Review
This 3-ton ACiQ horizontal furnace-coil system bridges budget-conscious buyers and efficiency requirements. Manufactured to replace GSX130362, GSX130363, and GSX130365 models, it delivers 100,000 BTU heating and 36,000 BTU cooling in a configuration designed specifically for horizontal attic installation. The unit combines Goodman's proven reliability with modern refrigerant standards and ENERGY STAR qualification, making it practical for homeowners tired of utility bills but unwilling to overspend.
Performance data shows solid real-world capability. The furnace achieves 96% AFUE efficiency, meaning 96 cents of every heating dollar reaches your home. Cooling comes in at 13 SEER1 with two-stage burner control for comfort modulation. The multi-speed ECM blower motor caps out at 1,600 CFM and runs on standard 115V single-phase power (19.1 to 30-amp breaker range). R454B refrigerant, 3/8-inch liquid lines, and 7/8-inch suction lines work within standard installation practices for residential systems.
Pros & Cons
Pros
- 96% AFUE furnace efficiency exceeds most standard gas furnaces by 5-10 percentage points
- 13 SEER cooling with R454B refrigerant meets current EPA environmental standards
- Multi-speed ECM blower motor adjusts to actual heating/cooling demand, reducing electricity waste
- Two-stage burner provides better comfort control and quieter operation at part load
- 100,000 BTU heating capacity handles demanding climates without oversizing
Cons
- Single-stage compressor lacks variable cooling capacity for maximum efficiency gains
- 74 dB noise level runs slightly louder than premium units during peak operation
- Horizontal configuration limits placement flexibility compared to vertical options
Who Should Buy
Best For
Homeowners in single-story homes with horizontal attic space who need dependable heating and cooling without spending on top-tier variable-capacity systems. Contractors upgrading from older Goodman GSX models will appreciate the drop-in compatibility.
Consider Alternatives If
Buyers prioritizing ultra-quiet operation or those with space constraints should compare vertical upflow alternatives or higher-SEER variable-capacity units.
Installation
Horizontal mounting requires adequate attic clearance and structural support for the 120-pound unit. Standard sweat valve connections and PVC/plastic exhaust flue compatibility align with typical residential installations. The system needs 30 feet of suction line insulation (3/8-inch thickness included) to prevent efficiency loss. Most HVAC contractors complete installation in one full day when upgrading existing systems.
Warranty & Reliability
Ten-year full parts coverage applies with online registration, protecting against compressor failure, coil leaks, and component defects. This warranty matches industry-standard coverage for mid-tier equipment and covers labor in many cases depending on your service agreement. Registration takes minutes and significantly extends peace of mind.
Specifications
| SKU | ACiQ-36-EHPD-UPG |
| Brand/Manufacturer | ACiQ |
| Cooling BTU | 36,000 |
| Heating BTU | 100,000 |
| Refrigerant | R454B |
| Electrical | 115 V. 1 Phase 60 Hz |
| Warranty | 10 Years with Online Registration |
| Decibel Level (dBA) | 74 |
| Weight (in lbs) | 120.000000 |
| Feature | Spec |
| Replaces | GSX130362, GSX130363, GSX130365 |
| Energy Star | Yes |
| SEER1 (Efficiency) | 13 |
| Condenser Stages | Single Stage |
| Compressor Type | Reciprocating |
| Liquid Valve Size | 3/8" |
| Suction Valve Size | 3/4" |
| Max Breaker Size | 30 amps |
| Min. Breaker Size | 19.1 amps |
| Tonnage | 3.5 Ton |
| Valve Type | Sweat |
| Height | 21" |
| Width | 21.125" |
| Depth | 26" |
| Resources | CHPF Installation Manual CHPF Specifications Sheet Goodman Evaporator Coil Warranty You will need Adobe® Acrobat® Reader to view PDF documents. |
| Safety Information | PROPOSITION 65 WARNING This product and many products on our site may contain a chemical know to the state of California to cause cancer or birth defects or other reproductive harm. For more information about Proposition 65 please Click Here. |
| Airflow Direction | Upflow/Horizontal |
| Exhaust Flue Requirement | Plastic / PVC |
| Furnace Efficiency / AFUE | 96% |
| Blower Motor | Multi-Speed - ECM |
| Maximum CFM | 1600 |
| Configuration | Horizontal |
| Flue Location | Right |
| Burner Stages | Two |
| Fuel Type | Gas |
| Liquid Line | 3/8" |
| Suction Line | 7/8" |
| Style | A-Coil |
| Suction Line Insulation Thickness | 3/8" |
| Length | 30 feet |
Frequently Asked Questions
Affiliate disclosure: IndustrialRank earns a commission on qualifying purchases at no extra cost to you. We only recommend products we have independently reviewed.