Review
The Goodman 4-ton gas furnace and air conditioner system represents the practical middle of the residential HVAC market. Manufactured by a brand with decades of OEM supply experience, this upflow configuration delivers honest heating and cooling without attempting premium positioning. It slots into the sweet spot for homeowners replacing worn equipment who understand that middle-tier equipment can run trouble-free for 15-20 years when properly maintained and correctly sized.
Performance metrics are straightforward and transparent. The furnace generates 100,000 BTU across two burner stages, hitting 80% AFUE efficiency. On the cooling side, the 4-ton (48,000 BTU) capacity pairs with a 13 SEER rating, pulling 2000 CFM maximum through its high-efficiency multi-speed blower. These numbers cluster around industry averages rather than cutting edge, which means predictable performance without exotic components that might complicate servicing.
Pros & Cons
Pros
- 13 SEER cooling efficiency qualifies for some utility rebates while keeping equipment costs reasonable
- 100,000 BTU heating capacity with two-stage burner allows modulation for comfort and lower operating costs
- High-efficiency multi-speed blower motor, 2000 CFM maximum, reduces short cycling and improves air distribution
- 10-year warranty with online registration covers parts and compressor, standard protection for this tier
- Compact 30x21x21 inch footprint fits upflow/horizontal applications in tight utility closets or attics
- Reciprocating compressor uses R410A refrigerant, established performance track record in residential systems
Cons
- 80% AFUE is entry-level for furnaces, older homes lose 20% of heating energy up the flue compared to 95% models
- Not Energy Star certified, meaning higher operating costs over 15-20 year lifespan versus qualified units
- Single-stage condenser cycles on/off fully rather than modulating, less precise temperature control than two-stage units
- 76 dB noise level runs louder than quieter premium models, noticeable in homes with nearby bedrooms
- Requires metal exhaust flue, not compatible with homes using PVC condensing configurations
Who Should Buy
Best For
Homeowners in non-extreme climates (not Minnesota winters or Arizona summers) replacing 15-20 year old systems who value reliability over premium efficiency. Contractors building new homes where first-cost matters and owners plan moderate tenure.
Consider Alternatives If
Energy-conscious homeowners in high-heating climates should look at 90%+ AFUE furnaces, and those in hot climates should consider 16+ SEER units; premium buyers wanting whisper-quiet operation or smart modulation should upgrade to higher-tier brands.
Installation
Installation demands standard sheet metal for exhaust flue and requires 208/230V single-phase 60Hz power with 26.3-45 amp breaker sizing. The upflow/horizontal configuration fits common closet and attic spaces with its compact 30x21x21 inch footprint. Suction and liquid lines measure 1 1/8 inch and 3/8 inch respectively with sweat-type valves, supporting standard field practices.
Warranty & Reliability
Goodman includes a 10-year warranty on parts and compressor when registered online. This coverage matches competitor offerings at this price point and covers defects in materials and workmanship. Registration is straightforward and protects against unexpected failures during the critical first decade, though coverage ends at year 10 regardless of equipment lifespan.
Specifications
| SKU | LS381183850 |
| Brand/Manufacturer | Online Supply |
| Cooling BTU | 48,000 |
| Heating BTU | 100,000 |
| Refrigerant | R410A |
| Electrical | 208 / 230 V. 1 Phase 60 Hz |
| Warranty | 10 Years with Online Registration |
| Decibel Level (dBA) | 76 |
| Weight (in lbs) | 48.000000 |
| Feature | Spec |
| Airflow Direction | Upflow/Horizontal |
| Exhaust Flue Requirement | Metal |
| Furnace Efficiency / AFUE | 80% |
| Blower Motor | High Efficiency Multi-Speed |
| Maximum CFM | 2000 |
| Configuration | Upflow / Downflow |
| Burner Stages | Two |
| Fuel Type | Gas |
| Height | 30" |
| Width | 21" |
| Depth | 21" |
| Resources | CAPT Installation Manual CAPT Specifications Sheet Goodman Evaporator Coil Warranty You will need Adobe® Acrobat® Reader to view PDF documents. |
| Safety Information | PROPOSITION 65 WARNING This product and many products on our site may contain a chemical know to the state of California to cause cancer or birth defects or other reproductive harm. For more information about Proposition 65 please Click Here. |
| Replaces | GSX130483, GSX130484, GSX130485 |
| Energy Star | No |
| SEER1 (Efficiency) | 13 |
| Condenser Stages | Single Stage |
| Compressor Type | Reciprocating |
| Liquid Line | 3/8" |
| Suction Line | 1 1/8" |
| Liquid Valve Size | 3/8" |
| Max Breaker Size | 45 amps |
| Min. Breaker Size | 26.3 amps |
| Tonnage | 5 Ton |
| Valve Type | Sweat |
| Style | A-Coil |
| Suction Line Insulation Thickness | 1/2" |
| Length | 50 feet |
Frequently Asked Questions
Affiliate disclosure: IndustrialRank earns a commission on qualifying purchases at no extra cost to you. We only recommend products we have independently reviewed.