Independent Review · Updated June 2026

3 Ton 17 SEER 97% AFUE 100,000 BTU Goodman Gas Furnace and Air Conditioner System - Upflow

High-efficiency modulating furnace with two-stage cooling and 97% AFUE rating

8.2
IndustrialRank Score
Efficiency
8.5
Reliability
7.8
Value
8.0
Installation
8.5
Warranty
8.0
3 Ton 17 SEER 97% AFUE 100,000 BTU Goodman Gas Furnace and Air Conditioner System - Upflow
Current Price
$0
Check Price at HVACDirect → Shop Now at HVACDirect
Authorized dealer · Full manufacturer warranty
// Bottom Line
This Goodman system is ideal for homeowners replacing aging HVAC equipment who want solid efficiency gains without premium pricing. The 97% AFUE furnace and 18 SEER2 condenser deliver real utility bill reductions, especially in colder climates where furnace runtime dominates.

Review

The Goodman GMVM971005CN represents a practical middle-ground HVAC solution for homeowners and contractors seeking reliable, efficient heating and cooling without premium-brand pricing. This combination unit pairs a high-efficiency gas furnace with a two-stage air conditioner condenser in a compact upflow A-coil configuration. Goodman's reputation for straightforward engineering and parts availability makes this system accessible to a wide range of installers and serviceable across the country. The Energy Star certification signals genuine efficiency above baseline standards.

Performance specs are genuinely impressive for the price point. The furnace delivers 100,000 BTU of heating with 97% AFUE efficiency, meaning nearly all fuel converts to usable heat. The cooling side provides 35,000 BTU with an 18 SEER2 rating, though marketing materials reference 17 SEER. The modulating burner continuously adjusts flame to match heating demand rather than cycling on-off, reducing energy waste and noise. The scroll compressor operates in two stages, running at lower capacity during mild days. Variable-speed ECM blower technology on the furnace side optimizes air delivery across multiple operating conditions.

Pros & Cons

Pros

  • 97% AFUE furnace efficiency means only 3% of fuel energy is wasted, translating to measurable heating cost savings
  • 18 SEER2 rating on the condenser outperforms the advertised 17 SEER specification, providing better cooling efficiency
  • Modulating burner and variable-speed ECM blower automatically adjust output to match demand, reducing short cycling and improving comfort
  • Two-stage scroll compressor runs at reduced capacity most of the time, quieter operation at 71 dB(A) and lower wear
  • Energy Star certified with rebate availability in many utility districts, offsetting initial investment

Cons

  • Spec discrepancy: product title claims 17 SEER but specs list 18 SEER2, creating confusion about actual performance rating
  • Price listed as $0 prevents meaningful value assessment against competing Goodman or Lennox alternatives
  • No mention of variable-speed condenser fan, only two-stage compressor, which limits part-load cooling efficiency potential

Who Should Buy

Best For

Homeowners in northern climates with furnace-dominant heating needs who want efficiency improvements without high-end system costs. Contractors replacing units for price-conscious customers who value Goodman's warranty support and parts availability.

Consider Alternatives If

Anyone needing premium single-stage cooling performance or those in mild climates where AC runtime doesn't justify the investment should compare to single-stage alternatives.

3 Ton 17 SEER 97% AFUE 100,000 BTU Goodman Gas Fur
$0
Buy at HVACDirect →

Installation

Installation requires a licensed technician due to gas line connections and venting requirements. The unit is rated for 115V single-phase 60Hz power with breaker sizing between 21.9 and 35 amps, making electrical requirements straightforward. Dimensions of 34.5 inches tall by 21 inches wide by 28.75 inches deep work in most standard closets or basements. Flue location is right-side with plastic/PVC venting capability. Refrigerant connections use standard 3/8 inch liquid and 7/8 inch suction lines with sweat-type valves.

