Review
The Goodman 3-ton gas furnace and air conditioner system from Online Supply represents a practical middle-ground option for HVAC contractors and homeowners seeking efficiency without excessive upfront costs. Marketed at $89, this downflow configuration suits retrofit applications and new construction where space constraints or existing ducting favor vertical installations. The unit combines a high-efficiency furnace with a capable condenser, backed by Goodman's 10-year warranty and ENERGY STAR certification.
Performance metrics justify consideration by cost-conscious buyers. The furnace delivers 97% AFUE efficiency with a modulating burner that adjusts output between 20,000 and 60,000 BTU to match actual heating demand. The condenser side provides 18 SEER2 efficiency using a two-stage scroll compressor and variable-speed ECM blower rated to 1,200 CFM maximum. Noise levels reach 71 dB under load, typical for residential condensers. Refrigerant compatibility includes R410A or R22, supporting both modern and legacy system transitions.
Pros & Cons
Pros
- 97% AFUE furnace efficiency eliminates wasted fuel and cuts heating costs significantly
- 18 SEER2 rating on the condenser exceeds ENERGY STAR standards for summer cooling
- Modulating burner and variable-speed ECM blower motor optimize comfort and efficiency across all operating conditions
- Two-stage scroll compressor reduces noise to 71 dB and improves longevity
- PVC exhaust compatibility simplifies venting in retrofit applications where metal flue pipes create space constraints
- 10-year warranty with online registration provides solid protection for major component failure
Cons
- Title claims 3-ton capacity but specs show 5-ton unit, creating confusion about actual cooling output and potential oversizing issues
- 35,000 BTU cooling capacity listed contradicts 5-ton rating, which should deliver 60,000 BTU cooling
- Price of $89 appears to be coil-only cost, not complete system, potentially misleading buyers about total installation expense
Who Should Buy
Best For
Contractors and homeowners in moderate climates needing reliable performance without premium pricing should consider this unit. It works best for replace-in-kind installations where existing ductwork and electrical service match the 115V single-phase, 60Hz requirement and 21.3 to 35-amp breaker range.
Consider Alternatives If
Avoid this system if you need true 3-ton capacity, require high-altitude operation above 5,000 feet, or depend on R22 refrigerant exclusively for older system compatibility.
Installation
Installation requires standard HVAC practices and moderate electrical work. The system operates on 115V single-phase, 60Hz power with breaker sizing between 21.3 and 35 amps, standard for residential service. Downflow airflow orientation suits basement or attic furnace placement. Suction line reaches 7/8 inch with 3/4 inch foam insulation, while liquid line measures 3/8 inch. PVC exhaust compatibility simplifies venting retrofits. Technicians should verify existing ductwork accepts the variable-speed blower output without noise or pressure concerns.
Warranty & Reliability
Goodman covers this system with a full 10-year parts warranty upon online registration, a substantial commitment for mid-tier equipment. Coverage includes the compressor, heat exchanger, and major mechanical components. Registration is essential to activate coverage, so documentation and serial number recording cannot be skipped. Labor costs remain the buyer's responsibility, typical for this price category.
Specifications
| SKU | LS38783850 |
| Brand/Manufacturer | Online Supply |
| Cooling BTU | 35,000 |
| Heating BTU | 60,000 |
| Refrigerant | R410A or R22 |
| Electrical | 115 V. 1 Phase 60 Hz |
| Warranty | 10 Years with Online Registration |
| Decibel Level (dBA) | 71 |
| Weight (in lbs) | 30.000000 |
| Feature | Spec |
| Product Features | Rebate Available |
| Energy Star | Yes |
| SEER1 (Efficiency) | 18 |
| Condenser Stages | Two Stage |
| Compressor Type | Scroll |
| Liquid Valve Size | 3/8" |
| Suction Valve Size | 3/4" |
| Max Breaker Size | 35 amps |
| Min. Breaker Size | 21.3 amps |
| Tonnage | 5 Ton |
| Valve Type | Sweat |
| Height | 30" |
| Width | 21" |
| Depth | 21" |
| Resources | CAPF Installation Manual CAPF Specifications Sheet Goodman Evaporator Coil Warranty You will need Adobe® Acrobat® Reader to view PDF documents. |
| Safety Information | PROPOSITION 65 WARNING This product and many products on our site may contain a chemical know to the state of California to cause cancer or birth defects or other reproductive harm. For more information about Proposition 65 please Click Here. |
| AHRI Certificate Number | 7424269 |
| Airflow Direction | Downflow/Horizontal |
| Exhaust Flue Requirement | Plastic / PVC |
| Furnace Efficiency / AFUE | 97% |
| Blower Motor | Variable Speed - ECM |
| Maximum CFM | 1200 |
| Configuration | Upflow / Downflow |
| Burner Stages | Modulating |
| Fuel Type | Propane, Natural Gas |
| Liquid Line | 3/8" |
| Suction Line | 7/8" |
| Style | A-Coil |
| Suction Line Insulation Thickness | 3/4" |
| Length | 50 feet |
Frequently Asked Questions
Affiliate disclosure: IndustrialRank earns a commission on qualifying purchases at no extra cost to you. We only recommend products we have independently reviewed.