSX130362, GSX130363, GSX130365 |
| Energy Star | Yes |
| SEER1 (Efficiency) | 13 |
| Condenser Stages | Single Stage |
| Compressor Type | Reciprocating |
| Liquid Valve Size | 3/8" |
| Suction Valve Size | 3/4" |
| Max Breaker Size | 30 amps |
| Min. Breaker Size | 19.1 amps |
| Tonnage | 3.5 Ton |
| Valve Type | Sweat |
| Height | 30" |
| Width | 21" |
| Depth | 21" |
| Resources | CAPT Installation Manual CAPT Specifications Sheet Goodman Evaporator Coil Warranty You will need Adobe® Acrobat® Reader to view PDF documents. |
| Safety Information | PROPOSITION 65 WARNING This product and many products on our site may contain a chemical know to the state of California to cause cancer or birth defects or other reproductive harm. For more information about Proposition 65 please Click Here. |
| AHRI Certificate Number | 7368835 |
| Airflow Direction | Upflow/Horizontal |
| Exhaust Flue Requirement | Plastic / PVC |
| Furnace Efficiency / AFUE | 96% |
| Blower Motor | Variable Speed - ECM |
| Maximum CFM | 1600 |
| Configuration | Upflow / Downflow |
| Flue Location | Right |
| Burner Stages | Two |
| Fuel Type | Propane, Natural Gas |
| Liquid Line | 3/8" |
| Suction Line | 7/8" |
| Style | A-Coil |
| Suction Line Insulation Thickness | 3/8" |
| Length | 30 feet |
Frequently Asked Questions
Affiliate disclosure: IndustrialRank earns a commission on qualifying purchases at no extra cost to you. We only recommend products we have independently reviewed.