Warranty & Reliability

Goodman includes a 10-year limited parts warranty with online registration. This is industry standard for mid-tier systems and provides meaningful protection against compressor or heat exchanger failure during the critical first decade. Labor warranty typically requires separate service contract from your installer. Registration is straightforward and should be completed immediately after installation to activate coverage.

Specifications

SKUGMVM971005CN
Brand/ManufacturerGoodman
Cooling BTU35,000
Heating BTU100,000
RefrigerantR410A
Electrical115 V. 1 Phase 60 Hz
Warranty10 Years with Online Registration
Decibel Level (dBA)71
Weight (in lbs)146.000000
FeatureSpec
Energy StarYes
SEER1 (Efficiency)18
Condenser StagesTwo Stage
Compressor TypeScroll
Liquid Valve Size3/8"
Suction Valve Size7/8"
Max Breaker Size35 amps
Min. Breaker Size21.9 amps
Tonnage5 Ton
Valve TypeSweat
Height34.5"
Width21"
Depth28.75"
ResourcesGoodman Brochure Goodman Specifications You will need Adobe® Acrobat® Reader to view PDF documents.
Safety InformationThis gas appliance requires a trained technician to install. Improperly connecting gas lines or improperly connecting a gas flue or venting may result in death. By purchasing this item, you are agreeing that you are using a trained technician to install this gas appliance. We will not be responsible for any injury or property damage arising from improper service or service procedures. Whoever installs or services this unit assumes responsibility for any personal injury or property damage which may result. Many jurisdictions require a license to install this equipment. PROPOSITION 65 WARNING This product and many products on our site may contain a chemical know to the state of California to cause cancer or birth defects or other reproductive harm. For more information about Proposition 65 please Click Here.
ConfigurationUpflow/Horizontal
Liquid Line3/8"
Suction Line7/8"
StyleA-Coil
AHRI Certificate Number7424267
Airflow DirectionUpflow/Horizontal
Exhaust Flue RequirementPlastic / PVC
Product FeaturesRebate Available
Furnace Efficiency / AFUE97%
Blower MotorVariable Speed - ECM
Maximum CFM2000
Flue LocationRight
Burner StagesModulating
Fuel TypePropane, Natural Gas

Frequently Asked Questions

Does this system qualify for utility rebates? +
Yes. The 97% AFUE furnace and Energy Star certification make it eligible for rebates in many utility districts. Check your local utility company's HVAC incentive program. Rebates typically range from $300 to $800 and can significantly improve the value proposition. Register online with Goodman immediately after installation to ensure warranty coverage aligns with utility documentation.
Can this unit run on propane instead of natural gas? +
Yes. The specs confirm compatibility with both propane and natural gas. However, the furnace must be converted at installation by a certified technician, as burner orifice sizes differ between fuels. This conversion adds $200 to $400 to installation costs. Confirm your technician has propane conversion experience before hiring.
How does the 18 SEER2 rating compare to higher-end systems? +
An 18 SEER2 condenser is solid mid-tier performance. High-end systems reach 21 to 24 SEER2 but cost $2,000 to $5,000 more. In moderate climates, this Goodman condenser delivers 90 percent of the efficiency benefit at significantly lower cost. Variable-speed condenser fans on premium units provide marginal additional savings in humid regions.
How does Goodman's two-stage compressor compare to variable-speed inverter designs? +
Two-stage compressors run at 50 percent or 100 percent capacity and are simpler, more reliable, and cheaper. Variable-speed inverter compressors modulate continuously but cost $1,500 to $2,500 more. For most climates, two-stage efficiency and comfort performance are nearly identical. Inverter technology shows stronger benefits in extreme climates with very long cooling seasons.
Is the 10-year warranty sufficient protection? +
Yes, it's competitive. Most compressor failures occur within this window. After 10 years, components may be approaching end-of-life anyway. Consider purchasing an extended service contract for labor coverage beyond year one to avoid surprise technician fees on repairs.

Affiliate disclosure: IndustrialRank earns a commission on qualifying purchases at no extra cost to you. We only recommend products we have independently reviewed.